There is a step by step tutorial to use openVPN is FreePBX
I saw that the dir / etc / openvpn exists but is empty …
I saw that already exists in init need to start it …
But I want to find documentation to configure
You need to copy the sample server configuration to /etc/openvpn/server.conf
Then all of your configuration will be done in that file. You’ll need to create your ca, keys, cert and dh file and point to them in the server.conf
Can you link to the tutorial you are following?
I’m still following any tutorial
You can recommend a suitable tutorial?
What phones are you trying to use?
Grandstream normally, I would actually be able to use any phone behind a router openVPN I was thinking about that now supports Asus openVPN
then made
attaching the need for those facing the thing for the first time
after installing …
to configure it first:
Create key in / etc / openvpn /
openvpn --genkey --secret key.txt
Then create configuration files in / etc / openvpn / here example
secret /etc/openvpn/key.txt
table 10
verb 3
mute 10
dev tap
ifconfig 10.23.24.1 255.255.255.252
log append /var/log/openvpn.log
then start example:
openvpn --config /etc/openvpn/server.conf
client side all the same but you have to indicate server ip and send the key …
good job 
Hi,
I have a freepbx 14. My setup gives me an empty VPN file when I download. From your post, it looks like I have to manually setup openvpn. Would you please give more detail on the setup.
Thank you
let’s try
yum install pptp
modprobe ppp_mppe
vi /etc/ppp/peers/pptpserver
file content:
pty “pptp 62.94.218.225 --nolaunchpppd”
name claudio
password paisa2009
remotename PPTP
require-mppe-128
to start pptp:
pppd call pptpserver
to stop pptp:
killall pppd
Once the VPN is active, insert the appropriate routing table, for example:
/ sbin / route add -net 192.168.17.0 netmask 255.255.255.0 gw 192.168.17.1
This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.