NOTICE[3230]chan_sip.c Unknown SIP command 'REGIS:50085TER'

Hi all,

I have the following error on asterisk with a HT-386 Grandsteam. The two ports are configured the same (except id, ports, etc…). Port 2 connects perfectly, but the port one does not. There are two remote SIP phones more and two SPhone on the same LAN working perfectly.

The asterisk get an error (about 10 times per second) saying:

NOTICE [3222] chan_sip.c: Unknown SIP command ‘REGIS: 50085TER’ from 'xxx.xxx.xxx.xxx: 50084’
or
NOTICE [3230] chan_sip.c: Unknown SIP command ‘REGIS: 54656TER’ from 'xxx.xxx.xxx.xxx: 54655’
NOTICE [3230] chan_sip.c: Unknown SIP command ‘REGIS: 54659TER’ from ‘xxx.xxx.xxx.xxx: 54658’

(the ip addres was cleared intencionaly)

I’ve looked everywhere and can not find the error. I cann’t to update the firmware, apparently not find the server “firmware.grandstream.com” and do not know what I’m doing wrong.

Regards!


Hola a todos,

Tengo el siguiente error en un Grandsteam HT-386. Los dos puertos están configurados igual (salvo lo que es de cada uno, id, puertos, etc.). El puerto 2 se conecta perfectamente, pero el uno no lo hace. Son remotos y hay otros dos teléfonos SIP más en esa LAN y dos SPhone que funcionan perfectamente.

En el asterisk sale un error (unas 10 veces por segundo) diciendo:

NOTICE[3222] chan_sip.c: Unknown SIP command ‘REGIS:50085TER’ from 'xxx.xxx.xxx.xxx:50084
ó
NOTICE[3230] chan_sip.c: Unknown SIP command ‘REGIS:54656TER’ from 'xxx.xxx.xxx.xxx:54655
NOTICE[3230] chan_sip.c: Unknown SIP command ‘REGIS:54659TER’ from ‘xxx.xxx.xxx.xxx:54658

He tapado la IP pero el resto sale así, se mezcla en el comando la palabra REGISTER con el puerto en donde intenta conectarse…

He buscado por todos lados y no encuentro el error. Tampoco he podido actualizar el firmware, aparentemente no encuentra el servidor “firmware.grandstream.com” y no se que estoy haciendo mal.

Saludos!