Not loading T1 card on boot?

I have a Digium 1TE133F that isn’t loading on boot, if I set line /etc/modprobe.d/dahdi.conf to
options wcte13xp default_linemode=t1 the card shows up in DAHDI config and I am able to use the module… however once the system reboots it seems the DAHDI module is overwriting the settings. I tried setting wcte13xp default_linemode=t1 under Modprobe settings in the DAHDI module however that did not seem to save it either. Also if the card is not loaded the DAHDI module is not useable, none of the settings buttons work until I manually start the card.