Hi All!
I downloaded and installed the AstrixNow distribution. I have an AEX2400 filled with FXS modules and I am trying to create the extensions in FreePBX. I am getting an error when trying to create a DAHDi extension that none are available.
I have already updated everything that yum would update, I upgraded to Asterisk 1.8 and I have run all the updates in FreePBX which brings it to 2.9.0beta1.10.
In the web interface under Setup->Basic->DAHDi it seems to find the card and all of the channels: (FXS Ports 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24).
Under the Asterisk CLI for dahdi show status and show channels I get the following:
switchboardCLI> dahdi show status
Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
Wildcard AEX2400 Board 1 OK 0 0 0 CAS Unk 0 db (CSU)/0-133 feet (DSX-1)
switchboardCLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
switchboard*CLI>
I include 3 of the conf files below.
Any assistance or direction would be greatly appreciated.
Regards,
Bismark
chan_dahdi.conf:
; Copied from DAHDI Module of FreePBX
[general]
#include chan_dahdi_general.conf
[channels]
; include dahdi groups defined by DAHDI module of FreePBX
#include chan_dahdi_groups.conf
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
dahdi-channels.conf
; Autogenerated by /usr/sbin/dahdi_genconf on Sun Mar 6 15:32:37 2011
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
; Span 1: WCTDM/0 “Wildcard AEX2400 Board 1” (MASTER)
;;; line="1 WCTDM/0/0 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 1” <4001>
mailbox=4001
group=5
context=from-internal
channel => 1
callerid=
mailbox=
group=
context=default
;;; line="2 WCTDM/0/1 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 2” <4002>
mailbox=4002
group=5
context=from-internal
channel => 2
callerid=
mailbox=
group=
context=default
;;; line="3 WCTDM/0/2 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 3” <4003>
mailbox=4003
group=5
context=from-internal
channel => 3
callerid=
mailbox=
group=
context=default
;;; line="4 WCTDM/0/3 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 4” <4004>
mailbox=4004
group=5
context=from-internal
channel => 4
callerid=
mailbox=
group=
context=default
;;; line="5 WCTDM/0/4 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 5” <4005>
mailbox=4005
group=5
context=from-internal
channel => 5
callerid=
mailbox=
group=
context=default
;;; line="6 WCTDM/0/5 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 6” <4006>
mailbox=4006
group=5
context=from-internal
channel => 6
callerid=
mailbox=
group=
context=default
;;; line="7 WCTDM/0/6 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 7” <4007>
mailbox=4007
group=5
context=from-internal
channel => 7
callerid=
mailbox=
group=
context=default
;;; line="8 WCTDM/0/7 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 8” <4008>
mailbox=4008
group=5
context=from-internal
channel => 8
callerid=
mailbox=
group=
context=default
;;; line="9 WCTDM/0/8 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 9” <4009>
mailbox=4009
group=5
context=from-internal
channel => 9
callerid=
mailbox=
group=
context=default
;;; line="10 WCTDM/0/9 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 10” <4010>
mailbox=4010
group=5
context=from-internal
channel => 10
callerid=
mailbox=
group=
context=default
;;; line="11 WCTDM/0/10 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 11” <4011>
mailbox=4011
group=5
context=from-internal
channel => 11
callerid=
mailbox=
group=
context=default
;;; line="12 WCTDM/0/11 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 12” <4012>
mailbox=4012
group=5
context=from-internal
channel => 12
callerid=
mailbox=
group=
context=default
;;; line="13 WCTDM/0/12 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 13” <4013>
mailbox=4013
group=5
context=from-internal
channel => 13
callerid=
mailbox=
group=
context=default
;;; line="14 WCTDM/0/13 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 14” <4014>
mailbox=4014
group=5
context=from-internal
channel => 14
callerid=
mailbox=
group=
context=default
;;; line="15 WCTDM/0/14 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 15” <4015>
mailbox=4015
group=5
context=from-internal
channel => 15
callerid=
mailbox=
group=
context=default
;;; line="16 WCTDM/0/15 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 16” <4016>
mailbox=4016
group=5
context=from-internal
channel => 16
callerid=
mailbox=
group=
context=default
;;; line="17 WCTDM/0/16 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 17” <4017>
mailbox=4017
group=5
context=from-internal
channel => 17
callerid=
mailbox=
group=
context=default
;;; line="18 WCTDM/0/17 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 18” <4018>
mailbox=4018
group=5
context=from-internal
channel => 18
callerid=
mailbox=
group=
context=default
;;; line="19 WCTDM/0/18 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 19” <4019>
mailbox=4019
group=5
context=from-internal
channel => 19
callerid=
mailbox=
group=
context=default
;;; line="20 WCTDM/0/19 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 20” <4020>
mailbox=4020
group=5
context=from-internal
channel => 20
callerid=
mailbox=
group=
context=default
;;; line="21 WCTDM/0/20 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 21” <4021>
mailbox=4021
group=5
context=from-internal
channel => 21
callerid=
mailbox=
group=
context=default
;;; line="22 WCTDM/0/21 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 22” <4022>
mailbox=4022
group=5
context=from-internal
channel => 22
callerid=
mailbox=
group=
context=default
;;; line="23 WCTDM/0/22 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 23” <4023>
mailbox=4023
group=5
context=from-internal
channel => 23
callerid=
mailbox=
group=
context=default
;;; line="24 WCTDM/0/23 FXOKS (SWEC: MG2)"
signalling=fxo_ks
callerid=“Channel 24” <4024>
mailbox=4024
group=5
context=from-internal
channel => 24
callerid=
mailbox=
group=
context=default
chan_dahdi_additional.conf
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;