No calls in or out after upgrade on freepbx

21

Sorry I had to wait 1 hour for my free account to reach the 24 hour post limit.
https://pastebin.com/r36VKXKm

22

Retransmitting #1 (no NAT) to 155.70.55.192:5100:

^^ The INVITE you are sending to them is not being responded to. The reason you can only accept inbound calls when “sip guests/anonymous calls” turned on is because there is nothing matching

So either you’re DNS is getting a bad IP or something has changed in how they send calls to you and how they are accepting calls from you.

You need to call CenturyLink, give them the number, time, etc of this call and see if they can find it in their logs. Or better yet, do real time testing so they can watch and verify your INVITE is even reaching them.

23

Could this be a firewall issue on my side then? I mean nothing has changed but you never know how things are after upgrades.

24

Could be but incoming calls are making it to the PBX so that would imply they are getting past the firewall. Call CenturyLink and confirm they are getting your INVITEs.

25

Okay will do thank you.

26

Everything now points to a firewall issue. Anyone know the settings for a cisco asa 5505?

27

Okay now I had a cisco engineer in the system for a couple hours and everything in the firewall is fine and passing traffic so I have centurylink saying they don’t see the call, Cisco saying it makes it out and FreePBX support saying it has to be one of the other two guys… So anyone else have an idea? Here are the last logs for the night.
<— SIP read from UDP:10.10.20.1:5060 —>
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bKe15eaa07679224DE
From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918
To: sip:[email protected];user=phone
CSeq: 1 INVITE
Call-ID: [email protected]
Contact: sip:[email protected]
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER
User-Agent: PolycomSoundPointIP-SPIP_331-UA/4.0.14.0987
Accept-Language: en
Supported: 100rel,replaces
Allow-Events: conference,talk,hold
Max-Forwards: 70
Content-Type: application/sdp
Content-Length: 294

v=0
o=- 1540001186 1540001186 IN IP4 10.10.20.1
s=Polycom IP Phone
c=IN IP4 10.10.20.1
t=0 0
a=sendrecv
m=audio 2236 RTP/AVP 117 0 8 18 127
a=rtpmap:117 L16/16000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:127 telephone-event/8000
<------------->

e[Kglazierpbx*CLI>
e[0K— (15 headers 13 lines) —
Sending to 10.10.20.1:5060 (NAT)
Sending to 10.10.20.1:5060 (NAT)
Using INVITE request as basis request - [email protected]
Found peer ‘114’ for ‘114’ from 10.10.20.1:5060

<— Reliably Transmitting (no NAT) to 10.10.20.1:5060 —>
SIP/2.0 401 Unauthorized

Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bKe15eaa07679224DE;received=10.10.20.1

From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918

To: sip:[email protected];user=phone;tag=as390b17ae

Call-ID: [email protected]

CSeq: 1 INVITE

Server: FPBX-14.0.3.19(13.22.0)

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE

Supported: replaces, timer

WWW-Authenticate: Digest algorithm=MD5, realm=“asterisk”, nonce=“3dc81e39”

Content-Length: 0

<------------>
Scheduling destruction of SIP dialog ‘[email protected]’ in 6400 ms (Method: INVITE)

e[Kglazierpbx*CLI>
e[0K
<— SIP read from UDP:10.10.20.1:5060 —>
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bKe15eaa07679224DE
From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918
To: sip:[email protected];user=phone;tag=as390b17ae
CSeq: 1 ACK
Call-ID: [email protected]
Contact: sip:[email protected]
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER
User-Agent: PolycomSoundPointIP-SPIP_331-UA/4.0.14.0987
Accept-Language: en
Max-Forwards: 70
Content-Length: 0

<------------->

e[Kglazierpbx*CLI>
e[0K— (12 headers 0 lines) —

e[Kglazierpbx*CLI>
e[0K
<— SIP read from UDP:10.10.20.1:5060 —>
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bK96218c4a2206CAE9
From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918
To: sip:[email protected];user=phone
CSeq: 2 INVITE
Call-ID: [email protected]
Contact: sip:[email protected]
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER
User-Agent: PolycomSoundPointIP-SPIP_331-UA/4.0.14.0987
Accept-Language: en
Supported: 100rel,replaces
Allow-Events: conference,talk,hold
Authorization: Digest username=“114”, realm=“asterisk”, nonce=“3dc81e39”, uri="sip:[email protected];user=phone", response=“5cec05824982c7d1be7ee9637ec0d367”, algorithm=MD5
Max-Forwards: 70
Content-Type: application/sdp
Content-Length: 294

v=0
o=- 1540001186 1540001186 IN IP4 10.10.20.1
s=Polycom IP Phone
c=IN IP4 10.10.20.1
t=0 0
a=sendrecv
m=audio 2236 RTP/AVP 117 0 8 18 127
a=rtpmap:117 L16/16000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:127 telephone-event/8000
<------------->

e[Kglazierpbx*CLI>
e[0K— (16 headers 13 lines) —
Sending to 10.10.20.1:5060 (no NAT)

e[Kglazierpbx*CLI>
e[0KUsing INVITE request as basis request - [email protected]
Found peer ‘114’ for ‘114’ from 10.10.20.1:5060

e[Kglazierpbx*CLI>
e[0Ke[1;30m == e[0mUsing SIP RTP TOS bits 184

e[Kglazierpbx*CLI>
e[0Ke[1;30m == e[0mUsing SIP RTP CoS mark 5

e[Kglazierpbx*CLI>
e[0KFound RTP audio format 117

e[Kglazierpbx*CLI>
e[0KFound RTP audio format 0
Found RTP audio format 8

e[Kglazierpbx*CLI>
e[0KFound RTP audio format 18

e[Kglazierpbx*CLI>
e[0KFound RTP audio format 127

e[Kglazierpbx*CLI>
e[0KFound audio description format L16 for ID 117
Found audio description format PCMU for ID 0
Found audio description format PCMA for ID 8
Found audio description format G729 for ID 18
Found audio description format telephone-event for ID 127
Capabilities: us - (ulaw|alaw|gsm|g726|g722|g723|speex|speex16|speex32|siren7|adpcm|silk8|silk12|silk16|silk24|g719|g729|slin|slin12|slin16|slin24|slin32|slin44|slin48|slin96|slin192|lpc10|testlaw|none|ilbc|opus|siren14), peer - audio=(ulaw|alaw|g729|slin16)/video=(nothing)/text=(nothing), combined - (ulaw|alaw|g729|slin16)
Non-codec capabilities (dtmf): us - 0x1 (telephone-event|), peer - 0x1 (telephone-event|), combined - 0x1 (telephone-event|)
Peer audio RTP is at port 10.10.20.1:2236
Looking for 6209371447 in from-internal (domain 10.10.10.3)

e[Kglazierpbx*CLI>
e[0Ksip_route_dump: route/path hop: sip:[email protected]

e[Kglazierpbx*CLI>
e[0K
<— Transmitting (no NAT) to 10.10.20.1:5060 —>
SIP/2.0 100 Trying

Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bK96218c4a2206CAE9;received=10.10.20.1

From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918

To: sip:[email protected];user=phone

Call-ID: [email protected]

CSeq: 2 INVITE

Server: FPBX-14.0.3.19(13.22.0)

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE

Supported: replaces, timer

Contact: sip:[email protected]:5060

Content-Length: 0

<------------>

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [6209371447@from-internal:1] e[1;36mMacroe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35muser-callerid,LIMIT,EXTERNAL,e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-user-callerid:1] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mTOUCH_MONITOR=1540001186.1925e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-user-callerid:2] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mAMPUSER=114e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:3] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?reporte[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-user-callerid:4] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Set(REALCALLERIDNUM=114)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:5] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mAMPUSER=114e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:6] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?limite[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:7] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mAMPUSERCIDNAME=Opse[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:8] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(__CIDMASQUERADING=TRUE)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:9] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?reporte[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:10] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mAMPUSERCID=114e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:11] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__DIAL_OPTIONS=HhTtre[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:12] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCALLERID(all)=“Ops” <114>e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:13] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?limite[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:14] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Set(GROUP(concurrency_limit)=114)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:15] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CHANNEL(language)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:16] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mMacro Depth is 1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:17] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?report2:macroerrore[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mGoto (macro-user-callerid,s,18)

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:18] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?continuee[0m”) in new stack
e[1;30m – e[0mGoto (macro-user-callerid,s,37)
e[1;30m – e[0mExecuting [s@macro-user-callerid:37] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCALLERID(number)=114e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:38] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCALLERID(name)=Opse[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:39] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?cnume[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:40] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCDR(cnam)=Opse[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:41] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCDR(cnum)=114e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-user-callerid:42] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCHANNEL(language)=ene[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [6209371447@from-internal:2] e[1;36mGosube[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35msub-record-check,s,1(out,6209371447,dontcare)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:1] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?initializede[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:2] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__REC_STATUS=INITIALIZEDe[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:3] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mNOW=1540001186e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:4] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__DAY=19e[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:5] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__MONTH=10e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:6] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__YEAR=2018e[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:7] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__TIMESTR=20181019-200626e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:8] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__FROMEXTEN=114e[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:9] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__MON_FMT=wave[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:10] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mRecordings initializede[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:11] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(ARG3=dontcare)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:12] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mREC_POLICY_MODE_SAVE=e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@sub-record-check:13] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(REC_STATUS=NO)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@sub-record-check:14] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m3?checkactione[0m”) in new stack
e[1;30m – e[0mGoto (sub-record-check,s,17)
e[1;30m – e[0mExecuting [s@sub-record-check:17] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?sub-record-check,out,1e[0m”) in new stack
e[1;30m – e[0mGoto (sub-record-check,out,1)
e[1;30m – e[0mExecuting [out@sub-record-check:1] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mOutbound Recording Check from 114 to 6209371447e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [out@sub-record-check:2] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mRECMODE=dontcaree[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [out@sub-record-check:3] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Goto(routewins)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mGoto (sub-record-check,out,7)
e[1;30m – e[0mExecuting [out@sub-record-check:7] e[1;36mGosube[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mrecordcheck,1(dontcare,out,6209371447)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [recordcheck@sub-record-check:1] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mStarting recording check against dontcaree[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [recordcheck@sub-record-check:2] e[1;36mGotoe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mdontcaree[0m”) in new stack
e[1;30m – e[0mGoto (sub-record-check,recordcheck,3)
e[1;30m – e[0mExecuting [recordcheck@sub-record-check:3] e[1;36mReturne[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [out@sub-record-check:8] e[1;36mReturne[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [6209371447@from-internal:3] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0 ?Set(CDR(accountcode)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [6209371447@from-internal:4] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mMOHCLASS=defaulte[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [6209371447@from-internal:5] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m_NODEST=e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [6209371447@from-internal:6] e[1;36mMacroe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mdialout-trunk,1,6209371447,offe[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:1] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mDIAL_TRUNK=1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:2] e[1;36mUserEvente[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mzulu-outbound-call,from:114,to:6209371447e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:3] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(DIAL_OPTIONS=Hhtr)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:4] e[1;36mGosubIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?sub-pincheck,s,1()e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:5] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERID(num)=114)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:6] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?disabletrunk,1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:7] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mDIAL_NUMBER=6209371447e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:8] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mDIAL_TRUNK_OPTIONS=HhTtre[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:9] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mOUTBOUND_GROUP=OUT_1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:10] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mDIAL_TRUNK_OPTIONS=Te[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:11] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?nomaxe[0m”) in new stack
e[1;30m – e[0mGoto (macro-dialout-trunk,s,13)

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:13] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?skipoutcide[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:14] e[1;36mMacroe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35moutbound-callerid,1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:1] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m114e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:2] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:3] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35moffe[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:4] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERPRES(name-pres)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:5] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERPRES(num-pres)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:6] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(REALCALLERIDNUM=114)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:7] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(AMPUSER=114)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:8] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?normcide[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mGoto (macro-outbound-callerid,s,12)

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:12] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mUSEROUTCID=e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:13] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mEMERGENCYCID=e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:14] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mTRUNKOUTCID=“7195360069”<7195360069>e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:15] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?trunkcide[0m”) in new stack
e[1;30m – e[0mGoto (macro-outbound-callerid,s,20)

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:20] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Set(CALLERID(all)=“7195360069”<7195360069>)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:21] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERID(all)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:22] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERID(all)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:23] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERPRES(name-pres)=prohib_passed_screen)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:24] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CALLERPRES(num-pres)=prohib_passed_screen)e[0m”) in new stack

28

And the rest

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:25] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCDR(outbound_cnum)=7195360069e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outbound-callerid:26] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCDR(outbound_cnam)=7195360069e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:15] e[1;36mGosubIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?sub-flp-1,s,1()e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:16] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mOUTNUM=6209371447e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:17] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mcustom=SIP/Centurylink_SIPe[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:18] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:19] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:20] e[1;36mMacroe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mdialout-trunk-predial-hook,e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk-predial-hook:1] e[1;36mSIPAddHeadere[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mP-Asserted-Identity: “7194007554” sip:[email protected]e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk-predial-hook:2] e[1;36mMacroExite[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:21] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?skipcrme[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:22] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__CRM_DIRECTION=OUTBOUNDe[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:23] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__CRM_DESTINATION=6209371447e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:24] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__CRM_SOURCE=114e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:25] e[1;36mAGIe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35msangomacrm.agie[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mLaunched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0m<SIP/114-00000701>AGI Script sangomacrm.agi completed, returning 0

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:26] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCHANNEL(hangup_handler_push)=crm-hangup,s,1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:27] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mCRM Finishede[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:28] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?bypass,1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:29] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Set(CONNECTEDLINE(num,i)=6209371447)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:30] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Set(CONNECTEDLINE(name,i)=CID:7195360069)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:31] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)7195360069)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:32] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?customtrunke[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-dialout-trunk:33] e[1;36mDiale[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mSIP/Centurylink_SIP/6209371447,300,Tb(func-apply-sipheaders^s^1)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m == e[0mUsing SIP RTP TOS bits 184
e[1;30m == e[0mUsing SIP RTP CoS mark 5

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mSIP/Centurylink_SIP-00000702 Internal Gosub(func-apply-sipheaders,s,1) start
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:1] e[1;36mExecIfe[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35m0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:2] e[1;36mUserEvente[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35mzulu-call-b,type:func-apply-sipheaders,to:,from:114e[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:3] e[1;36mNoOpe[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35mApplying SIP Headers to channele[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:4] e[1;36mSete[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35mSIPHEADERKEYS=e[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:5] e[1;36mExecIfe[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35m0?Set(Rheader=1)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:6] e[1;36mWhilee[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35m0e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mJumping to priority 10
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:11] e[1;36mExecIfe[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35m0?SIPRemoveHeader(Alert-Info:)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:12] e[1;36mExecIfe[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35m0?Set(PJSIP_HEADER(remove,Alert-Info)=)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@func-apply-sipheaders:13] e[1;36mReturne[0m(“e[1;35mSIP/Centurylink_SIP-00000702e[0m”, “e[1;35me[0m”) in new stack
e[1;30m == e[0mSpawn extension (from-trunk, 6209371447, 1) exited non-zero on ‘SIP/Centurylink_SIP-00000702’
e[1;30m – e[0mSIP/Centurylink_SIP-00000702 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mCalled SIP/Centurylink_SIP/6209371447

e[Kglazierpbx*CLI>
e[0KReliably Transmitting (no NAT) to 10.10.20.1:5060:
OPTIONS sip:[email protected] SIP/2.0

Via: SIP/2.0/UDP 10.10.10.3:5060;branch=z9hG4bK73ce5ed5

Max-Forwards: 70

From: “Unknown” sip:[email protected];tag=as4e9efbca

To: sip:[email protected]

Contact: sip:[email protected]:5060

Call-ID: [email protected]:5060

CSeq: 102 OPTIONS

User-Agent: FPBX-14.0.3.19(13.22.0)

Date: Sat, 20 Oct 2018 02:06:57 GMT

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE

Supported: replaces, timer

Content-Length: 0

e[Kglazierpbx*CLI>
e[0K
<— SIP read from UDP:10.10.20.1:5060 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.10.10.3:5060;branch=z9hG4bK73ce5ed5
From: “Unknown” sip:[email protected];tag=as4e9efbca
To: “Ops” sip:[email protected];tag=8611F8F5-9FD9C91C
CSeq: 102 OPTIONS
Call-ID: [email protected]:5060
Contact: sip:[email protected]
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER
Supported: 100rel,replaces,100rel,timer,replaces,norefersub
User-Agent: PolycomSoundPointIP-SPIP_331-UA/4.0.14.0987
Accept-Language: en
Accept: application/sdp,text/plain,message/sipfrag,application/dialog-info+xml
Accept-Encoding: identity
Content-Length: 0

<------------->

e[Kglazierpbx*CLI>
e[0K— (14 headers 0 lines) —
Really destroying SIP dialog ‘[email protected]:5060’ Method: OPTIONS

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mSIP/Centurylink_SIP-00000702 is circuit-busy

e[Kglazierpbx*CLI>
e[0Ke[1;30m == e[0mEveryone is busy/congested at this time (1:0/1/0)
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:34] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mDial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 0e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-dialout-trunk:35] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?continue,1:s-CONGESTION,1e[0m”) in new stack
e[1;30m – e[0mGoto (macro-dialout-trunk,s-CONGESTION,1)
e[1;30m – e[0mExecuting [s-CONGESTION@macro-dialout-trunk:1] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mRC=0e[0m”) in new stack
e[1;30m – e[0mExecuting [s-CONGESTION@macro-dialout-trunk:2] e[1;36mGotoe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0,1e[0m”) in new stack
e[1;30m – e[0mGoto (macro-dialout-trunk,0,1)
e[1;30m – e[0mExecuting [0@macro-dialout-trunk:1] e[1;36mGotoe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mcontinue,1e[0m”) in new stack
e[1;30m – e[0mGoto (macro-dialout-trunk,continue,1)
e[1;30m – e[0mExecuting [continue@macro-dialout-trunk:1] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mTRUNK Dial failed due to CONGESTION HANGUPCAUSE: 0 - failing through to other trunkse[0m”) in new stack
e[1;30m – e[0mExecuting [continue@macro-dialout-trunk:2] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?Set(CALLERID(number)=114)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0K[2018-10-19 20:06:58] e[1;31mWARNINGe[0m[30890]: e[1;37mchan_sip.ce[0m:e[1;37m4068e[0m e[1;37mretrans_pkte[0m: Retransmission timeout reached on transmission [email protected]:5060 for seqno 102 (Critical Request) – See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 32001ms with no response
e[1;30m – e[0mExecuting [6209371447@from-internal:7] e[1;36mMacroe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35moutisbusy,e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outisbusy:1] e[1;36mProgresse[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack

e[Kglazierpbx*CLI>
e[0KAudio is at 44762
Adding codec ulaw to SDP
Adding codec alaw to SDP
Adding codec g729 to SDP

e[Kglazierpbx*CLI>
e[0KAdding codec slin16 to SDP
Adding non-codec 0x1 (telephone-event) to SDP

<— Transmitting (no NAT) to 10.10.20.1:5060 —>
SIP/2.0 183 Session Progress

Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bK96218c4a2206CAE9;received=10.10.20.1

From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918

To: sip:[email protected];user=phone;tag=as5527de84

Call-ID: [email protected]

CSeq: 2 INVITE

Server: FPBX-14.0.3.19(13.22.0)

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE

Supported: replaces, timer

Contact: sip:[email protected]:5060

Content-Type: application/sdp

Content-Length: 346

v=0

o=root 1663455998 1663455998 IN IP4 10.10.10.3

s=Asterisk PBX 13.22.0

c=IN IP4 10.10.10.3

t=0 0

m=audio 44762 RTP/AVP 0 8 18 117 127

a=rtpmap:0 PCMU/8000

a=rtpmap:8 PCMA/8000

a=rtpmap:18 G729/8000

a=fmtp:18 annexb=no

a=rtpmap:117 L16/16000

a=rtpmap:127 telephone-event/8000

a=fmtp:127 0-16

a=ptime:20

a=maxptime:70

a=sendrecv

<------------>

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outisbusy:2] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?emergency,1e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-outisbusy:3] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?intracompany,1e[0m”) in new stack
e[1;30m – e[0mExecuting [s@macro-outisbusy:4] e[1;36mPlaybacke[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mall-circuits-busy-now&please-try-call-later, noanswere[0m”) in new stack
e[1;30m – e[0m<SIP/114-00000701> Playing ‘all-circuits-busy-now.ulaw’ (language ‘en’)

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0m<SIP/114-00000701> Playing ‘please-try-call-later.ulaw’ (language ‘en’)

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-outisbusy:5] e[1;36mCongestione[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m20e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0K
<— Reliably Transmitting (no NAT) to 10.10.20.1:5060 —>
SIP/2.0 503 Service Unavailable

Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bK96218c4a2206CAE9;received=10.10.20.1

From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918

To: sip:[email protected];user=phone;tag=as5527de84

Call-ID: [email protected]

CSeq: 2 INVITE

Server: FPBX-14.0.3.19(13.22.0)

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE

Supported: replaces, timer

Content-Length: 0

<------------>
[2018-10-19 20:07:02] e[1;31mWARNINGe[0m[19999][C-00000793]: e[1;37mchannel.ce[0m:e[1;37m5080e[0m e[1;37mast_prode[0m: Prodding channel ‘SIP/114-00000701’ failed
e[1;30m == e[0mSpawn extension (macro-outisbusy, s, 5) exited non-zero on ‘SIP/114-00000701’ in macro ‘outisbusy’
e[1;30m == e[0mSpawn extension (from-internal, 6209371447, 7) exited non-zero on ‘SIP/114-00000701’
e[1;30m – e[0mExecuting [h@from-internal:1] e[1;36mMacroe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mhangupcalle[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-hangupcall:1] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m1?theende[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mGoto (macro-hangupcall,s,3)
e[1;30m – e[0mExecuting [s@macro-hangupcall:3] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(CDR(recordingfile)=)e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-hangupcall:4] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m monior file= e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-hangupcall:5] e[1;36mAGIe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mattendedtransfer-rec-restart.php,e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mLaunched AGI Script /var/lib/asterisk/agi-bin/attendedtransfer-rec-restart.php

e[Kglazierpbx*CLI>
e[0K
<— SIP read from UDP:10.10.20.1:5060 —>
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 10.10.20.1;branch=z9hG4bK96218c4a2206CAE9
From: “Ops” sip:[email protected];tag=585DCA51-2DA2D918
To: sip:[email protected];user=phone;tag=as5527de84
CSeq: 2 ACK
Call-ID: [email protected]
Contact: sip:[email protected]
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER
User-Agent: PolycomSoundPointIP-SPIP_331-UA/4.0.14.0987
Accept-Language: en
Max-Forwards: 70
Content-Length: 0

<------------->

e[Kglazierpbx*CLI>
e[0K— (12 headers 0 lines) —

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0m<SIP/114-00000701>AGI Script attendedtransfer-rec-restart.php completed, returning 0

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@macro-hangupcall:6] e[1;36mHangupe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m == e[0mSpawn extension (macro-hangupcall, s, 6) exited non-zero on ‘SIP/114-00000701’ in macro ‘hangupcall’
e[1;30m == e[0mSpawn extension (from-internal, h, 1) exited non-zero on ‘SIP/114-00000701’
e[1;30m – e[0mSIP/114-00000701 Internal Gosub(crm-hangup,s,1) start
e[1;30m – e[0mExecuting [s@crm-hangup:1] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mSending Hangup to CRMe[0m”) in new stack
e[1;30m – e[0mExecuting [s@crm-hangup:2] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mHANGUP CAUSE: 34e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@crm-hangup:3] e[1;36mExecIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?Set(__CRM_VOICEMAIL=)e[0m”) in new stack
e[1;30m – e[0mExecuting [s@crm-hangup:4] e[1;36mNoOpe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35mMASTER CHANNEL: 1540001186.1925 = 1540001186.1925e[0m”) in new stack
e[1;30m – e[0mExecuting [s@crm-hangup:5] e[1;36mGotoIfe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m0?returne[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@crm-hangup:6] e[1;36mSete[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35m__CRM_HANGUP=1e[0m”) in new stack

e[Kglazierpbx*CLI>
e[0Ke[1;30m – e[0mExecuting [s@crm-hangup:7] e[1;36mAGIe[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35msangomacrm.agie[0m”) in new stack
e[1;30m – e[0mLaunched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
e[0Ke[1;30m – e[0m<SIP/114-00000701>AGI Script sangomacrm.agi completed, returning 0
e[0Ke[1;30m – e[0mExecuting [s@crm-hangup:8] e[1;36mReturne[0m(“e[1;35mSIP/114-00000701e[0m”, “e[1;35me[0m”) in new stack
e[0Ke[1;30m == e[0mSpawn extension (from-internal, h, 1) exited non-zero on ‘SIP/114-00000701’
e[1;30m – e[0mSIP/114-00000701 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
e[0KReally destroying SIP dialog ‘[email protected]’ Method: ACK

29

Will you stop posting one sided traces. Again, the actual part to the provider is missing

30

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.