Hi,
I hope someone can help with this odd problem.
I have a TDM400 card with an FXO port and an FXS port. The FSO port is connected to the PSTN and I can make and receive calls from a SIP 'phone.
The FXS port has an analogue handset attached to it. I can make calls from the handset to both internal SIP extensions and external numbers via the PSTN. Unfortunately, If I try to call the analogue handset from a SIP extension or from an external phone via the PSTN, it rings and answers when taken off-hook but it neither sends nor receives audio.
Any assistance gratefully received,
Regards,
Dave.
This is the zaptel.conf file:
fxoks=1
fxoks=2
fxsks=3
fxsks=4
loadzone=uk
defaultzone=uk
******** end of zaptel.conf ********************
zapata-channels:
context=from-pstn
; Span 1: WCTDM/0 “Wildcard TDM400P REV I Board 1”
;;; line=“1 WCTDM/0/0”
;;; line=“2 WCTDM/0/1”
;;; line=“3 WCTDM/0/2”
;;; line="4 WCTDM/0/3"
signalling=fxs_ks
immediate=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
relaxdtmf=yes
rxwink=300
rxgain=0.0
txgain=0.0
language=uk
callerid=asreceived
group=0
context=from-zaptel
cidsignalling=v23
cidstart=polarity
faxdetect=both
busydetect=yes
busycount=2
callprogress=yes
ukcallerid=yes
channel => 4
********** end of zapata-channels *****************
zapata_additional:
; do not edit this file, this is an auto-generated file by freepbx
; all modifications must be done from the web gui
;;;;;;[3501]
signalling=fxo_ks
record_out=Adhoc
record_in=Adhoc
[email protected]
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
dial=ZAP/1
context=from-internal
callprogress=no
callerid=device <3501>
busydetect=no
busycount=7
accountcode=
channel=>1
************* end of zapata_additional *************************