Newbie Help Please - SPA3102, POTS / PSTN and Freepbx

Hi Stewart

Thanks :slight_smile:

So on the SPA3102 I have:

  • Left port 5160 on Line1 - that is registering nicely.
  • On the PSTN settings page I have moved to port 5060. I have done this by adding a colon after the IP address in the proxy field and have updated the separate port field to 5060 too.

Iā€™m still a little confused at the PBX end. I removed the port reference from the trunk variables (as you suggested previously) but am not sure how to tell the PBX trunk to use 5060

Any pointers?



This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.