had been running Trixbox for years and decided to try our AsteriskNow. Basic SFF machine, installed latest ISO of 1.5.0 and I have a single TDM400P which seems to have been recognized. I have 2 FXS ports and one FXO connected to my PSTN.
but I am having trouble setting up FreePBX and the basic inbound/outbound routes.
I think I need to first add/create the Zap extension, but I am unclear as to the settings
and then I believe I can configure the incoming route?
Would it be possible for someone to provide me with the settings, or maybe a link to a howto? I cant seem to find anything online to help with this that does assume a great deal of previous knowledge.
Thanks to anyone that can help
dahdi_scan
[1]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 04 Slot 01
basechan=1
totchans=4
irq=66
type=analog
port=1,FXS
port=2,FXS
port=3,none
port=4,FXO