Newbie= can not get calls in to the Cisco 7940

hello
i have follow problem:
i can call whit my Cisco 7940-g phone to external nr.( Trunk and outbound work) but i don`t get phone call is to the phone (not external about also not internal). but if i change the inbound to Phonebook Directory than i can get in too my system. what i have miss and what i must change ??

info about the cisco phone

Firmware
application load id
PoS3-08-11-00
boot load id
Pc030301
dsp load id
4.0(5.0)[A0]

Log for asterisk about dont can ( sorry for the log log i dont know whay you guys need)

[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:1] NoOp(“SIP/mysipnr-08a358b0”, “Catch-All DID Match - Found mysipnr - You probably want a DID for this.”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:2] Goto(“SIP/mysipnr-08a358b0”, “ext-did|s|1”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Goto (ext-did,s,1)
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:1] Set(“SIP/mysipnr-08a358b0”, “__FROM_DID=s”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:2] GotoIf(“SIP/mysipnr-08a358b0”, “1 ?cidok”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Goto (ext-did,s,4)
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:4] NoOp(“SIP/mysipnr-08a358b0”, "CallerID is “Mymobilephonere” ") in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:5] Set(“SIP/mysipnr-08a358b0”, “FAX_RX=disabled”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:6] Set(“SIP/mysipnr-08a358b0”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:7] SetCallerPres(“SIP/mysipnr-08a358b0”, “allowed_not_screened”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:8] Goto(“SIP/mysipnr-08a358b0”, “from-did-direct|3001|1”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Goto (from-did-direct,3001,1)
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:1] Macro(“SIP/mysipnr-08a358b0”, “exten-vm|novm|3001”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:1] Macro(“SIP/mysipnr-08a358b0”, “user-callerid”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:1] Set(“SIP/mysipnr-08a358b0”, “AMPUSER=Mymobilephonere”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:2] GotoIf(“SIP/mysipnr-08a358b0”, “0?report”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:3] ExecIf(“SIP/mysipnr-08a358b0”, “1|Set|REALCALLERIDNUM=Mymobilephonere”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: ExecIf
[Mar 5 14:51:58] DEBUG[3676] func_db.c: DB: DEVICE/Mymobilephonenr/user not found in database.
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:4] Set(“SIP/mysipnr-08a358b0”, “AMPUSER=”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] DEBUG[3676] func_db.c: DB: AMPUSER//cidname not found in database.
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:5] Set(“SIP/mysipnr-08a358b0”, “AMPUSERCIDNAME=”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:6] GotoIf(“SIP/mysipnr-08a358b0”, “1?report”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Goto (macro-user-callerid,s,10)
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:10] GotoIf(“SIP/mysipnr-08a358b0”, “0?continue”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:11] Set(“SIP/mysipnr-08a358b0”, “__TTL=64”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:12] GotoIf(“SIP/mysipnr-08a358b0”, “1?continue”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Goto (macro-user-callerid,s,19)
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:19] NoOp(“SIP/mysipnr-08a358b0”, “Using CallerID “0Mymobilephonere” “) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Noop
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Macro
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:2] Set(“SIP/31707113517-08a358b0”, “RingGroupMethod=none”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:3] Set(“SIP/mysipnr-08a358b0”, “VMBOX=novm”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:4] Set(“SIP/mysipnr-08a358b0”, “EXTTOCALL=3001”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] DEBUG[3676] func_db.c: DB: CFU/3001 not found in database.
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:5] Set(“SIP/mysipnr-08a358b0”, “CFUEXT=”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] DEBUG[3676] func_db.c: DB: CFB/3001 not found in database.
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:6] Set(“SIP/mysipnr-08a358b0”, “CFBEXT=”) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:7] Set(“SIP/mysipnr-08a358b0”, “RT=”””) in new stack
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:8] Macro(“SIP/mysipnr-08a358b0”, “record-enable|3001|IN”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:1] GotoIf(“SIP/mysipnr-08a358b0”, “1?check”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Goto (macro-record-enable,s,4)
[Mar 5 14:51:58] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Executing [[email protected]:4] AGI(“SIP/mysipnr-08a358b0”, “recordingcheck|20100305-145158|1267818718.62”) in new stack
[Mar 5 14:51:58] VERBOSE[3676] logger.c: – Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
[Mar 5 14:51:59] VERBOSE[3676] logger.c: recordingcheck|20100305-145158|1267818718.62: Inbound recording not enabled
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – AGI Script recordingcheck completed, returning 0
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: AGI
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:5] MacroExit(“SIP/31707113517-08a358b0”, “”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Macro
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:9] Macro(“SIP/mysipnr-08a358b0”, “dial||tr|3001”) in new stack
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:1] GotoIf(“SIP/mysipnr-08a358b0”, “1?dial”) in new stack
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Goto (macro-dial,s,3)
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:3] AGI(“SIP/mysipnr-08a358b0”, “dialparties.agi”) in new stack
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 5 14:51:59] VERBOSE[3676] logger.c: dialparties.agi: Starting New Dialparties.agi
[Mar 5 14:51:59] VERBOSE[3679] logger.c: == Parsing ‘/etc/asterisk/manager.conf’: [Mar 5 14:51:59] VERBOSE[3679] logger.c: Found
[Mar 5 14:51:59] VERBOSE[3679] logger.c: == Parsing ‘/etc/asterisk/manager_additional.conf’: [Mar 5 14:51:59] VERBOSE[3679] logger.c: Found
[Mar 5 14:51:59] VERBOSE[3679] logger.c: == Parsing ‘/etc/asterisk/manager_custom.conf’: [Mar 5 14:51:59] VERBOSE[3679] logger.c: Found
[Mar 5 14:51:59] VERBOSE[3679] logger.c: == Manager ‘admin’ logged on from 127.0.0.1
[Mar 5 14:51:59] VERBOSE[3676] logger.c: dialparties.agi: Caller ID name is ‘0645326841’ number is ‘Mymobilephnoenr’
[Mar 5 14:51:59] VERBOSE[3676] logger.c: dialparties.agi: Methodology of ring is ‘none’
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – dialparties.agi: Added extension 3001 to extension map
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – dialparties.agi: Extension 3001 cf is disabled
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – dialparties.agi: Extension 3001 do not disturb is disabled
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – dialparties.agi: dbset CALLTRACE/3001 to 0645326841
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – dialparties.agi: Filtered ARG3: 3001
[Mar 5 14:51:59] VERBOSE[3679] logger.c: == Manager ‘admin’ logged off from 127.0.0.1
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – AGI Script dialparties.agi completed, returning 0
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: AGI
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:7] Dial(“SIP/mysipnr-08a358b0”, “SIP/3001||tr”) in new stack
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Called 3001
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – SIP/3001-08a70fb8 is circuit-busy
[Mar 5 14:51:59] VERBOSE[3676] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Dial
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:8] Set(“SIP/mysipnr-08a358b0”, “DIALSTATUS=CONGESTION”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:9] GosubIf(“SIP/31707113517-08a358b0”, “0?CONGESTION|1”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GosubIf
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Macro
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:10] GotoIf(“SIP/mysipnr-08a358b0”, “0?exit|return”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:11] Set(“SIP/mysipnr-08a358b0”, “SV_DIALSTATUS=CONGESTION”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:12] GosubIf(“SIP/mysipnr-08a358b0”, “0?docfu|1”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GosubIf
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:13] GosubIf(“SIP/31707113517-08a358b0”, “0?docfb|1”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GosubIf
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:14] Set(“SIP/mysipnr-08a358b0”, “DIALSTATUS=CONGESTION”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:15] NoOp(“SIP/31707113517-08a358b0”, “Voicemail is novm”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: NoOp
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:16] GotoIf(“SIP/31707113517-08a358b0”, “1?s-CONGESTION|1”) in new stack
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Goto (macro-exten-vm,s-CONGESTION,1)
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:1] NoOp(“SIP/mysipnr-08a358b0”, "IVR_RETVM: IVR_CONTEXT: ") in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Noop
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:2] GotoIf(“SIP/mysipnr-08a358b0”, “0?exit|1”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:3] PlayTones(“SIP/mysipnr-08a358b0”, “congestion”) in new stack
[Mar 5 14:51:59] DEBUG[3676] app_macro.c: Executed application: Playtones
[Mar 5 14:51:59] VERBOSE[3676] logger.c: – Executing [[email protected]:4] Congestion(“SIP/mysipnr-08a358b0”, “10”) in new stack
[Mar 5 14:51:59] VERBOSE[3676] logger.c: == Spawn extension (macro-exten-vm, s-CONGESTION, 4) exited non-zero on ‘SIP/mysipnr-08a358b0’ in macro ‘exten-vm’
[Mar 5 14:51:59] VERBOSE[3676] logger.c: == Spawn extension (from-did-direct, 3001, 1) exited non-zero on ‘SIP/mysipnr-08a358b0’
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] NoOp(“SIP/mysipnr-08a358b0”, “Catch-All DID Match - Found mysipnr- You probably want a DID for this.”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:2] Goto(“SIP/mysipnr-08a358b0”, “ext-did|s|1”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (ext-did,s,1)
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] Set(“SIP/mysipnr-08a358b0”, “__FROM_DID=s”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:2] GotoIf(“SIP/mysipnr-08a358b0”, “0 ?cidok”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:3] Set(“SIP/mysipnr-08a358b0”, “CALLERID(name)=0645326841”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:4] NoOp(“SIP/mysipnr-08a358b0”, “CallerID is “0645326841” <0645326841>”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:5] Set(“SIP/mysipnr-08a358b0”, “FAX_RX=disabled”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:6] Set(“SIP/mysipnr-08a358b0”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:7] SetCallerPres(“SIP/mysipnr-08a358b0”, “allowed_not_screened”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:8] Goto(“SIP/mysipnr-08a358b0”, “from-did-direct|3001|1”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (from-did-direct,3001,1)
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] Macro(“SIP/mysipnr-08a358b0”, “exten-vm|novm|3001”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] Macro(“SIP/mysipnr-08a358b0”, “user-callerid”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] Set(“SIP/31707113517-08a358b0”, “AMPUSER=0645326841”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:2] GotoIf(“SIP/mysipnr-08a358b0”, “0?report”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:3] ExecIf(“SIP/mysipnr-08a358b0”, “1|Set|REALCALLERIDNUM=0645326841”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: ExecIf
[Mar 5 14:51:59] DEBUG[3680] func_db.c: DB: DEVICE/0645326841/user not found in database.
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:4] Set(“SIP/mysipnr-08a358b0”, “AMPUSER=”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] DEBUG[3680] func_db.c: DB: AMPUSER//cidname not found in database.
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:5] Set(“SIP/mysipnr-08a358b0”, “AMPUSERCIDNAME=”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:6] GotoIf(“SIP/mysipnr-08a358b0”, “1?report”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (macro-user-callerid,s,10)
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:10] GotoIf(“SIP/mysipnr-08a358b0”, “0?continue”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:11] Set(“SIP/mysipnr-08a358b0”, “__TTL=64”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:12] GotoIf(“SIP/mysipnr-08a358b0”, “1?continue”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (macro-user-callerid,s,19)
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:19] NoOp(“SIP/mysipnr-08a358b0”, “Using CallerID “Mymobilephonere” “) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Noop
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Macro
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:2] Set(“SIP/mysipnr-08a358b0”, “RingGroupMethod=none”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:3] Set(“SIP/mysipnr-08a358b0”, “VMBOX=novm”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:4] Set(“SIP/mysipnr-08a358b0”, “EXTTOCALL=3001”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] DEBUG[3680] func_db.c: DB: CFU/3001 not found in database.
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:5] Set(“SIP/mysipnr-08a358b0”, “CFUEXT=”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] DEBUG[3680] func_db.c: DB: CFB/3001 not found in database.
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:6] Set(“SIP/mysipnr-08a358b0”, “CFBEXT=”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:7] Set(“SIP/mysipnr-08a358b0”, “RT=”””) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:8] Macro(“SIP/mysipnr-08a358b0”, “record-enable|3001|IN”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] GotoIf(“SIP/mysipnr-08a358b0”, “1?check”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (macro-record-enable,s,4)
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:4] AGI(“SIP/mysipnr-08a358b0”, “recordingcheck|20100305-145159|1267818719.64”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
[Mar 5 14:51:59] VERBOSE[3680] logger.c: recordingcheck|20100305-145159|1267818719.64: Inbound recording not enabled
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – AGI Script recordingcheck completed, returning 0
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: AGI
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:5] MacroExit(“SIP/mysipnr-08a358b0”, “”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Macro
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:9] Macro(“SIP/mysipnr-08a358b0”, “dial||tr|3001”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] GotoIf(“SIP/mysipnr-08a358b0”, “1?dial”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (macro-dial,s,3)
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:3] AGI(“SIP/31707113517-08a358b0”, “dialparties.agi”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 5 14:51:59] VERBOSE[3680] logger.c: dialparties.agi: Starting New Dialparties.agi
[Mar 5 14:51:59] VERBOSE[3683] logger.c: == Parsing ‘/etc/asterisk/manager.conf’: [Mar 5 14:51:59] VERBOSE[3683] logger.c: Found
[Mar 5 14:51:59] VERBOSE[3683] logger.c: == Parsing ‘/etc/asterisk/manager_additional.conf’: [Mar 5 14:51:59] VERBOSE[3683] logger.c: Found
[Mar 5 14:51:59] VERBOSE[3683] logger.c: == Parsing ‘/etc/asterisk/manager_custom.conf’: [Mar 5 14:51:59] VERBOSE[3683] logger.c: Found
[Mar 5 14:51:59] VERBOSE[3683] logger.c: == Manager ‘admin’ logged on from 127.0.0.1
[Mar 5 14:51:59] VERBOSE[3680] logger.c: dialparties.agi: Caller ID name is ‘0645326841’ number is ‘Mymobilephnoenr’
[Mar 5 14:51:59] VERBOSE[3680] logger.c: dialparties.agi: Methodology of ring is ‘none’
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – dialparties.agi: Added extension 3001 to extension map
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – dialparties.agi: Extension 3001 cf is disabled
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – dialparties.agi: Extension 3001 do not disturb is disabled
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – dialparties.agi: dbset CALLTRACE/3001 to Mymobilephnoenr
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – dialparties.agi: Filtered ARG3: 3001
[Mar 5 14:51:59] VERBOSE[3683] logger.c: == Manager ‘admin’ logged off from 127.0.0.1
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – AGI Script dialparties.agi completed, returning 0
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: AGI
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:7] Dial(“SIP/mysipnr-08a358b0”, “SIP/3001||tr”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Called 3001
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – SIP/3001-08a70fb8 is circuit-busy
[Mar 5 14:51:59] VERBOSE[3680] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Dial
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:8] Set(“SIP/mysipnr-08a358b0”, “DIALSTATUS=CONGESTION”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:9] GosubIf(“SIP/mysipnr-08a358b0”, “0?CONGESTION|1”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GosubIf
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Macro
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:10] GotoIf(“SIP/mysipnr-08a358b0”, “0?exit|return”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:11] Set(“SIP/mysipnr-08a358b0”, “SV_DIALSTATUS=CONGESTION”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:12] GosubIf(“SIP/mysipnr-08a358b0”, “0?docfu|1”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GosubIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:13] GosubIf(“SIP/mysipnr-08a358b0”, “0?docfb|1”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GosubIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:14] Set(“SIP/mysipnr-08a358b0”, “DIALSTATUS=CONGESTION”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Set
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:15] NoOp(“SIP/mysipnr-08a358b0”, “Voicemail is novm”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: NoOp
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:16] GotoIf(“SIP/mysipnr-08a358b0”, “1?s-CONGESTION|1”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Goto (macro-exten-vm,s-CONGESTION,1)
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:1] NoOp(“SIP/mysipnr-08a358b0”, "IVR_RETVM: IVR_CONTEXT: ") in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Noop
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:2] GotoIf(“SIP/mysipnr-08a358b0”, “0?exit|1”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: GotoIf
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:3] PlayTones(“SIP/mysipnr-08a358b0”, “congestion”) in new stack
[Mar 5 14:51:59] DEBUG[3680] app_macro.c: Executed application: Playtones
[Mar 5 14:51:59] VERBOSE[3680] logger.c: – Executing [[email protected]:4] Congestion(“SIP/mysipnr-08a358b0”, “10”) in new stack
[Mar 5 14:51:59] VERBOSE[3680] logger.c: == Spawn extension (macro-exten-vm, s-CONGESTION, 4) exited non-zero on ‘SIP/mysipnr-08a358b0’ in macro ‘exten-vm’

i hope some on have an idea.

thank`s for helping

chris

Incoming calls to your PBX follow the inbound route rules. You have to tell incoming calls where to go. You can setup a default route to go to your phone like an operator.

Outgoing calls from your PBX follow outbound routes. These are rules like dial 9 for an outside line.

It looks like you don’t have an inbound route set to go to your phone.