New ext. registered and set up but, when I try to call it Teams and Cell phone both said unavailable…
Weird thing is I can call out on the phone… I can call my cell and my Teams ext. from the phone…
I just can not call the ext…
Nothing in the logs that I can see…
I can call the phone from another internal phone… but I cannot call the phone externally…
I tried a new phone with another test ext. I am getting the same results… It seems like every new phone I set up is not working for external calls…
Can you please elaborate a bit on this? How are external callers supposed to reach the internal users?
I built a new ext and used EPM to set up Sang phone, and I can’t call the ext externally but I can call in internally…
I can’t think of an obvious way that you could have ended up with a registered device that is able to receive internal ext to ext calls, and not receive external calls thru an inbound route. You’re going to have to share a call trace via pastebin Providing Great Debug - Support Services - Documentation
I don’t think I am being clear enough ext 6719 can receive calls from other phone on FreePBX but, cannot receive calls from external numbers such as my Teams and personal cell… However ext 6719 can call out to my personal cell and Teams ext… Ext. 6719 cannot receive external calls…
When I look at the logs however when I am trying to call it. My teams says it is unavailable and my person cell says the same… I tried the disable DND but still nothing…
So I went and tried a new phone new ext… I tried a new phone old ext… I am getting same results as above
Sorry when I look at the logs they show nothing when trying to call the ext externally…
How is the call supposed to get to FreePBX in the first place?
trunk & SBC right?
Is there a limit to how many extensions I can have?
There is no hard limit and the de facto limit will be over 1,000.
Every new ext. I create and provision on new phone will not allow calls from external lines… super confusing an annoying…
You are not providing the detailed logging needed to make any progress on this.
Could that be because FreePBX updated certs?
Failed to authenticate relates to the password level authentication, not any TLS authentication. The failure for 11203 appears to be due to a mismatched password.
11201 doesn’t seem to exist, at all.
old analog tele…
Something seems to be trying to register as it using SIP.
It looks to me as though all the registers are coming from 10.112.0.250. That rings alarm bells. I think this is a router with a SIP Application Level Gateway (SIP ALG). You need to disable that.
Also, it is not helpful to keep deleting logs. The replies won’t make sense without them.
[root@mahpbx1 ~]# tail -f /var/log/asterisk/full
[2022-08-30 20:40:00] VERBOSE[61053][C-00000028] app_dial.c: Local/904023@zulu-desktop-phone-000000a2;1 connected line has changed. Saving it until answer for Local/904023@zulu-call-000000a1;2
[2022-08-30 20:40:00] VERBOSE[61049][C-00000028] app_dial.c: Local/904023@zulu-call-000000a1;1 is ringing
[2022-08-30 20:40:00] VERBOSE[37549] netsock2.c: Using SIP RTP Audio TOS bits 184
[2022-08-30 20:40:00] VERBOSE[37549] netsock2.c: Using SIP RTP Audio TOS bits 184 in TCLASS field.
[2022-08-30 20:40:00] VERBOSE[37549] netsock2.c: Using SIP RTP Audio CoS mark 5
[2022-08-30 20:40:00] VERBOSE[37549] res_rtp_asterisk.c: DTLS ECDH initialized (automatic), faster PFS enabled
[2022-08-30 20:40:00] VERBOSE[61054][C-00000028] app_dial.c: PJSIP/904023-00000082 is ringing
[2022-08-30 20:40:00] VERBOSE[61054][C-00000028] app_dial.c: PJSIP/904023-00000082 is ringing
[2022-08-30 20:40:00] VERBOSE[61053][C-00000028] app_dial.c: Local/904023@zulu-desktop-phone-000000a2;1 is ringing
[2022-08-30 20:40:07] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - Failed to authenticate
[2022-08-30 20:40:09] VERBOSE[37549] res_pjsip/pjsip_configuration.c: Endpoint 2251 is now Unreachable
[2022-08-30 20:40:09] VERBOSE[37549] res_pjsip/pjsip_options.c: Contact 2251/sip:[email protected]:5060 is now Unreachable. RTT: 0.000 msec
[2022-08-30 20:40:09] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - Failed to authenticate
[2022-08-30 20:40:09] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - No matching endpoint found after 5 tries in 1.799 ms
[2022-08-30 20:40:09] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - No matching endpoint found after 6 tries in 1.999 ms
[2022-08-30 20:40:09] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - No matching endpoint found after 7 tries in 2.052 ms
[2022-08-30 20:40:09] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - Failed to authenticate
[2022-08-30 20:40:10] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - No matching endpoint found after 8 tries in 2.799 ms
[2022-08-30 20:40:10] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - No matching endpoint found after 9 tries in 2.851 ms
[2022-08-30 20:40:10] NOTICE[37549] res_pjsip/pjsip_distributor.c: Request ‘REGISTER’ from ‘sip:[email protected]’ failed for ‘10.112.0.250:5060’ (callid: [email protected]) - Failed to authenticate
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] res_musiconhold.c: Stopped music on hold on PJSIP/Mediant1000-00000076
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:52] Macro(“PJSIP/Mediant1000-00000076”, “blkvm-clr,”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-clr:1] Set(“PJSIP/Mediant1000-00000076”, “SHARED(BLKVM,PJSIP/Mediant1000-00000076)=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-clr:2] Set(“PJSIP/Mediant1000-00000076”, “GOSUB_RETVAL=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-clr:3] MacroExit(“PJSIP/Mediant1000-00000076”, “”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:53] Gosub(“PJSIP/Mediant1000-00000076”, “sub-record-cancel,s,1()”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-cancel:1] Return(“PJSIP/Mediant1000-00000076”, “”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:54] Set(“PJSIP/Mediant1000-00000076”, “__NODEST=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:55] Set(“PJSIP/Mediant1000-00000076”, “_QUEUE_PRIO=0”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:56] Set(“PJSIP/Mediant1000-00000076”, “__CWIGNORE=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:57] Set(“PJSIP/Mediant1000-00000076”, “QDEST=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:58] Set(“PJSIP/Mediant1000-00000076”, “VQ_DEST=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4010@ext-queues:59] GotoIf(“PJSIP/Mediant1000-00000076”, “1?ext-queues,4015,1:,”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (ext-queues,4015,1)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:1] Macro(“PJSIP/Mediant1000-00000076”, “user-callerid,”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:1] Set(“PJSIP/Mediant1000-00000076”, “TOUCH_MONITOR=1661891809.386”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:2] Set(“PJSIP/Mediant1000-00000076”, “CHANCONTEXT=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:3] Set(“PJSIP/Mediant1000-00000076”, “CHANCONTEXT=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:4] Set(“PJSIP/Mediant1000-00000076”, “CHANEXTENCONTEXT=Mediant1000-00000076”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:5] Set(“PJSIP/Mediant1000-00000076”, “CHANEXTEN=Mediant1000-00000076”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:6] Set(“PJSIP/Mediant1000-00000076”, “CALLERID(number)=3204913512”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:7] Set(“PJSIP/Mediant1000-00000076”, “AMPUSER=3204913512”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:8] Set(“PJSIP/Mediant1000-00000076”, “HOTDESCKCHAN=Mediant1000-00000076”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:9] Set(“PJSIP/Mediant1000-00000076”, “HOTDESKEXTEN=Mediant1000”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:10] Set(“PJSIP/Mediant1000-00000076”, “HOTDESKCALL=0”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:11] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(HOTDESKCALL=1)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:12] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(CALLERID(name)=)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:13] GotoIf(“PJSIP/Mediant1000-00000076”, “0?report”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:14] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(REALCALLERIDNUM=3204913512)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:15] Set(“PJSIP/Mediant1000-00000076”, “AMPUSER=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:16] GotoIf(“PJSIP/Mediant1000-00000076”, “0?limit”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:17] Set(“PJSIP/Mediant1000-00000076”, “AMPUSERCIDNAME=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:18] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:19] GotoIf(“PJSIP/Mediant1000-00000076”, “1?report”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (macro-user-callerid,s,28)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:28] NoOp(“PJSIP/Mediant1000-00000076”, “Macro Depth is 1”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:29] GotoIf(“PJSIP/Mediant1000-00000076”, “1?report2:macroerror”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (macro-user-callerid,s,30)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:30] GotoIf(“PJSIP/Mediant1000-00000076”, “0?continue”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:31] ExecIf(“PJSIP/Mediant1000-00000076”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:32] Set(“PJSIP/Mediant1000-00000076”, “__TTL=61”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:33] GotoIf(“PJSIP/Mediant1000-00000076”, “1?continue”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (macro-user-callerid,s,49)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:49] Set(“PJSIP/Mediant1000-00000076”, “CALLERID(number)=3204913512”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:50] Set(“PJSIP/Mediant1000-00000076”, “CALLERID(name)=Operator <<BRITTANY MEISSN”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:51] GotoIf(“PJSIP/Mediant1000-00000076”, “0?cnum”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:52] Set(“PJSIP/Mediant1000-00000076”, “CDR(cnam)=Operator <<BRITTANY MEISSN”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:53] Set(“PJSIP/Mediant1000-00000076”, “CDR(cnum)=3204913512”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-user-callerid:54] Set(“PJSIP/Mediant1000-00000076”, “CHANNEL(language)=en”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:2] Answer(“PJSIP/Mediant1000-00000076”, “”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:3] Macro(“PJSIP/Mediant1000-00000076”, “blkvm-set,reset”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-set:1] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(__BLKVM_CHANNEL=PJSIP/Mediant1000-00000076)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-set:2] Set(“PJSIP/Mediant1000-00000076”, “SHARED(BLKVM,PJSIP/Mediant1000-00000076)=TRUE”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-set:3] Set(“PJSIP/Mediant1000-00000076”, “GOSUB_RETVAL=TRUE”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-blkvm-set:4] MacroExit(“PJSIP/Mediant1000-00000076”, “”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:4] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(_DIAL_OPTIONS=HhTtrM(auto-blkvm)M(auto-blkvm))”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:5] Set(“PJSIP/Mediant1000-00000076”, “__NODEST=4015”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:6] Set(“PJSIP/Mediant1000-00000076”, “__QCONTEXT=0”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:7] Set(“PJSIP/Mediant1000-00000076”, “QCIDPP=Mahnomen Hotel <<”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:8] Set(“PJSIP/Mediant1000-00000076”, “VQ_CIDPP=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:9] ExecIf(“PJSIP/Mediant1000-00000076”, “1?Macro(prepend-cid,Mahnomen Hotel <<)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-prepend-cid:1] GotoIf(“PJSIP/Mediant1000-00000076”, “0?REPCID”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-prepend-cid:2] GotoIf(“PJSIP/Mediant1000-00000076”, “0?REPCID”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-prepend-cid:3] Set(“PJSIP/Mediant1000-00000076”, “CALLERID(name)=BRITTANY MEISSN”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-prepend-cid:4] Set(“PJSIP/Mediant1000-00000076”, “_RGPREFIX=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-prepend-cid:5] Set(“PJSIP/Mediant1000-00000076”, “_RGPREFIX=Mahnomen Hotel <<”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@macro-prepend-cid:6] Set(“PJSIP/Mediant1000-00000076”, “CALLERID(name)=Mahnomen Hotel <<BRITTANY MEISSN”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:10] Set(“PJSIP/Mediant1000-00000076”, “QAINFO=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:11] Set(“PJSIP/Mediant1000-00000076”, “VQ_AINFO=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:12] Set(“PJSIP/Mediant1000-00000076”, “__RVOL_MODE=dontcare”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:13] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(__ALERT_INFO=)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:14] Set(“PJSIP/Mediant1000-00000076”, “QJOINMSG=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:15] Set(“PJSIP/Mediant1000-00000076”, “VQ_JOINMSG=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:16] Set(“PJSIP/Mediant1000-00000076”, “QCANCELMISSED=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:17] Set(“PJSIP/Mediant1000-00000076”, “QRETRY=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:18] Set(“PJSIP/Mediant1000-00000076”, “VQ_RETRY=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:19] Set(“PJSIP/Mediant1000-00000076”, “QOPTIONS=t”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:20] Set(“PJSIP/Mediant1000-00000076”, “VQ_OPTIONS=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:21] Set(“PJSIP/Mediant1000-00000076”, “QGOSUB=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:22] Set(“PJSIP/Mediant1000-00000076”, “VQ_GOSUB=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:23] Set(“PJSIP/Mediant1000-00000076”, “QAGI=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:24] Set(“PJSIP/Mediant1000-00000076”, “VQ_AGI=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:25] Set(“PJSIP/Mediant1000-00000076”, “QRULE=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:26] Set(“PJSIP/Mediant1000-00000076”, “VQ_RULE=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:27] Set(“PJSIP/Mediant1000-00000076”, “QPOSITION=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:28] Set(“PJSIP/Mediant1000-00000076”, “VQ_POSITION=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:29] Gosub(“PJSIP/Mediant1000-00000076”, “sub-record-check,s,1(q,4015,dontcare)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:1] GotoIf(“PJSIP/Mediant1000-00000076”, “10?initialized”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (sub-record-check,s,10)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:10] NoOp(“PJSIP/Mediant1000-00000076”, “Recordings initialized”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:11] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(ARG3=dontcare)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:12] Set(“PJSIP/Mediant1000-00000076”, “REC_POLICY_MODE_SAVE=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:13] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(REC_STATUS=NO)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:14] GotoIf(“PJSIP/Mediant1000-00000076”, “1?checkaction”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (sub-record-check,s,17)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:17] GotoIf(“PJSIP/Mediant1000-00000076”, “0?sub-record-check,q,1”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:18] NoOp(“PJSIP/Mediant1000-00000076”, “Generic q Recording Check - 3204913512 4015”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:19] Gosub(“PJSIP/Mediant1000-00000076”, “recordcheck,1(dontcare,q,4015)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“PJSIP/Mediant1000-00000076”, “Starting recording check against dontcare”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“PJSIP/Mediant1000-00000076”, “dontcare”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“PJSIP/Mediant1000-00000076”, “”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [s@sub-record-check:20] Return(“PJSIP/Mediant1000-00000076”, “”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:30] Set(“PJSIP/Mediant1000-00000076”, “__CWIGNORE=TRUE”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:31] Set(“PJSIP/Mediant1000-00000076”, “__SIGNORE=TRUE”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:32] Set(“PJSIP/Mediant1000-00000076”, “__QC_CONFIRM=0”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:33] GotoIf(“PJSIP/Mediant1000-00000076”, “0?QVQANNOUNCE:NOQVQANNOUNCE”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx_builtins.c: Goto (ext-queues,4015,38)
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:38] Set(“PJSIP/Mediant1000-00000076”, “VQ_CONFIRMMSG=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:39] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Playback(, )”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:40] QueueLog(“PJSIP/Mediant1000-00000076”, “4015,1661891809.386,NONE,DID,2189362710”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:41] Set(“PJSIP/Mediant1000-00000076”, “QAANNOUNCE=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:42] Set(“PJSIP/Mediant1000-00000076”, “VQ_AANNOUNCE=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:43] Set(“PJSIP/Mediant1000-00000076”, “QMOH=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:44] Set(“PJSIP/Mediant1000-00000076”, “VQ_MOH=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:45] ExecIf(“PJSIP/Mediant1000-00000076”, “0?Set(__MOHCLASS=)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:46] ExecIf(“PJSIP/Mediant1000-00000076”, “1?Set(CHANNEL(musicclass)=CasinoAll)”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:47] Set(“PJSIP/Mediant1000-00000076”, “QMAXWAIT=45”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:48] Set(“PJSIP/Mediant1000-00000076”, “VQ_MAXWAIT=”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:49] Set(“PJSIP/Mediant1000-00000076”, “QUEUENUM=4015”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:50] Set(“PJSIP/Mediant1000-00000076”, “QUEUEJOINTIME=1661892014”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] pbx.c: Executing [4015@ext-queues:51] Queue(“PJSIP/Mediant1000-00000076”, “4015,t,45,”) in new stack
[2022-08-30 20:40:14] VERBOSE[59381][C-00000029] res_musiconhold.c: Started music on hold, class ‘CasinoAll’, on channel ‘PJSIP/Mediant1000-00000076’
I can’t provide a log for you for incoming calls to this ext. because nothing is produced… Any new ext I create in this PBX will not accept external calls and no log is produced