Need some help ! (Trixboxx 1.2 , TE110P , Asterisk)

Hello There !

I have a really big problem:
first of all, i have installed Trixboxx 1.2 on a Fujitsu Siemens RX220 Server without any problems ; Trixboxx found all my devices (e.g. this Digium TE110P card, both network cards, Raid Controller, and and and)

I have configured some IAX / SIP Accounts and everything went fine. Intern in my company i can phone the whole day, but if i try to dial an external number (e.g. my cell phone) asterisk tolds me that i need to wait because all my channels are busy / congested.

The same happens if i try to call from my cell phone (extern) my company number.

I should mention that This TE110P is connected to an Primär Multiplexer (i hope this is an english word, too).

if i ran the command ztcfg -vv he tolds me that i have configured 32 channels (16 should be my D-Kanal, i hope so).


//Because ive currently not the original configs
//at home, ive tried to rebuild them for you
my /etc/zaptel.conf

span=1,1,0,esf,b8zs
bchan=1-15, 17-31 # set this to 1-15,17-31 for E1
dchan=16 # set this to 16 for E1

defaultzone=nl
loadzone=nl

//Because ive currently not the original configs
//at home, ive tried to rebuild them for you
#/etc/asterisk/zapata.conf

switchtype = euroisdn
pridialplan=local
echocancel=yes

group = 0
context=local
channel => 1-2

who can help me ? :slight_smile: