had to re-install a system with a Sangoma A20002DE analog card. This is the only system I have with an analog card in it and I can’t for the life of me figure out how to configure the card in the gui. according to the wiki is should have auto detected the fxo ports. Can someone point me in the ri…

found a solution here: [image] Sangoma Card not detected Sangoma This is a me too post. Sangoma A101DE card. Same issues as the OP and others here. DAHDI config module 13.0.15 As suggested already, the following makes the card visible in FreePBX and dahdi_scan Disabl…

Need help setting up an analog FXO card

Commercial Products and Partners Sangoma

ashcortech (AshCorTech) March 28, 2020, 10:09pm 2

found a solution here:

Disable DAHDI config module
Reboot
Running “/usr/sbin/wancfg_dahdi” at the cli.
Reboot
Enable DAHDI config mdule
Reboot

Card is now visible in FreePBX!