Need Help - PRI Provider not receiving dialed digits on outgoing calls

Hi,
I have a new install of FreePBX 13 and have an issue with outgoing calls. My PRI provider sees the calls getting to them, but they are not receiving any of the dialed digits. Below is the log. Any help is greatly appreciated. Thank you in advance.

[2017-06-04 12:25:15] VERBOSE[2634][C-0000000f] netsock2.c: == Using SIP RTP TOS bits 184
[2017-06-04 12:25:15] VERBOSE[2634][C-0000000f] netsock2.c: == Using SIP RTP CoS mark 5
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@from-internal:1] Macro(“SIP/4001-0000000f”, “user-callerid,LIMIT”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/4001-0000000f”, “TOUCH_MONITOR=1496593515.29”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/4001-0000000f”, “AMPUSER=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/4001-0000000f”, “0?report”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/4001-0000000f”, “1?Set(REALCALLERIDNUM=4001)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/4001-0000000f”, “AMPUSER=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/4001-0000000f”, “0?limit”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/4001-0000000f”, “AMPUSERCIDNAME=Sales1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/4001-0000000f”, “0?report”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/4001-0000000f”, “AMPUSERCID=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/4001-0000000f”, “__DIAL_OPTIONS=Ttr”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/4001-0000000f”, “CALLERID(all)=“Sales1” <4001>”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/4001-0000000f”, “0?limit”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/4001-0000000f”, “1?Set(GROUP(concurrency_limit)=4001)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/4001-0000000f”, “0?Set(CHANNEL(language)=)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:15] GotoIf(“SIP/4001-0000000f”, “1?continue”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (macro-user-callerid,s,29)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:29] Set(“SIP/4001-0000000f”, “CALLERID(number)=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/4001-0000000f”, “CALLERID(name)=Sales1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:31] GotoIf(“SIP/4001-0000000f”, “0?cnum”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/4001-0000000f”, “CDR(cnam)=Sales1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/4001-0000000f”, “CDR(cnum)=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/4001-0000000f”, “CHANNEL(language)=en”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@from-internal:2] Set(“SIP/4001-0000000f”, “ROUTEUSER=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@from-internal:3] GotoIf(“SIP/4001-0000000f”, “1?notblind”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (from-internal,4079338000,6)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@from-internal:6] GotoIf(“SIP/4001-0000000f”, “1?restrictedroute-c4ca4238a0b923820dcc509a6f75849b,4079338000,2:outbound-allroutes,4079338000,2”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (restrictedroute-c4ca4238a0b923820dcc509a6f75849b,4079338000,2)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:2] Gosub(“SIP/4001-0000000f”, “sub-record-check,s,1(out,4079338000,dontcare)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:1] GotoIf(“SIP/4001-0000000f”, “0?initialized”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:2] Set(“SIP/4001-0000000f”, “__REC_STATUS=INITIALIZED”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:3] Set(“SIP/4001-0000000f”, “NOW=1496593515”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:4] Set(“SIP/4001-0000000f”, “__DAY=04”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:5] Set(“SIP/4001-0000000f”, “__MONTH=06”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:6] Set(“SIP/4001-0000000f”, “__YEAR=2017”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/4001-0000000f”, “__TIMESTR=20170604-122515”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:8] Set(“SIP/4001-0000000f”, “__FROMEXTEN=4001”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:9] Set(“SIP/4001-0000000f”, “__MON_FMT=wav”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:10] NoOp(“SIP/4001-0000000f”, “Recordings initialized”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/4001-0000000f”, “0?Set(ARG3=dontcare)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:12] Set(“SIP/4001-0000000f”, “REC_POLICY_MODE_SAVE=”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:13] ExecIf(“SIP/4001-0000000f”, “0?Set(REC_STATUS=NO)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:14] GotoIf(“SIP/4001-0000000f”, “3?checkaction”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (sub-record-check,s,17)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@sub-record-check:17] GotoIf(“SIP/4001-0000000f”, “1?sub-record-check,out,1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (sub-record-check,out,1)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [out@sub-record-check:1] NoOp(“SIP/4001-0000000f”, “Outbound Recording Check from 4001 to 4079338000”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [out@sub-record-check:2] Set(“SIP/4001-0000000f”, “RECMODE=dontcare”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [out@sub-record-check:3] ExecIf(“SIP/4001-0000000f”, “1?Goto(routewins)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (sub-record-check,out,7)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [out@sub-record-check:7] Gosub(“SIP/4001-0000000f”, “recordcheck,1(dontcare,out,4079338000)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [recordcheck@sub-record-check:1] NoOp(“SIP/4001-0000000f”, “Starting recording check against dontcare”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [recordcheck@sub-record-check:2] Goto(“SIP/4001-0000000f”, “dontcare”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (sub-record-check,recordcheck,3)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [recordcheck@sub-record-check:3] Return(“SIP/4001-0000000f”, “”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [out@sub-record-check:8] Return(“SIP/4001-0000000f”, “”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:3] ExecIf(“SIP/4001-0000000f”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:4] Set(“SIP/4001-0000000f”, “MOHCLASS=default”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:5] ExecIf(“SIP/4001-0000000f”, “1?Set(TRUNKCIDOVERRIDE=<4078925144>)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:6] Set(“SIP/4001-0000000f”, “_NODEST=”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [4079338000@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:7] Macro(“SIP/4001-0000000f”, “dialout-trunk,1,4079338000,off”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/4001-0000000f”, “DIAL_TRUNK=1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/4001-0000000f”, “0?sub-pincheck,s,1()”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/4001-0000000f”, “0?disabletrunk,1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/4001-0000000f”, “DIAL_NUMBER=4079338000”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/4001-0000000f”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/4001-0000000f”, “OUTBOUND_GROUP=OUT_1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/4001-0000000f”, “1?nomax”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/4001-0000000f”, “0?skipoutcid”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/4001-0000000f”, “DIAL_TRUNK_OPTIONS=T”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/4001-0000000f”, “outbound-callerid,1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/4001-0000000f”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/4001-0000000f”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:3] ExecIf(“SIP/4001-0000000f”, “0?Set(REALCALLERIDNUM=4001)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:4] GotoIf(“SIP/4001-0000000f”, “1?normcid”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (macro-outbound-callerid,s,7)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/4001-0000000f”, “USEROUTCID=”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/4001-0000000f”, “EMERGENCYCID=”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:9] Set(“SIP/4001-0000000f”, “TRUNKOUTCID=<4078925144>”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:10] GotoIf(“SIP/4001-0000000f”, “1?trunkcid”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Goto (macro-outbound-callerid,s,15)
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/4001-0000000f”, “1?Set(CALLERID(all)=<4078925144>)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:16] ExecIf(“SIP/4001-0000000f”, “0?Set(CALLERID(all)=)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:17] ExecIf(“SIP/4001-0000000f”, “1?Set(CALLERID(all)=<4078925144>)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:18] ExecIf(“SIP/4001-0000000f”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:19] ExecIf(“SIP/4001-0000000f”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:20] Set(“SIP/4001-0000000f”, “CDR(outbound_cnum)=4078925144”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-outbound-callerid:21] Set(“SIP/4001-0000000f”, “CDR(outbound_cnam)=”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/4001-0000000f”, “0?sub-flp-1,s,1()”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/4001-0000000f”, “OUTNUM=4079338000”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/4001-0000000f”, “custom=DAHDI/g0,24”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/4001-0000000f”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/4001-0000000f”, “0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/4001-0000000f”, “dialout-trunk-predial-hook,”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/4001-0000000f”, “”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/4001-0000000f”, “0?bypass,1”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/4001-0000000f”, “1?Set(CONNECTEDLINE(num,i)=4079338000)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/4001-0000000f”, “1?Set(CONNECTEDLINE(name,i)=CID:4078925144)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:21] ExecIf(“SIP/4001-0000000f”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)4078925144)”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:22] GotoIf(“SIP/4001-0000000f”, “0?customtrunk”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] pbx.c: – Executing [s@macro-dialout-trunk:23] Dial(“SIP/4001-0000000f”, “DAHDI/g0,24/4079338000,300,T”) in new stack
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] sig_pri.c: – Requested transfer capability: 0x00 - SPEECH
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] app_dial.c: – Called DAHDI/g0
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] app_dial.c: – DAHDI/i1/-f is proceeding passing it to SIP/4001-0000000 f
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] app_dial.c: – DAHDI/i1/-f is ringing
[2017-06-04 12:25:15] VERBOSE[7861][C-0000000f] app_dial.c: – DAHDI/i1/-f is making progress passing it to SIP/4001-0000000f
[2017-06-04 12:25:18] VERBOSE[7861][C-0000000f] chan_dahdi.c: – Hungup ‘DAHDI/i1/-f’
[2017-06-04 12:25:18] VERBOSE[7861][C-0000000f] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 23) exited non-zero on ‘SIP/4001-0000000f’ in macro ‘dialout-trunk’
[2017-06-04 12:25:18] VERBOSE[7861][C-0000000f] pbx.c: == Spawn extension (restrictedroute-c4ca4238a0b923820dcc509a6f75849b, 4079338000, 7) exited non-zero on ‘SIP/4001-0000000f’
[2017-06-04 12:25:18] VERBOSE[7861][C-0000000f] pbx.c: – Executing [h@restrictedroute-c4ca4238a0b923820dcc509a6f75849b:1] Hangup(“SIP/4001-0000000f”, “”) in new stack
[2017-06-04 12:25:18] VERBOSE[7861][C-0000000f] pbx.c: == Spawn extension (restrictedroute-c4ca4238a0b923820dcc509a6f75849b, h, 1) exited non-zero on ‘SIP/4001-0000000f’

Problem solved. My provider didn’t like me having CID listed in trunk. Removed, fixed, dun!