I just set up my inbound route and I keep getting call after call the caller ID shows ext not even on my ext range. below is a snippet of a call I just received.
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [89011441873877602@from-sip-external:1] NoOp(“SIP/71.223.91.149-000001c4”, “Received incoming SIP connection from unknown peer to 89011441873877602”) in new stack
– Executing [89011441873877602@from-sip-external:2] Set(“SIP/71.223.91.149-000001c4”, “DID=89011441873877602”) in new stack
– Executing [89011441873877602@from-sip-external:3] Goto(“SIP/71.223.91.149-000001c4”, “s,1”) in new stack
– Goto (from-sip-external,s,1)
– Executing [s@from-sip-external:1] GotoIf(“SIP/71.223.91.149-000001c4”, “1?setlanguage:checkanon”) in new stack
– Goto (from-sip-external,s,2)
– Executing [s@from-sip-external:2] Set(“SIP/71.223.91.149-000001c4”, “CHANNEL(language)=en”) in new stack
– Executing [s@from-sip-external:3] GotoIf(“SIP/71.223.91.149-000001c4”, “0?noanonymous”) in new stack
– Executing [s@from-sip-external:4] Goto(“SIP/71.223.91.149-000001c4”, “from-trunk,89011441873877602,1”) in new stack
– Goto (from-trunk,89011441873877602,1)
– Executing [89011441873877602@from-trunk:1] NoOp(“SIP/71.223.91.149-000001c4”, “Catch-All DID Match - Found 89011441873877602 - You probably want a DID for this.”) in new stack
– Executing [89011441873877602@from-trunk:2] Log(“SIP/71.223.91.149-000001c4”, “WARNING,Friendly Scanner from 64.91.235.188”) in new stack
[2017-10-09 09:00:20] WARNING[108312][C-000000e8]: Ext. 89011441873877602:2 @ from-trunk: Friendly Scanner from 64.91.235.188
– Executing [89011441873877602@from-trunk:3] Set(“SIP/71.223.91.149-000001c4”, “__FROM_DID=89011441873877602”) in new stack
– Executing [89011441873877602@from-trunk:4] Goto(“SIP/71.223.91.149-000001c4”, “ext-did,s,1”) in new stack
– Goto (ext-did,s,1)
– Executing [s@ext-did:1] Set(“SIP/71.223.91.149-000001c4”, “__DIRECTION=INBOUND”) in new stack
– Executing [s@ext-did:2] Gosub(“SIP/71.223.91.149-000001c4”, “sub-record-check,s,1(in,s,dontcare)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/71.223.91.149-000001c4”, “0?initialized”) in new stack
– Executing [s@sub-record-check:2] Set(“SIP/71.223.91.149-000001c4”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:3] Set(“SIP/71.223.91.149-000001c4”, “NOW=1507564820”) in new stack
– Executing [s@sub-record-check:4] Set(“SIP/71.223.91.149-000001c4”, “__DAY=09”) in new stack
– Executing [s@sub-record-check:5] Set(“SIP/71.223.91.149-000001c4”, “__MONTH=10”) in new stack
– Executing [s@sub-record-check:6] Set(“SIP/71.223.91.149-000001c4”, “__YEAR=2017”) in new stack
– Executing [s@sub-record-check:7] Set(“SIP/71.223.91.149-000001c4”, “__TIMESTR=20171009-090020”) in new stack
– Executing [s@sub-record-check:8] Set(“SIP/71.223.91.149-000001c4”, “__FROMEXTEN=unknown”) in new stack
– Executing [s@sub-record-check:9] Set(“SIP/71.223.91.149-000001c4”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:10] NoOp(“SIP/71.223.91.149-000001c4”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/71.223.91.149-000001c4”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“SIP/71.223.91.149-000001c4”, “2?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“SIP/71.223.91.149-000001c4”, “1?sub-record-check,in,1”) in new stack
– Goto (sub-record-check,in,1)
– Executing [in@sub-record-check:1] NoOp(“SIP/71.223.91.149-000001c4”, “Inbound Recording Check to s”) in new stack
– Executing [in@sub-record-check:2] Set(“SIP/71.223.91.149-000001c4”, “FROMEXTEN=unknown”) in new stack
– Executing [in@sub-record-check:3] ExecIf(“SIP/71.223.91.149-000001c4”, “5?Set(FROMEXTEN=10001)”) in new stack
– Executing [in@sub-record-check:4] Gosub(“SIP/71.223.91.149-000001c4”, “recordcheck,1(dontcare,in,s)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“SIP/71.223.91.149-000001c4”, “Starting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“SIP/71.223.91.149-000001c4”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [in@sub-record-check:5] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@ext-did:3] Gosub(“SIP/71.223.91.149-000001c4”, “app-blacklist-check,s,1()”) in new stack
– Executing [s@app-blacklist-check:1] GotoIf(“SIP/71.223.91.149-000001c4”, “0?blacklisted”) in new stack
– Executing [s@app-blacklist-check:2] Set(“SIP/71.223.91.149-000001c4”, “CALLED_BLACKLIST=1”) in new stack
– Executing [s@app-blacklist-check:3] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@ext-did:4] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(__FROM_DID=s)”) in new stack
– Executing [s@ext-did:5] Set(“SIP/71.223.91.149-000001c4”, “CDR(did)=89011441873877602”) in new stack
– Executing [s@ext-did:6] ExecIf(“SIP/71.223.91.149-000001c4”, “0 ?Set(CALLERID(name)=10001)”) in new stack
– Executing [s@ext-did:7] Set(“SIP/71.223.91.149-000001c4”, “__MOHCLASS=”) in new stack
– Executing [s@ext-did:8] Set(“SIP/71.223.91.149-000001c4”, “__REVERSAL_REJECT=FALSE”) in new stack
– Executing [s@ext-did:9] GotoIf(“SIP/71.223.91.149-000001c4”, “1?post-reverse-charge”) in new stack
– Goto (ext-did,s,11)
– Executing [s@ext-did:11] NoOp(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@ext-did:12] Set(“SIP/71.223.91.149-000001c4”, “__CALLINGNAMEPRES_SV=allowed_not_screened”) in new stack
– Executing [s@ext-did:13] Set(“SIP/71.223.91.149-000001c4”, “__CALLINGNUMPRES_SV=allowed_not_screened”) in new stack
– Executing [s@ext-did:14] Set(“SIP/71.223.91.149-000001c4”, “CALLERID(name-pres)=allowed_not_screened”) in new stack
– Executing [s@ext-did:15] Set(“SIP/71.223.91.149-000001c4”, “CALLERID(num-pres)=allowed_not_screened”) in new stack
– Executing [s@ext-did:16] NoOp(“SIP/71.223.91.149-000001c4”, “CallerID Entry Point”) in new stack
– Executing [s@ext-did:17] Set(“SIP/71.223.91.149-000001c4”, “__CRM_DIRECTION=INBOUND”) in new stack
– Executing [s@ext-did:18] Set(“SIP/71.223.91.149-000001c4”, “__CRM_SOURCE=10001”) in new stack
– Executing [s@ext-did:19] Set(“SIP/71.223.91.149-000001c4”, “__CRM_LINKEDID=1507564820.452”) in new stack
– Executing [s@ext-did:20] ExecIf(“SIP/71.223.91.149-000001c4”, “1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
– Executing [s@ext-did:21] Goto(“SIP/71.223.91.149-000001c4”, “from-did-direct,6000,1”) in new stack
– Goto (from-did-direct,6000,1)
– Executing [6000@from-did-direct:1] GotoIf(“SIP/71.223.91.149-000001c4”, “1?ext-local,6000,1:followme-check,6000,1”) in new stack
– Goto (ext-local,6000,1)
– Executing [6000@ext-local:1] Set(“SIP/71.223.91.149-000001c4”, “__RINGTIMER=15”) in new stack
– Executing [6000@ext-local:2] Macro(“SIP/71.223.91.149-000001c4”, “exten-vm,6000,6000,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/71.223.91.149-000001c4”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/71.223.91.149-000001c4”, “TOUCH_MONITOR=1507564820.452”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/71.223.91.149-000001c4”, “AMPUSER=10001”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/71.223.91.149-000001c4”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/71.223.91.149-000001c4”, “1?Set(REALCALLERIDNUM=10001)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/71.223.91.149-000001c4”, “AMPUSER=”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/71.223.91.149-000001c4”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/71.223.91.149-000001c4”, “AMPUSERCIDNAME=”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/71.223.91.149-000001c4”, “1?report”) in new stack
– Goto (macro-user-callerid,s,15)
– Executing [s@macro-user-callerid:15] GotoIf(“SIP/71.223.91.149-000001c4”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:16] ExecIf(“SIP/71.223.91.149-000001c4”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
– Executing [s@macro-user-callerid:17] Set(“SIP/71.223.91.149-000001c4”, “__TTL=6”) in new stack
– Executing [s@macro-user-callerid:18] GotoIf(“SIP/71.223.91.149-000001c4”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,29)
– Executing [s@macro-user-callerid:29] Set(“SIP/71.223.91.149-000001c4”, “CALLERID(number)=10001”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/71.223.91.149-000001c4”, “CALLERID(name)=10001”) in new stack
– Executing [s@macro-user-callerid:31] GotoIf(“SIP/71.223.91.149-000001c4”, “0?cnum”) in new stack
– Executing [s@macro-user-callerid:32] Set(“SIP/71.223.91.149-000001c4”, “CDR(cnam)=10001”) in new stack
– Executing [s@macro-user-callerid:33] Set(“SIP/71.223.91.149-000001c4”, “CDR(cnum)=10001”) in new stack
– Executing [s@macro-user-callerid:34] Set(“SIP/71.223.91.149-000001c4”, “CHANNEL(language)=en”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/71.223.91.149-000001c4”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/71.223.91.149-000001c4”, “__EXTTOCALL=6000”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/71.223.91.149-000001c4”, “__PICKUPMARK=6000”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/71.223.91.149-000001c4”, “RT=15”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4425 ast_func_read: Function PJSIP_HEADER not registered
– Executing [s@macro-exten-vm:6] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Macro(vm,6000,DIRECTDIAL,)”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4464 ast_func_read2: Function PJSIP_HEADER not registered
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4425 ast_func_read: Function PJSIP_HEADER not registered
– Executing [s@macro-exten-vm:7] ExecIf(“SIP/71.223.91.149-000001c4”, “0?MacroExit()”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4464 ast_func_read2: Function PJSIP_HEADER not registered
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4425 ast_func_read: Function PJSIP_HEADER not registered
– Executing [s@macro-exten-vm:8] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Gosub(ext-intercom,*806000,1())”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4464 ast_func_read2: Function PJSIP_HEADER not registered
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4425 ast_func_read: Function PJSIP_HEADER not registered
– Executing [s@macro-exten-vm:9] ExecIf(“SIP/71.223.91.149-000001c4”, “0?MacroExit()”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4464 ast_func_read2: Function PJSIP_HEADER not registered
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4425 ast_func_read: Function PJSIP_HEADER not registered
[2017-10-09 09:00:20] WARNING[108312][C-000000e8]: pbx.c:4277 func_args: Can’t find trailing parenthesis for function ‘DB(DEVICE/6000/dial’?
– Executing [s@macro-exten-vm:10] ExecIf(“SIP/71.223.91.149-000001c4”, “0?ChanSpy(SIP/6000,q)”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4464 ast_func_read2: Function PJSIP_HEADER not registered
[2017-10-09 09:00:20] WARNING[108312][C-000000e8]: pbx.c:4277 func_args: Can’t find trailing parenthesis for function ‘DB(DEVICE/6000/dial’?
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4425 ast_func_read: Function PJSIP_HEADER not registered
– Executing [s@macro-exten-vm:11] ExecIf(“SIP/71.223.91.149-000001c4”, “0?MacroExit()”) in new stack
[2017-10-09 09:00:20] ERROR[108312][C-000000e8]: pbx.c:4464 ast_func_read2: Function PJSIP_HEADER not registered
– Executing [s@macro-exten-vm:12] Gosub(“SIP/71.223.91.149-000001c4”, “sub-record-check,s,1(exten,6000,dontcare)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/71.223.91.149-000001c4”, “5?initialized”) in new stack
– Goto (sub-record-check,s,10)
– Executing [s@sub-record-check:10] NoOp(“SIP/71.223.91.149-000001c4”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/71.223.91.149-000001c4”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“SIP/71.223.91.149-000001c4”, “5?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“SIP/71.223.91.149-000001c4”, “1?sub-record-check,exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] NoOp(“SIP/71.223.91.149-000001c4”, “Exten Recording Check between 10001 and 6000”) in new stack
– Executing [exten@sub-record-check:2] Set(“SIP/71.223.91.149-000001c4”, “CALLTYPE=external”) in new stack
– Executing [exten@sub-record-check:3] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(CALLTYPE=)”) in new stack
– Executing [exten@sub-record-check:4] Set(“SIP/71.223.91.149-000001c4”, “CALLEE=dontcare”) in new stack
– Executing [exten@sub-record-check:5] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(CALLEE=dontcare)”) in new stack
– Executing [exten@sub-record-check:6] GotoIf(“SIP/71.223.91.149-000001c4”, “1?callee”) in new stack
– Goto (sub-record-check,exten,11)
– Executing [exten@sub-record-check:11] Gosub(“SIP/71.223.91.149-000001c4”, “recordcheck,1(dontcare,external,6000)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“SIP/71.223.91.149-000001c4”, “Starting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“SIP/71.223.91.149-000001c4”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [exten@sub-record-check:12] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@macro-exten-vm:13] GotoIf(“SIP/71.223.91.149-000001c4”, “1?macrodial”) in new stack
– Goto (macro-exten-vm,s,19)
– Executing [s@macro-exten-vm:19] GosubIf(“SIP/71.223.91.149-000001c4”, “0?clrheader,1()”) in new stack
– Executing [s@macro-exten-vm:20] Macro(“SIP/71.223.91.149-000001c4”, “dial-one,15,Ttr,6000”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/71.223.91.149-000001c4”, “DEXTEN=6000”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/71.223.91.149-000001c4”, “__CRM_SOURCE=10001”) in new stack
– Executing [s@macro-dial-one:3] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(EXTTOCALL=6000)”) in new stack
– Executing [s@macro-dial-one:4] Set(“SIP/71.223.91.149-000001c4”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:5] GosubIf(“SIP/71.223.91.149-000001c4”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:6] GosubIf(“SIP/71.223.91.149-000001c4”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:7] GotoIf(“SIP/71.223.91.149-000001c4”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,10)
– Executing [s@macro-dial-one:10] GotoIf(“SIP/71.223.91.149-000001c4”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/71.223.91.149-000001c4”, “0?continue”) in new stack
– Executing [s@macro-dial-one:12] Set(“SIP/71.223.91.149-000001c4”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:13] GotoIf(“SIP/71.223.91.149-000001c4”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,25)
– Executing [s@macro-dial-one:25] GotoIf(“SIP/71.223.91.149-000001c4”, “0?next3:continue”) in new stack
– Goto (macro-dial-one,s,27)
– Executing [s@macro-dial-one:27] GotoIf(“SIP/71.223.91.149-000001c4”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GosubIf(“SIP/71.223.91.149-000001c4”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“SIP/71.223.91.149-000001c4”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“SIP/71.223.91.149-000001c4”, “DEVICES=6000”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(DEVICES=000)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“SIP/71.223.91.149-000001c4”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“SIP/71.223.91.149-000001c4”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“SIP/71.223.91.149-000001c4”, “THISDIAL=SIP/6000”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“SIP/71.223.91.149-000001c4”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/71.223.91.149-000001c4”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/71.223.91.149-000001c4”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/71.223.91.149-000001c4”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/71.223.91.149-000001c4”, “THISPART2=SIP/6000”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(THISPART2=DAHDI/6000)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/71.223.91.149-000001c4”, “NEWDIAL=SIP/6000&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/71.223.91.149-000001c4”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/71.223.91.149-000001c4”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/71.223.91.149-000001c4”, “THISDIAL=SIP/6000”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [dstring@macro-dial-one:9] GotoIf(“SIP/71.223.91.149-000001c4”, “1?docheck”) in new stack
– Goto (macro-dial-one,dstring,14)
– Executing [dstring@macro-dial-one:14] GotoIf(“SIP/71.223.91.149-000001c4”, “0?skipset”) in new stack
– Executing [dstring@macro-dial-one:15] Set(“SIP/71.223.91.149-000001c4”, “DSTRING=SIP/6000&”) in new stack
– Executing [dstring@macro-dial-one:16] Set(“SIP/71.223.91.149-000001c4”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:17] GotoIf(“SIP/71.223.91.149-000001c4”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:18] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:19] Set(“SIP/71.223.91.149-000001c4”, “DSTRING=SIP/6000”) in new stack
– Executing [dstring@macro-dial-one:20] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@macro-dial-one:29] GotoIf(“SIP/71.223.91.149-000001c4”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:30] GotoIf(“SIP/71.223.91.149-000001c4”, “0?skiptrace”) in new stack
– Executing [s@macro-dial-one:31] GosubIf(“SIP/71.223.91.149-000001c4”, “1?ctset,1():ctclear,1()”) in new stack
– Executing [ctset@macro-dial-one:1] Set(“SIP/71.223.91.149-000001c4”, “DB(CALLTRACE/6000)=10001”) in new stack
– Executing [ctset@macro-dial-one:2] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@macro-dial-one:32] Set(“SIP/71.223.91.149-000001c4”, “D_OPTIONS=Ttr”) in new stack
– Executing [s@macro-dial-one:33] NoOp(“SIP/71.223.91.149-000001c4”, "Blind Transfer: , Attended Transfer: , User: , Alert Info: ") in new stack
– Executing [s@macro-dial-one:34] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [s@macro-dial-one:35] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [s@macro-dial-one:36] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ALERT_INFO=)”) in new stack
– Executing [s@macro-dial-one:37] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
– Executing [s@macro-dial-one:38] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
– Executing [s@macro-dial-one:39] GosubIf(“SIP/71.223.91.149-000001c4”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
– Executing [s@macro-dial-one:40] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:41] GosubIf(“SIP/71.223.91.149-000001c4”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:42] Set(“SIP/71.223.91.149-000001c4”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:43] Set(“SIP/71.223.91.149-000001c4”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:44] GotoIf(“SIP/71.223.91.149-000001c4”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:45] GotoIf(“SIP/71.223.91.149-000001c4”, “1?godial”) in new stack
– Goto (macro-dial-one,s,50)
– Executing [s@macro-dial-one:50] Macro(“SIP/71.223.91.149-000001c4”, “dialout-one-predial-hook,”) in new stack
– Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@macro-dial-one:51] ExecIf(“SIP/71.223.91.149-000001c4”, “1?Set(D_OPTIONS=trI)”) in new stack
– Executing [s@macro-dial-one:52] NoOp(“SIP/71.223.91.149-000001c4”, “”) in new stack
– Executing [s@macro-dial-one:53] Dial(“SIP/71.223.91.149-000001c4”, “SIP/6000,15,trIb(func-apply-sipheaders^s^1)”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– SIP/6000-000001c5 Internal Gosub(func-apply-sipheaders,s,1) start
– Executing [s@func-apply-sipheaders:1] ExecIf(“SIP/6000-000001c5”, “1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
– Executing [s@func-apply-sipheaders:2] NoOp(“SIP/6000-000001c5”, “Applying SIP Headers to channel”) in new stack
– Executing [s@func-apply-sipheaders:3] Set(“SIP/6000-000001c5”, “SIPHEADERKEYS=”) in new stack
– Executing [s@func-apply-sipheaders:4] While(“SIP/6000-000001c5”, “0”) in new stack
– Jumping to priority 7
– Executing [s@func-apply-sipheaders:8] Return(“SIP/6000-000001c5”, “”) in new stack
== Spawn extension (from-internal, 6000, 1) exited non-zero on ‘SIP/6000-000001c5’
– SIP/6000-000001c5 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
– Called SIP/6000
– Connected line update to SIP/71.223.91.149-000001c4 prevented.
– SIP/6000-000001c5 is ringing
– Connected line update to SIP/71.223.91.149-000001c4 prevented.
– SIP/6000-000001c5 answered SIP/71.223.91.149-000001c4
> 0x7f18fc3c0d70 – Probation passed - setting RTP source address to 192.168.0.117:61858
[2017-10-09 09:01:05] NOTICE[2166]: chan_sip.c:29270 check_rtp_timeout: Disconnecting call ‘SIP/71.223.91.149-000001c4’ for lack of RTP activity in 31 seconds
– Executing [h@macro-dial-one:1] Macro(“SIP/71.223.91.149-000001c4”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(CDR(recordingfile)=.wav)”) in new stack
– Executing [s@macro-hangupcall:2] GotoIf(“SIP/71.223.91.149-000001c4”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:5] Hangup(“SIP/71.223.91.149-000001c4”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 5) exited non-zero on ‘SIP/71.223.91.149-000001c4’ in macro ‘hangupcall’
== Spawn extension (macro-dial-one, h, 1) exited non-zero on ‘SIP/71.223.91.149-000001c4’
– SIP/71.223.91.149-000001c4 Internal Gosub(crm-hangup,s,1) start
– Executing [s@crm-hangup:1] NoOp(“SIP/71.223.91.149-000001c4”, “Sending Hangup to CRM”) in new stack
– Executing [s@crm-hangup:2] NoOp(“SIP/71.223.91.149-000001c4”, “HANGUP CAUSE: 44”) in new stack
– Executing [s@crm-hangup:3] ExecIf(“SIP/71.223.91.149-000001c4”, “0?Set(__CRM_VOICEMAIL=)”) in new stack
– Executing [s@crm-hangup:4] NoOp(“SIP/71.223.91.149-000001c4”, “MASTER CHANNEL: 1507564820.452 = 1507564820.452”) in new stack
– Executing [s@crm-hangup:5] GotoIf(“SIP/71.223.91.149-000001c4”, “0?return”) in new stack
– Executing [s@crm-hangup:6] Set(“SIP/71.223.91.149-000001c4”, “__CRM_HANGUP=1”) in new stack
– Executing [s@crm-hangup:7] AGI(“SIP/71.223.91.149-000001c4”, “sangomacrm.agi”) in new stack
– Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
– <SIP/71.223.91.149-000001c4>AGI Script sangomacrm.agi completed, returning 0
– Executing [s@crm-hangup:8] Return(“SIP/71.223.91.149-000001c4”, “”) in new stack
== Spawn extension (macro-dial-one, h, 1) exited non-zero on ‘SIP/71.223.91.149-000001c4’
– SIP/71.223.91.149-000001c4 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
– SIP/6000-000001c5 Internal Gosub(crm-hangup,s,1) start
– Executing [s@crm-hangup:1] NoOp(“SIP/6000-000001c5”, “Sending Hangup to CRM”) in new stack
– Executing [s@crm-hangup:2] NoOp(“SIP/6000-000001c5”, “HANGUP CAUSE: 16”) in new stack
– Executing [s@crm-hangup:3] ExecIf(“SIP/6000-000001c5”, “0?Set(__CRM_VOICEMAIL=)”) in new stack
– Executing [s@crm-hangup:4] NoOp(“SIP/6000-000001c5”, “MASTER CHANNEL: 1507564820.453 = 1507564820.452”) in new stack
– Executing [s@crm-hangup:5] GotoIf(“SIP/6000-000001c5”, “1?return”) in new stack
– Goto (crm-hangup,s,8)
– Executing [s@crm-hangup:8] Return(“SIP/6000-000001c5”, “”) in new stack
== Spawn extension (macro-dial-one, , 1) exited non-zero on ‘SIP/6000-000001c5’
– SIP/6000-000001c5 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
== Spawn extension (macro-dial-one, s, 53) exited non-zero on ‘SIP/71.223.91.149-000001c4’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 20) exited non-zero on ‘SIP/71.223.91.149-000001c4’ in macro ‘exten-vm’
== Spawn extension (ext-local, 6000, 2) exited non-zero on ‘SIP/71.223.91.149-000001c4’
[2017-10-09 09:01:06] WARNING[2166]: chan_sip.c:4038 retrans_pkt: Retransmission timeout reached on transmission 53b9a48cb7ff12b394a20ba758912167 for seqno 1 (Critical Response) – See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 32001ms with no response