Dear All,
I’m installing trixbox-2.2 with ATCOM ( AX-1E ) card after default installation & update system
cat /etc/zaptel.conf
Global data
loadzone = uk
defaultzone = uk
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
cat /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
signalling=pri_cpe
switchtype=euroisdn
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
channel => 1-15
channel => 17-31
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
after this change
run
genzaptelconf
than
[root@asterisk1 etc]# ztcfg -vv
Zaptel Configuration
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
31 channels configured.
ZT_SPANCONFIG failed on span 1: No such device or address (6)
[root@asterisk1 etc]# service zaptel start
Loading zaptel framework: [ OK ]
Waiting for zap to come online: [ OK ]
Loading zaptel hardware modules:
Loading wct1xxp: [ OK ]
Loading wctdm: [ OK ]
No functioning zap hardware found in /proc/zaptel, loading ztdummypll
Loading ztdummypll: FATAL: Module ztdummypll not found.
[FAILED]
Running ztcfg: ZT_SPANCONFIG failed on span 1: No such device or address (6)
[FAILED]
also
/proc/zaptel (file empty)
in web administration service status
Asterisk unknown
***also tried with TE100P Digium PRI/E1 card and found same problem!
plz tell me how can we solve this issue
regards:
beacon