Module updates not working anymore

Hello,

I recently installed FreePBX using the latest ISO and then did all available updated to both system and modules.
It’s now running FPBX ver 14.0.4.5, system ver 12.7.5-1807-1.sng7 and Asterisk ver 14.7.5.

The system has been configured and everything works except that now when I try to check for module updates (by clicking Check Online), it fails with the following message:

Warning: Cannot connect to online repository(s) (http://mirror1.freepbx.org,http://mirror2.freepbx.org). Online modules are not available.

I thought it might be DNS issue but DNS is working perfectly! Where else can I look to figure this out?

Thanks in advance!

As I write this, mirror2 appears to be down but mirror1 is working fine.

Can you ping mirror1.freepbx.org from the command line? If so, can you fetch http://mirror1.freepbx.org with wget or curl?

Yes pinging works:

ping mirror1.freepbx.org
PING mirror1.freepbx.org (199.102.239.170) 56(84) bytes of data.
64 bytes from 199.102.239.170 (199.102.239.170): icmp_seq=1 ttl=52 time=103 ms
64 bytes from 199.102.239.170 (199.102.239.170): icmp_seq=2 ttl=52 time=20.6 ms
64 bytes from 199.102.239.170 (199.102.239.170): icmp_seq=3 ttl=52 time=24.1 ms
64 bytes from 199.102.239.170 (199.102.239.170): icmp_seq=4 ttl=52 time=17.5 ms

but wget seems to be getting stuck!

wget http://mirror1.freepbx.org
–2018-11-06 19:32:40-- http://mirror1.freepbx.org/
Resolving mirror1.freepbx.org (mirror1.freepbx.org)… 199.102.239.170
Connecting to mirror1.freepbx.org (mirror1.freepbx.org)|199.102.239.170|:80… failed: Connection timed out.
Retrying.

–2018-11-06 19:34:48-- (try: 2) http://mirror1.freepbx.org/
Connecting to mirror1.freepbx.org (mirror1.freepbx.org)|199.102.239.170|:80…

What could be causing this? Where do I need to look?

FYI mirror2 is no longer functioning. We took it down last year.

does wget https://mirror.freepbx.org work for you?

Yes it seems to be working now.

Thanks for your help!

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.