Migrating from Trixbox - Patton Trunks UNREACHABLE

Dear Sirs,
I’m triyng to migrate an existing and running Trixbox to a Freepbx Distro, everything is “hand made” just a clean install.

I’ve got a Patton 4118 that was working with trixbox, but under the new system appear UNREACHABLE.

I’ve tried running both systems at same time and this way from both the Patton trunks appears OK and you can outcall from both.

No incoming calls appear to be possible on the freepbx.

/ETC/ASTERISK/SIP_ADDITIONAL.coNF
This is the configuration of the trunks on the trixbox:
[1004]
username=1004
type=friend
secret=1004
qualify=yes
port=5060
host=1.1.1.1
dtmfmode=auto
defaultip=1.1.1.1
context=from-trunk
callerid=asreceived

[1005]
username=1005
type=friend
secret=1005
qualify=yes
nat=no
port=5060
insecure=port,invite
host=1.1.1.1
defaultip=1.1.1.1
dtmfmode=auto
context=from-trunk
callerid=asreceived

This is the configuration of the trunks on the freepbx:
[1004]
username=1004
type=friend
secret=1004
qualify=yes
port=5060
host=1.1.1.1
dtmfmode=auto
context=from-trunk
callerid=asreceived

[1005]
username=1005
type=friend
secret=1005
qualify=yes
nat=no
port=5060
insecure=port,invite
host=1.1.1.1
defaultip=1.1.1.1
dtmfmode=auto
context=from-trunk
callerid=asreceived

Sip peers

004/1004 1.1.1.1 Yes Yes 5062 UNREACHABLE
1005/1005 1.1.1.1 No No 5060 UNREACHABLE

Summer, did you ever figure this out?
if so please let me know, I’m trying to get a 4118 working with my freepbx 11 system