Meetme conference ends after appx. 15 minutes

General Help
1

Using Freepbx mainly for conference service, haven’t used lately, and went to use again, and after appx. 15 minutes the call abruptly ends with no user interaction. Number of participants doesn’t matter. Have tried using a different conf#, tried creating new room. Have updated and installed all current updates and patches.
Asterisk verison appears to be 11.4.0 according to freepbx gui.
PBX Firmware: 3.211.63-2
PBX Service Pack: 1.0.0.0
All modules are current version
Conferences 2.11.0.4 Schmooze Com Inc Enabled and up to date

Please forgive my ignorance, I am still trying to learn all this.
a partial exert from the log file.

Call orginated at 22:14:07

[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] res_musiconhold.c: – Stopped music on hold on SIP/126-00000044
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] res_musiconhold.c: – Stopped music on hold on SIP/126-00000044
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] chan_dahdi.c: – Hungup ‘DAHDI/pseudo-1461628661’
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] chan_dahdi.c: – Hungup ‘DAHDI/pseudo-1461628661’
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] pbx.c: == Spawn extension (from-internal, STARTMEETME, 4) exited non-zero on ‘SIP/126-00000044’
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] pbx.c: == Spawn extension (from-internal, STARTMEETME, 4) exited non-zero on ‘SIP/126-00000044’
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/126-00000044”, “”) in new stack
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/126-00000044”, “”) in new stack
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/126-00000044’
[2014-05-15 22:31:35] VERBOSE[3964][C-00000064] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/126-00000044’

2

Not necessarily, this one is for general help, your duplicate logging problem does though.

So which conference app are you using?

3

Not 100% sure.
does this mean anything?
app_meetme.c:
from that I would assume meetme.
Have another call going right now. should only be another couples minutes before it dies.

4

[2014-05-16 08:06:19] VERBOSE[2839][C-00000065] netsock2.c: == Using SIP RTP TOS bits 184
[2014-05-16 08:06:19] VERBOSE[2839][C-00000065] netsock2.c: == Using SIP RTP TOS bits 184
[2014-05-16 08:06:19] VERBOSE[2839][C-00000065] netsock2.c: == Using SIP RTP CoS mark 5
[2014-05-16 08:06:19] VERBOSE[2839][C-00000065] netsock2.c: == Using SIP RTP CoS mark 5
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:1] Macro(“SIP/6126-00000045”, “user-callerid,”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:1] Macro(“SIP/6126-00000045”, “user-callerid,”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/6126-00000045”, “TOUCH_MONITOR=1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/6126-00000045”, “TOUCH_MONITOR=1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/6126-00000045”, “AMPUSER=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/6126-00000045”, “AMPUSER=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/6126-00000045”, “0?report”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/6126-00000045”, “0?report”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/6126-00000045”, “1?Set(REALCALLERIDNUM=6126)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/6126-00000045”, “1?Set(REALCALLERIDNUM=6126)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/6126-00000045”, “AMPUSER=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/6126-00000045”, “AMPUSER=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/6126-00000045”, “0?limit”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/6126-00000045”, “0?limit”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/6126-00000045”, “AMPUSERCIDNAME=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/6126-00000045”, “AMPUSERCIDNAME=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/6126-00000045”, “0?report”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/6126-00000045”, “0?report”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/6126-00000045”, “AMPUSERCID=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/6126-00000045”, “AMPUSERCID=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/6126-00000045”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/6126-00000045”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/6126-00000045”, “CALLERID(all)=“6126” <6126>”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/6126-00000045”, “CALLERID(all)=“6126” <6126>”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/6126-00000045”, “0?limit”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/6126-00000045”, “0?limit”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/6126-00000045”, “0?Set(GROUP(concurrency_limit)=6126)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/6126-00000045”, “0?Set(GROUP(concurrency_limit)=6126)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/6126-00000045”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/6126-00000045”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/6126-00000045”, “7?sub-ccss,s,1(from-internal,6300)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/6126-00000045”, “7?sub-ccss,s,1(from-internal,6300)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/6126-00000045”, “0?Return()”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/6126-00000045”, “0?Return()”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/6126-00000045”, “CCSS_SETUP=TRUE”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/6126-00000045”, “CCSS_SETUP=TRUE”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/6126-00000045”, “0?monitor_config,1(from-internal,6300):monitor_default,1(from-internal,6300)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/6126-00000045”, “0?monitor_config,1(from-internal,6300):monitor_default,1(from-internal,6300)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/6126-00000045”, “0?is_exten”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/6126-00000045”, “0?is_exten”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/6126-00000045”, “FALSE”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/6126-00000045”, “FALSE”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/6126-00000045”, “0?continue”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/6126-00000045”, “0?continue”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/6126-00000045”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/6126-00000045”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/6126-00000045”, “__TTL=64”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/6126-00000045”, “__TTL=64”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/6126-00000045”, “1?continue”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/6126-00000045”, “1?continue”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (macro-user-callerid,s,30)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (macro-user-callerid,s,30)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/6126-00000045”, “CALLERID(number)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/6126-00000045”, “CALLERID(number)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/6126-00000045”, “CALLERID(name)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/6126-00000045”, “CALLERID(name)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/6126-00000045”, “CDR(cnum)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/6126-00000045”, “CDR(cnum)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/6126-00000045”, “CDR(cnam)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/6126-00000045”, “CDR(cnam)=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/6126-00000045”, “CHANNEL(language)=en”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/6126-00000045”, “CHANNEL(language)=en”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:2] Set(“SIP/6126-00000045”, “MEETME_ROOMNUM=6300”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:2] Set(“SIP/6126-00000045”, “MEETME_ROOMNUM=6300”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:3] Set(“SIP/6126-00000045”, “MAX_PARTICIPANTS=0”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:3] Set(“SIP/6126-00000045”, “MAX_PARTICIPANTS=0”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:4] Set(“SIP/6126-00000045”, “MEETME_MUSIC=”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:4] Set(“SIP/6126-00000045”, “MEETME_MUSIC=”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:5] Gosub(“SIP/6126-00000045”, “sub-record-check,s,1(conf,6300,never)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:5] Gosub(“SIP/6126-00000045”, “sub-record-check,s,1(conf,6300,never)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/6126-00000045”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/6126-00000045”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/6126-00000045”, “1?check”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/6126-00000045”, “1?check”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (sub-record-check,s,7)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (sub-record-check,s,7)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/6126-00000045”, “__MON_FMT=wav”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/6126-00000045”, “__MON_FMT=wav”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/6126-00000045”, “1?next”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/6126-00000045”, “1?next”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (sub-record-check,s,11)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (sub-record-check,s,11)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/6126-00000045”, “0?Return()”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/6126-00000045”, “0?Return()”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/6126-00000045”, “1?Set(__REC_POLICY_MODE=never)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/6126-00000045”, “1?Set(__REC_POLICY_MODE=never)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/6126-00000045”, “0?conf,1”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/6126-00000045”, “0?conf,1”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/6126-00000045”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/6126-00000045”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/6126-00000045”, “NOW=1400245579”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/6126-00000045”, “NOW=1400245579”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/6126-00000045”, “__DAY=16”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/6126-00000045”, “__DAY=16”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/6126-00000045”, “__MONTH=05”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/6126-00000045”, “__MONTH=05”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/6126-00000045”, “__YEAR=2014”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/6126-00000045”, “__YEAR=2014”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/6126-00000045”, “__TIMESTR=20140516-080619”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/6126-00000045”, “__TIMESTR=20140516-080619”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/6126-00000045”, “__FROMEXTEN=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/6126-00000045”, “__FROMEXTEN=6126”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/6126-00000045”, “__CALLFILENAME=conf-6300-6126-20140516-080619-1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/6126-00000045”, “__CALLFILENAME=conf-6300-6126-20140516-080619-1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/6126-00000045”, “conf,1”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/6126-00000045”, “conf,1”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (sub-record-check,conf,1)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Goto (sub-record-check,conf,1)
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [conf@sub-record-check:1] Gosub(“SIP/6126-00000045”, “recconf,1(conf,6300,6300)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [conf@sub-record-check:1] Gosub(“SIP/6126-00000045”, “recconf,1(conf,6300,6300)”) in new stack
[2014-05-16 08:06:19] NOTICE[5181][C-00000065] app_meetme.c: Error: conference (6300) not found
[2014-05-16 08:06:19] NOTICE[5181][C-00000065] app_meetme.c: Error: conference (6300) not found
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:1] Set(“SIP/6126-00000045”, “__CALLFILENAME=conf-6300-6300-20140516-080619-1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:1] Set(“SIP/6126-00000045”, “__CALLFILENAME=conf-6300-6300-20140516-080619-1400245579.261”) in new stack
[2014-05-16 08:06:19] NOTICE[5181][C-00000065] app_meetme.c: Error: conference (6300) not found
[2014-05-16 08:06:19] NOTICE[5181][C-00000065] app_meetme.c: Error: conference (6300) not found
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:2] ExecIf(“SIP/6126-00000045”, “1?Set(DB(RECCONF/6300)=conf-6300-6300-20140516-080619-1400245579.261)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:2] ExecIf(“SIP/6126-00000045”, “1?Set(DB(RECCONF/6300)=conf-6300-6300-20140516-080619-1400245579.261)”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:3] Set(“SIP/6126-00000045”, “MEETME_RECORDINGFILE=/var/spool/asterisk/monitor/2014/05/16/conf-6300-6300-20140516-080619-1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:3] Set(“SIP/6126-00000045”, “MEETME_RECORDINGFILE=/var/spool/asterisk/monitor/2014/05/16/conf-6300-6300-20140516-080619-1400245579.261”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:4] Set(“SIP/6126-00000045”, “MEETME_RECORDINGFORMAT=wav”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:4] Set(“SIP/6126-00000045”, “MEETME_RECORDINGFORMAT=wav”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:5] ExecIf(“SIP/6126-00000045”, “1?Return()”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [recconf@sub-record-check:5] ExecIf(“SIP/6126-00000045”, “1?Return()”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [conf@sub-record-check:2] Return(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [conf@sub-record-check:2] Return(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:6] GotoIf(“SIP/6126-00000045”, “0?USER”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:6] GotoIf(“SIP/6126-00000045”, “0?USER”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:7] Answer(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:7] Answer(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:8] Wait(“SIP/6126-00000045”, “1”) in new stack
[2014-05-16 08:06:19] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:8] Wait(“SIP/6126-00000045”, “1”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:9] Set(“SIP/6126-00000045”, “MEETME_OPTS=oTM”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:9] Set(“SIP/6126-00000045”, “MEETME_OPTS=oTM”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:10] Goto(“SIP/6126-00000045”, “STARTMEETME,1”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [6300@from-internal:10] Goto(“SIP/6126-00000045”, “STARTMEETME,1”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Goto (from-internal,STARTMEETME,1)
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Goto (from-internal,STARTMEETME,1)
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:1] ExecIf(“SIP/6126-00000045”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:1] ExecIf(“SIP/6126-00000045”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:2] Set(“SIP/6126-00000045”, “GROUP(meetme)=6300”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:2] Set(“SIP/6126-00000045”, “GROUP(meetme)=6300”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:3] GotoIf(“SIP/6126-00000045”, “0?MEETMEFULL,1”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:3] GotoIf(“SIP/6126-00000045”, “0?MEETMEFULL,1”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:4] MeetMe(“SIP/6126-00000045”, “6300,oTM,”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] pbx.c: – Executing [STARTMEETME@from-internal:4] MeetMe(“SIP/6126-00000045”, “6300,oTM,”) in new stack
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] config.c: == Parsing ‘/etc/asterisk/meetme.conf’: Found
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] config.c: == Parsing ‘/etc/asterisk/meetme.conf’: Found
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] config.c: == Parsing ‘/etc/asterisk/meetme_additional.conf’: Found
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] config.c: == Parsing ‘/etc/asterisk/meetme_additional.conf’: Found
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] app_meetme.c: – Created MeetMe conference 1023 for conference ‘6300’
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] app_meetme.c: – Created MeetMe conference 1023 for conference ‘6300’
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] file.c: – <SIP/6126-00000045> Playing ‘conf-onlyperson.ulaw’ (language ‘en’)
[2014-05-16 08:06:20] VERBOSE[5181][C-00000065] file.c: – <SIP/6126-00000045> Playing ‘conf-onlyperson.ulaw’ (language ‘en’)
[2014-05-16 08:06:23] VERBOSE[5181][C-00000065] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6126-00000045
[2014-05-16 08:06:23] VERBOSE[5181][C-00000065] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6126-00000045
[2014-05-16 08:06:23] VERBOSE[5181][C-00000065] res_musiconhold.c: – Stopped music on hold on SIP/6126-00000045
[2014-05-16 08:06:23] VERBOSE[5181][C-00000065] res_musiconhold.c: – Stopped music on hold on SIP/6126-00000045
[2014-05-16 08:06:24] VERBOSE[5181][C-00000065] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6126-00000045
[2014-05-16 08:06:24] VERBOSE[5181][C-00000065] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6126-00000045
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] res_musiconhold.c: – Stopped music on hold on SIP/6126-00000045
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] res_musiconhold.c: – Stopped music on hold on SIP/6126-00000045
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] chan_dahdi.c: – Hungup ‘DAHDI/pseudo-594245929’
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] chan_dahdi.c: – Hungup ‘DAHDI/pseudo-594245929’
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] pbx.c: == Spawn extension (from-internal, STARTMEETME, 4) exited non-zero on ‘SIP/6126-00000045’
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] pbx.c: == Spawn extension (from-internal, STARTMEETME, 4) exited non-zero on ‘SIP/6126-00000045’
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/6126-00000045”, “”) in new stack
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/6126-00000045’
[2014-05-16 08:23:47] VERBOSE[5181][C-00000065] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/6126-00000045’

5

Try selecting app_confbridge in your advanced settings.

6

switched to app_confbridge. saved, and rebooted for good measure. tried another call and same thing.

[2014-05-16 09:02:34] VERBOSE[2471][C-00000000] netsock2.c: == Using SIP RTP TOS bits 184
[2014-05-16 09:02:34] VERBOSE[2471][C-00000000] netsock2.c: == Using SIP RTP TOS bits 184
[2014-05-16 09:02:34] VERBOSE[2471][C-00000000] netsock2.c: == Using SIP RTP CoS mark 5
[2014-05-16 09:02:34] VERBOSE[2471][C-00000000] netsock2.c: == Using SIP RTP CoS mark 5
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:1] Macro(“SIP/6126-00000000”, “user-callerid,”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:1] Macro(“SIP/6126-00000000”, “user-callerid,”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/6126-00000000”, “TOUCH_MONITOR=1400248954.0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/6126-00000000”, “TOUCH_MONITOR=1400248954.0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/6126-00000000”, “AMPUSER=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/6126-00000000”, “AMPUSER=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/6126-00000000”, “0?report”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/6126-00000000”, “0?report”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/6126-00000000”, “1?Set(REALCALLERIDNUM=6126)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/6126-00000000”, “1?Set(REALCALLERIDNUM=6126)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/6126-00000000”, “AMPUSER=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/6126-00000000”, “AMPUSER=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/6126-00000000”, “0?limit”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/6126-00000000”, “0?limit”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/6126-00000000”, “AMPUSERCIDNAME=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/6126-00000000”, “AMPUSERCIDNAME=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/6126-00000000”, “0?report”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/6126-00000000”, “0?report”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/6126-00000000”, “AMPUSERCID=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/6126-00000000”, “AMPUSERCID=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/6126-00000000”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/6126-00000000”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/6126-00000000”, “CALLERID(all)=“6126” <6126>”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/6126-00000000”, “CALLERID(all)=“6126” <6126>”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/6126-00000000”, “0?limit”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/6126-00000000”, “0?limit”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/6126-00000000”, “0?Set(GROUP(concurrency_limit)=6126)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/6126-00000000”, “0?Set(GROUP(concurrency_limit)=6126)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/6126-00000000”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/6126-00000000”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/6126-00000000”, “7?sub-ccss,s,1(from-internal,6300)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/6126-00000000”, “7?sub-ccss,s,1(from-internal,6300)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/6126-00000000”, “0?Return()”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/6126-00000000”, “0?Return()”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/6126-00000000”, “CCSS_SETUP=TRUE”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/6126-00000000”, “CCSS_SETUP=TRUE”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/6126-00000000”, “0?monitor_config,1(from-internal,6300):monitor_default,1(from-internal,6300)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/6126-00000000”, “0?monitor_config,1(from-internal,6300):monitor_default,1(from-internal,6300)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/6126-00000000”, “0?is_exten”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/6126-00000000”, “0?is_exten”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/6126-00000000”, “FALSE”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/6126-00000000”, “FALSE”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/6126-00000000”, “0?continue”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/6126-00000000”, “0?continue”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/6126-00000000”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/6126-00000000”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/6126-00000000”, “__TTL=64”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/6126-00000000”, “__TTL=64”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/6126-00000000”, “1?continue”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/6126-00000000”, “1?continue”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (macro-user-callerid,s,30)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (macro-user-callerid,s,30)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/6126-00000000”, “CALLERID(number)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/6126-00000000”, “CALLERID(number)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/6126-00000000”, “CALLERID(name)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/6126-00000000”, “CALLERID(name)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/6126-00000000”, “CDR(cnum)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/6126-00000000”, “CDR(cnum)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/6126-00000000”, “CDR(cnam)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/6126-00000000”, “CDR(cnam)=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/6126-00000000”, “CHANNEL(language)=en”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/6126-00000000”, “CHANNEL(language)=en”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:2] Set(“SIP/6126-00000000”, “MEETME_ROOMNUM=6300”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:2] Set(“SIP/6126-00000000”, “MEETME_ROOMNUM=6300”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:3] Set(“SIP/6126-00000000”, “MAX_PARTICIPANTS=0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:3] Set(“SIP/6126-00000000”, “MAX_PARTICIPANTS=0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:4] Set(“SIP/6126-00000000”, “MEETME_MUSIC=”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:4] Set(“SIP/6126-00000000”, “MEETME_MUSIC=”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:5] Gosub(“SIP/6126-00000000”, “sub-record-check,s,1(conf,6300,never)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:5] Gosub(“SIP/6126-00000000”, “sub-record-check,s,1(conf,6300,never)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/6126-00000000”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/6126-00000000”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/6126-00000000”, “1?check”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/6126-00000000”, “1?check”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (sub-record-check,s,7)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (sub-record-check,s,7)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/6126-00000000”, “__MON_FMT=wav”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/6126-00000000”, “__MON_FMT=wav”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/6126-00000000”, “1?next”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/6126-00000000”, “1?next”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (sub-record-check,s,11)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (sub-record-check,s,11)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/6126-00000000”, “0?Return()”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/6126-00000000”, “0?Return()”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/6126-00000000”, “1?Set(__REC_POLICY_MODE=never)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/6126-00000000”, “1?Set(__REC_POLICY_MODE=never)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/6126-00000000”, “0?conf,1”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/6126-00000000”, “0?conf,1”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/6126-00000000”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/6126-00000000”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/6126-00000000”, “NOW=1400248954”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/6126-00000000”, “NOW=1400248954”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/6126-00000000”, “__DAY=16”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/6126-00000000”, “__DAY=16”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/6126-00000000”, “__MONTH=05”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/6126-00000000”, “__MONTH=05”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/6126-00000000”, “__YEAR=2014”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/6126-00000000”, “__YEAR=2014”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/6126-00000000”, “__TIMESTR=20140516-090234”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/6126-00000000”, “__TIMESTR=20140516-090234”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/6126-00000000”, “__FROMEXTEN=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/6126-00000000”, “__FROMEXTEN=6126”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/6126-00000000”, “__CALLFILENAME=conf-6300-6126-20140516-090234-1400248954.0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/6126-00000000”, “__CALLFILENAME=conf-6300-6126-20140516-090234-1400248954.0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/6126-00000000”, “conf,1”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/6126-00000000”, “conf,1”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (sub-record-check,conf,1)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Goto (sub-record-check,conf,1)
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [conf@sub-record-check:1] Gosub(“SIP/6126-00000000”, “recconf,1(conf,6300,6300)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [conf@sub-record-check:1] Gosub(“SIP/6126-00000000”, “recconf,1(conf,6300,6300)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:1] Set(“SIP/6126-00000000”, “__CALLFILENAME=conf-6300-6300-20140516-090234-1400248954.0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:1] Set(“SIP/6126-00000000”, “__CALLFILENAME=conf-6300-6300-20140516-090234-1400248954.0”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:2] ExecIf(“SIP/6126-00000000”, “1?Set(DB(RECCONF/6300)=conf-6300-6300-20140516-090234-1400248954.0)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:2] ExecIf(“SIP/6126-00000000”, “1?Set(DB(RECCONF/6300)=conf-6300-6300-20140516-090234-1400248954.0)”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:3] Set(“SIP/6126-00000000”, “CONFBRIDGE(bridge,record_file)=2014/05/16/conf-6300-6300-20140516-090234-1400248954.0.wav”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:3] Set(“SIP/6126-00000000”, “CONFBRIDGE(bridge,record_file)=2014/05/16/conf-6300-6300-20140516-090234-1400248954.0.wav”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:4] ExecIf(“SIP/6126-00000000”, “1?Return()”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [recconf@sub-record-check:4] ExecIf(“SIP/6126-00000000”, “1?Return()”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [conf@sub-record-check:2] Return(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [conf@sub-record-check:2] Return(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:6] GotoIf(“SIP/6126-00000000”, “0?USER”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:6] GotoIf(“SIP/6126-00000000”, “0?USER”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:7] Answer(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:7] Answer(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:8] Wait(“SIP/6126-00000000”, “1”) in new stack
[2014-05-16 09:02:34] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:8] Wait(“SIP/6126-00000000”, “1”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:9] NoOp(“SIP/6126-00000000”, “User Options:”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:9] NoOp(“SIP/6126-00000000”, “User Options:”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:10] Set(“SIP/6126-00000000”, “CONFBRIDGE(user,dsp_drop_silence)=yes”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:10] Set(“SIP/6126-00000000”, “CONFBRIDGE(user,dsp_drop_silence)=yes”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:11] Set(“SIP/6126-00000000”, “CONFBRIDGE(user,talk_detection_events)=yes”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:11] Set(“SIP/6126-00000000”, “CONFBRIDGE(user,talk_detection_events)=yes”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:12] Set(“SIP/6126-00000000”, “CONFBRIDGE(user,music_on_hold_when_empty)=yes”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:12] Set(“SIP/6126-00000000”, “CONFBRIDGE(user,music_on_hold_when_empty)=yes”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:13] Goto(“SIP/6126-00000000”, “STARTMEETME,1”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [6300@from-internal:13] Goto(“SIP/6126-00000000”, “STARTMEETME,1”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Goto (from-internal,STARTMEETME,1)
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Goto (from-internal,STARTMEETME,1)
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:1] ExecIf(“SIP/6126-00000000”, “0?Set(CONFBRIDGE(user,music_on_hold_class)=)”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:1] ExecIf(“SIP/6126-00000000”, “0?Set(CONFBRIDGE(user,music_on_hold_class)=)”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:2] Set(“SIP/6126-00000000”, “GROUP(meetme)=6300”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:2] Set(“SIP/6126-00000000”, “GROUP(meetme)=6300”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:3] GotoIf(“SIP/6126-00000000”, “0?MEETMEFULL,1”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:3] GotoIf(“SIP/6126-00000000”, “0?MEETMEFULL,1”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:4] ConfBridge(“SIP/6126-00000000”, “6300,”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] pbx.c: – Executing [STARTMEETME@from-internal:4] ConfBridge(“SIP/6126-00000000”, “6300,”) in new stack
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] file.c: – <SIP/6126-00000000> Playing ‘conf-onlyperson.ulaw’ (language ‘en’)
[2014-05-16 09:02:35] VERBOSE[2837][C-00000000] file.c: – <SIP/6126-00000000> Playing ‘conf-onlyperson.ulaw’ (language ‘en’)
[2014-05-16 09:02:38] VERBOSE[2837][C-00000000] file.c: – <SIP/6126-00000000> Playing ‘confbridge-join.ulaw’ (language ‘en’)
[2014-05-16 09:02:38] VERBOSE[2837][C-00000000] file.c: – <SIP/6126-00000000> Playing ‘confbridge-join.ulaw’ (language ‘en’)
[2014-05-16 09:02:39] VERBOSE[2837][C-00000000] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-join.gsm’ (language ‘en’)
[2014-05-16 09:02:39] VERBOSE[2837][C-00000000] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-join.gsm’ (language ‘en’)
[2014-05-16 09:02:39] VERBOSE[2837][C-00000000] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6126-00000000
[2014-05-16 09:02:39] VERBOSE[2837][C-00000000] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6126-00000000
[2014-05-16 09:04:02] VERBOSE[2471][C-00000001] netsock2.c: == Using SIP RTP TOS bits 184
[2014-05-16 09:04:02] VERBOSE[2471][C-00000001] netsock2.c: == Using SIP RTP TOS bits 184
[2014-05-16 09:04:02] VERBOSE[2471][C-00000001] netsock2.c: == Using SIP RTP CoS mark 5
[2014-05-16 09:04:02] VERBOSE[2471][C-00000001] netsock2.c: == Using SIP RTP CoS mark 5
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:1] Macro(“SIP/6123-00000001”, “user-callerid,”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:1] Macro(“SIP/6123-00000001”, “user-callerid,”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/6123-00000001”, “TOUCH_MONITOR=1400249042.3”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/6123-00000001”, “TOUCH_MONITOR=1400249042.3”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/6123-00000001”, “AMPUSER=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/6123-00000001”, “AMPUSER=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/6123-00000001”, “0?report”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/6123-00000001”, “0?report”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/6123-00000001”, “1?Set(REALCALLERIDNUM=6123)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/6123-00000001”, “1?Set(REALCALLERIDNUM=6123)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/6123-00000001”, “AMPUSER=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/6123-00000001”, “AMPUSER=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/6123-00000001”, “0?limit”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/6123-00000001”, “0?limit”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/6123-00000001”, “AMPUSERCIDNAME=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/6123-00000001”, “AMPUSERCIDNAME=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/6123-00000001”, “0?report”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/6123-00000001”, “0?report”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/6123-00000001”, “AMPUSERCID=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/6123-00000001”, “AMPUSERCID=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/6123-00000001”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/6123-00000001”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/6123-00000001”, “CALLERID(all)=“6123” <6123>”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/6123-00000001”, “CALLERID(all)=“6123” <6123>”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/6123-00000001”, “0?limit”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/6123-00000001”, “0?limit”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/6123-00000001”, “0?Set(GROUP(concurrency_limit)=6123)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/6123-00000001”, “0?Set(GROUP(concurrency_limit)=6123)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/6123-00000001”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:14] ExecIf(“SIP/6123-00000001”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/6123-00000001”, “7?sub-ccss,s,1(from-internal,6300)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:15] GosubIf(“SIP/6123-00000001”, “7?sub-ccss,s,1(from-internal,6300)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/6123-00000001”, “0?Return()”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/6123-00000001”, “0?Return()”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/6123-00000001”, “CCSS_SETUP=TRUE”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/6123-00000001”, “CCSS_SETUP=TRUE”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/6123-00000001”, “0?monitor_config,1(from-internal,6300):monitor_default,1(from-internal,6300)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/6123-00000001”, “0?monitor_config,1(from-internal,6300):monitor_default,1(from-internal,6300)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/6123-00000001”, “0?is_exten”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/6123-00000001”, “0?is_exten”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/6123-00000001”, “FALSE”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/6123-00000001”, “FALSE”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/6123-00000001”, “0?continue”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/6123-00000001”, “0?continue”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/6123-00000001”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:17] ExecIf(“SIP/6123-00000001”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/6123-00000001”, “__TTL=64”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:18] Set(“SIP/6123-00000001”, “__TTL=64”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/6123-00000001”, “1?continue”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:19] GotoIf(“SIP/6123-00000001”, “1?continue”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (macro-user-callerid,s,30)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (macro-user-callerid,s,30)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/6123-00000001”, “CALLERID(number)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/6123-00000001”, “CALLERID(number)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/6123-00000001”, “CALLERID(name)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/6123-00000001”, “CALLERID(name)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/6123-00000001”, “CDR(cnum)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/6123-00000001”, “CDR(cnum)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/6123-00000001”, “CDR(cnam)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/6123-00000001”, “CDR(cnam)=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/6123-00000001”, “CHANNEL(language)=en”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/6123-00000001”, “CHANNEL(language)=en”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:2] Set(“SIP/6123-00000001”, “MEETME_ROOMNUM=6300”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:2] Set(“SIP/6123-00000001”, “MEETME_ROOMNUM=6300”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:3] Set(“SIP/6123-00000001”, “MAX_PARTICIPANTS=0”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:3] Set(“SIP/6123-00000001”, “MAX_PARTICIPANTS=0”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:4] Set(“SIP/6123-00000001”, “MEETME_MUSIC=”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:4] Set(“SIP/6123-00000001”, “MEETME_MUSIC=”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:5] Gosub(“SIP/6123-00000001”, “sub-record-check,s,1(conf,6300,never)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:5] Gosub(“SIP/6123-00000001”, “sub-record-check,s,1(conf,6300,never)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/6123-00000001”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/6123-00000001”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/6123-00000001”, “1?check”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/6123-00000001”, “1?check”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (sub-record-check,s,7)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (sub-record-check,s,7)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/6123-00000001”, “__MON_FMT=wav”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/6123-00000001”, “__MON_FMT=wav”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/6123-00000001”, “1?next”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/6123-00000001”, “1?next”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (sub-record-check,s,11)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (sub-record-check,s,11)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/6123-00000001”, “0?Return()”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/6123-00000001”, “0?Return()”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/6123-00000001”, “1?Set(__REC_POLICY_MODE=never)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/6123-00000001”, “1?Set(__REC_POLICY_MODE=never)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/6123-00000001”, “0?conf,1”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/6123-00000001”, “0?conf,1”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/6123-00000001”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/6123-00000001”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/6123-00000001”, “NOW=1400249042”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/6123-00000001”, “NOW=1400249042”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/6123-00000001”, “__DAY=16”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/6123-00000001”, “__DAY=16”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/6123-00000001”, “__MONTH=05”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/6123-00000001”, “__MONTH=05”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/6123-00000001”, “__YEAR=2014”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/6123-00000001”, “__YEAR=2014”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/6123-00000001”, “__TIMESTR=20140516-090402”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/6123-00000001”, “__TIMESTR=20140516-090402”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/6123-00000001”, “__FROMEXTEN=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/6123-00000001”, “__FROMEXTEN=6123”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/6123-00000001”, “__CALLFILENAME=conf-6300-6123-20140516-090402-1400249042.3”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/6123-00000001”, “__CALLFILENAME=conf-6300-6123-20140516-090402-1400249042.3”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/6123-00000001”, “conf,1”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/6123-00000001”, “conf,1”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (sub-record-check,conf,1)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Goto (sub-record-check,conf,1)
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [conf@sub-record-check:1] Gosub(“SIP/6123-00000001”, “recconf,1(conf,6300,6300)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [conf@sub-record-check:1] Gosub(“SIP/6123-00000001”, “recconf,1(conf,6300,6300)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:1] Set(“SIP/6123-00000001”, “__CALLFILENAME=conf-6300-6300-20140516-090234-1400248954.0”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:1] Set(“SIP/6123-00000001”, “__CALLFILENAME=conf-6300-6300-20140516-090234-1400248954.0”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:2] ExecIf(“SIP/6123-00000001”, “0?Set(DB(RECCONF/6300)=conf-6300-6300-20140516-090234-1400248954.0)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:2] ExecIf(“SIP/6123-00000001”, “0?Set(DB(RECCONF/6300)=conf-6300-6300-20140516-090234-1400248954.0)”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:3] Set(“SIP/6123-00000001”, “CONFBRIDGE(bridge,record_file)=2014/05/16/conf-6300-6300-20140516-090234-1400248954.0.wav”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:3] Set(“SIP/6123-00000001”, “CONFBRIDGE(bridge,record_file)=2014/05/16/conf-6300-6300-20140516-090234-1400248954.0.wav”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:4] ExecIf(“SIP/6123-00000001”, “1?Return()”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [recconf@sub-record-check:4] ExecIf(“SIP/6123-00000001”, “1?Return()”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [conf@sub-record-check:2] Return(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [conf@sub-record-check:2] Return(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:6] GotoIf(“SIP/6123-00000001”, “0?USER”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:6] GotoIf(“SIP/6123-00000001”, “0?USER”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:7] Answer(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:7] Answer(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:8] Wait(“SIP/6123-00000001”, “1”) in new stack
[2014-05-16 09:04:02] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:8] Wait(“SIP/6123-00000001”, “1”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:9] NoOp(“SIP/6123-00000001”, “User Options:”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:9] NoOp(“SIP/6123-00000001”, “User Options:”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:10] Set(“SIP/6123-00000001”, “CONFBRIDGE(user,dsp_drop_silence)=yes”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:10] Set(“SIP/6123-00000001”, “CONFBRIDGE(user,dsp_drop_silence)=yes”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:11] Set(“SIP/6123-00000001”, “CONFBRIDGE(user,talk_detection_events)=yes”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:11] Set(“SIP/6123-00000001”, “CONFBRIDGE(user,talk_detection_events)=yes”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:12] Set(“SIP/6123-00000001”, “CONFBRIDGE(user,music_on_hold_when_empty)=yes”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:12] Set(“SIP/6123-00000001”, “CONFBRIDGE(user,music_on_hold_when_empty)=yes”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:13] Goto(“SIP/6123-00000001”, “STARTMEETME,1”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [6300@from-internal:13] Goto(“SIP/6123-00000001”, “STARTMEETME,1”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Goto (from-internal,STARTMEETME,1)
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Goto (from-internal,STARTMEETME,1)
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:1] ExecIf(“SIP/6123-00000001”, “0?Set(CONFBRIDGE(user,music_on_hold_class)=)”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:1] ExecIf(“SIP/6123-00000001”, “0?Set(CONFBRIDGE(user,music_on_hold_class)=)”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:2] Set(“SIP/6123-00000001”, “GROUP(meetme)=6300”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:2] Set(“SIP/6123-00000001”, “GROUP(meetme)=6300”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:3] GotoIf(“SIP/6123-00000001”, “0?MEETMEFULL,1”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:3] GotoIf(“SIP/6123-00000001”, “0?MEETMEFULL,1”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:4] ConfBridge(“SIP/6123-00000001”, “6300,”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] pbx.c: – Executing [STARTMEETME@from-internal:4] ConfBridge(“SIP/6123-00000001”, “6300,”) in new stack
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] res_musiconhold.c: – Stopped music on hold on SIP/6126-00000000
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] res_musiconhold.c: – Stopped music on hold on SIP/6126-00000000
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] file.c: – <SIP/6123-00000001> Playing ‘confbridge-join.ulaw’ (language ‘en’)
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] file.c: – <SIP/6123-00000001> Playing ‘confbridge-join.ulaw’ (language ‘en’)
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-join.gsm’ (language ‘en’)
[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-join.gsm’ (language ‘en’)
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-leave.gsm’ (language ‘en’)
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-leave.gsm’ (language ‘en’)
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6123-00000001
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] res_musiconhold.c: – Started music on hold, class ‘default’, on SIP/6123-00000001
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/6126-00000000”, “”) in new stack
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/6126-00000000’
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/6126-00000000’
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] res_musiconhold.c: – Stopped music on hold on SIP/6123-00000001
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] res_musiconhold.c: – Stopped music on hold on SIP/6123-00000001
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-leave.gsm’ (language ‘en’)
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] file.c: – <Bridge/0x7f4480000bf8-input> Playing ‘confbridge-leave.gsm’ (language ‘en’)
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/6123-00000001”, “”) in new stack
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/6123-00000001’
[2014-05-16 09:21:37] VERBOSE[2841][C-00000001] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/6123-00000001’

7

All looks like a normal hangup, try increasing the debug level . . .

core set debug 3

and try again.

8

done. also was able to search forums and get rid of log duplicates. Log file is going to get large. anything in particular I should be looking for?

9

The 16 minute gap between

[2014-05-16 09:04:03] VERBOSE[2841][C-00000001] file.c: – Playing ‘confbridge-join.gsm’ (language ‘en’)
[2014-05-16 09:20:02] VERBOSE[2837][C-00000000] file.c: – Playing ‘confbridge-leave.gsm’ (language ‘en’)

but filter the logs to only include [2837] and [2841] (for that case anyway), something like:-

cat /var/log/asterisk/full|grep -E ‘[LEG1]|[LEG2]’

get rid of the spurious repeated stuff between the start of the conference and the end.

10

I appreciate all the help, but I think I need to have a professional take a look. Too much data for me to try and keep posting, and I’m not 100% sure what exactly to look for. Freepbx support here I come.

11

Good idea, I would have suggested you invstigate your call timers, but I saw your first post was between two dahdi channels.