Many questions about Conference Pro

[jeff.wong (Jeff)]

Please share with me if you have conference pro run without issues.

There is no any issues if I manually create a room, all features run as expected.
But “Link Conference to this user” in user management, the room work strange.

1. No Password prompt
   After changing the PIN in UCP, no password required to join the conference.
   Tried submit and save again the conference number (Applications > Conference), now the system prompt for password.
   After the lunch time, I try the conference number again, no prompt for password!

2. No prompt for “Join Message Announcement”
   (Issue is similar like password prompt)

3. No prompt for “After the tone say you name…”

4. Even successful prompt for "After the tone say you name…"
   But it not respect to the language which caller choose from previous step, it stick in English.
   IVR Flow:

• Press 1 for English, press 2 for… (Destination - Languages)
• Chosen a language (Destination - Conferences: Conference list IVR)

---

Current Asterisk Version: 13.18.0
PBX Firmware:10.13.66-22
PBX Service Pack:1.0.0.0
Conference Pro 13.0.27.7

[avayax (Johann Zurner)]

You should submit bug reports on those problems on issues.freepbx.org

[jeff.wong (Jeff)]

Let’s wait until tomorrow in case I have missed out any steps and someone can advice me here.

[cynjut (Dave Burgess)]

You’re going to need logs from /var/log/asterisk/full for all of these issues. While I agree with @avayax (these sound like bug reportable items) there may be a common error that’s getting you (like a problem with Codec or Language conversion).