If anyone is familiar with Linksys PAP2T-NA configuration problems please help. I read all the information provided on the website regarding the configuration of these ATAs. The PAPT2 is configured as recommended and it does receive calls but it will not dial. The CDR report shows “FAILED”. I ha…

Thank you very much this is very helpful. Ok so: I used the word “standard” in error, I should have written “Linksys default”. The 011 dial pattern in my FreePBX doesn’t really do anything because international calling is blocked by the SIP trunk provider and it takes my calling them to turn it o…

The ATA admin manual is at http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpvga/ata/administration/guide/ATA_AG_v3_NC-WEB.pdf . Starting on page 56, you’ll find more than you’ll ever want to know about dial plans. If you use the FreePBX recommended dial plan and add a 1NXXNXXXXXX pattern…

Ok, I understand but, what is the relationship between the dial pattern in the freePBX and the dial pattern in the ATA? Do they have to match and why do both have a dial pattern? It seems to me that one is enough either in the telephone instrument or its ATA (if it’s an analog device) or in the PB…

There are two dial plans because the ATA collects the digits and sends them to the PBX. If you want to wait until the timeout or press # at the end of dialing you can have X. as you dial plan and call it a day. That is not very elegant. Most users match the internal extensions, then the emergency…

Thanks, now I understand. I my opinion it’s far to complicated to accomplish what I see as a simple task but I am sure it carries a huge legacy and old technology compatabilities with it. Anyway, I will give it a try. In the mean time I installed a Grandstream HT502 which just works. All I had t…

Try setting the PAP2T dial plan to ([*x][*x].) and test. There will be a delay after dialing, but it should work. If not, there is something wrong with the config, other than the dial plan.

That is correct. And I am sure that the grandstream has a delay after you press the last digit. Try dialing an internal extension and see how long it takes to start ringing. I guess everyone’s definition of working is different. The grandstream “Handy Tones” are also complete turds. They run ho…

Well, I tried ([*x][*x].) and it doesn’t work. When dialing out, there is a delay and I get a busy signal and CDR log shows FAILED. At at this point I give up … not enough life left to debug these “turds”. These days I don’t even buy green bananas! But, I very much appreciate your help and I cer…

Sorry to hear you give up so easy. Steward gave you so wrong info. Should have caught that. Try just (xxxxxxxxxxx.) Dial a # at the end of the dial string just to speed things up. It’s just a matter of getting the dial strings to match what you want to send. What did you dial in the Handy Tone…

Sorry … NO … it doesn’t work, same result, (xxxxxxxxxxx.) made no difference. I know you did not call Linksys turds … I DID and I DO. Anyway, if anybody wants to exchange my 4 turds for 4 Grandstream turds, I am interested. Actually I would gladly give my 4 Linksys ATAs for two Grandstream HT502. …

FreePBX Community Forums

Linksys PAP2T-NA Configuration

General Help

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled