IVR pregunta

buenas tardes comunidad es mi primera vez en un foro tengo problemas con mi IVR y ya que no me quiere tomar el tiempo de espera de marcado directo a extencion, ya lo active y le coloque el timpo de espera y cuando llaman se activa el IVR pero al terminar el mensaje del IVR pasa directo la llamada sin tomar en cuenta el tiempo que le coloco para marcado directo. alguien me puede ayudar por favor.

Te refieres a que por ejemplo, tú tienes las entradas 1, 2 y 3 en las opciones de IVR y tienes extensiones en el rango 1XXX y si quién llama quiere marcar por ejemplo la extensión 1050 el IVR lo manda directo a la opción 1? Si es eso a lo que te refieres, debes activar la opción Strict Dial Timeout. Pero si a lo que te refieres es que la llamada pasa directo al destino de Timeout cuando finaliza el mensaje instructivo del IVR, debes verificar el tiempo de la opción Timeout, que por defecto viene en 5 segundos si mal no recuerdo.

hola buen dia gracias por tu comentario, y si efectivamente pasa directo al destino y el tiempo ya lo cambie a 15 segundo luego intente y pasa directo igual luego lo cambie 20 segundos y pasa lo mismo. ya no encuentro que hacerle para que me tome el tiempo de marcado de 4 digitos.

Tienes que habilitar la opción “Force Strict dial Timeout”

Hola Gracias por responder y por tratar de ayudarme, la opcion “Force Strict dial Timeout” esta activa y asi pasa directo sin esperar el tiempo que le coloco para las opciones de marcado directo.

Deberías adjuntar un log para que se pueda ver qué es lo que está pasando.

Bunas tardes envio LOG para ver en que me pueden ayudar.

Gracias

Eso es sólo un extracto muy pequeño e incompleto del log de la llamada. Debes tomar el log completo de una llamada desde que la llamada externa entra en el IVR, presionas los dígitos de la extensión que deseas y el IVR te lleva directo a la opción que no es la que tú habías discado.

En lo primero comienza la llamada

Gracias en lo que me puedas ayudar por faor.

Debes poner el log completo en texto para que podamos verlo. Ayúdanos a ayudarte…

Actualiza el modulo de IVR y por favor envianos los logs para revisar lo que esta sucediendo.
No nos pongas pantallazos, mejor usa un servicio como pastebin.
Saludos.

Buen dia envio log para ver si ahora me pueden ayudar. Gracias
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:6] Set(“SIP/SIPPeer_ENTEL-00000778”, “GOSUB_RETVAL=TRUE”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:7] MacroExit(“SIP/SIPPeer_ENTEL-00000778”, “”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:10] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?skipov”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (followme-sub,999,13)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:13] Set(“SIP/SIPPeer_ENTEL-00000778”, “RRNODEST=”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:14] Set(“SIP/SIPPeer_ENTEL-00000778”, “__NODEST=999”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:15] GosubIf(“SIP/SIPPeer_ENTEL-00000778”, “0?sub-fmsetcid,s,1()”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:16] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?skipprepend”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (followme-sub,999,18)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:18] Set(“SIP/SIPPeer_ENTEL-00000778”, “RecordMethod=Group”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:19] Gosub(“SIP/SIPPeer_ENTEL-00000778”, “sub-record-check,s,1(exten,999,)”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “9?initialized”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (sub-record-check,s,10)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:10] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “Recordings initialized”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:11] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “1?Set(ARG3=dontcare)”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:12] Set(“SIP/SIPPeer_ENTEL-00000778”, “REC_POLICY_MODE_SAVE=”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:13] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(REC_STATUS=NO)”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:14] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “5?checkaction”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (sub-record-check,s,17)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:17] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?sub-record-check,exten,1”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “Exten Recording Check between 930023167 and 999”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:2] Set(“SIP/SIPPeer_ENTEL-00000778”, “CALLTYPE=external”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(CALLTYPE=)”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:4] Set(“SIP/SIPPeer_ENTEL-00000778”, “CALLEE=dontcare”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:5] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(CALLEE=dontcare)”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:6] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?callee”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (sub-record-check,exten,11)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:11] Gosub(“SIP/SIPPeer_ENTEL-00000778”, “recordcheck,1(dontcare,external,999)”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “Starting recording check against dontcare”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:2] Goto(“SIP/SIPPeer_ENTEL-00000778”, “dontcare”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:3] Return(“SIP/SIPPeer_ENTEL-00000778”, “”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:12] Return(“SIP/SIPPeer_ENTEL-00000778”, “”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:20] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?skipdring”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (followme-sub,999,23)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:23] Set(“SIP/SIPPeer_ENTEL-00000778”, “STRATEGY=ringallv2-prim”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:24] Set(“SIP/SIPPeer_ENTEL-00000778”, “__RVOL=”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:25] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?skipsimple”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (followme-sub,999,28)
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:28] Set(“SIP/SIPPeer_ENTEL-00000778”, “RingGroupMethod=ringallv2-prim”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:29] Set(“SIP/SIPPeer_ENTEL-00000778”, “_FMGRP=999”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:30] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “0?DIALGRP”) in new stack
[2019-10-01 09:00:54] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:31] Answer(“SIP/SIPPeer_ENTEL-00000778”, “”) in new stack
[2019-10-01 09:00:55] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:32] Wait(“SIP/SIPPeer_ENTEL-00000778”, “1”) in new stack
[2019-10-01 09:00:56] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:33] Playback(“SIP/SIPPeer_ENTEL-00000778”, “custom/indepro-1”) in new stack
[2019-10-01 09:00:56] VERBOSE[27403][C-000003b3] file.c: <SIP/SIPPeer_ENTEL-00000778> Playing ‘custom/indepro-1.slin’ (language ‘es_MX’)
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:34] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “1?Set(DOPTS=HhTtrI):Set(DOPTS=m(Ring)HhTtI)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:35] Set(“SIP/SIPPeer_ENTEL-00000778”, “__ALT_CONFIRM_MSG=”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:36] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “0?doconfirm”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:37] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “1?ringallv21”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (followme-sub,999,40)
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:40] Macro(“SIP/SIPPeer_ENTEL-00000778”, “dial,20,HhTtrI,999”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] NoOp(“SIP/SIPPeer_ENTEL-00000778”, "Blind Transfer: , Attended Transfer: , User: , Alert Info: ") in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:2] Set(“SIP/SIPPeer_ENTEL-00000778”, “__CRM_SOURCE=930023167”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(ALERT_INFO=)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:4] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(ALERT_INFO=)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:5] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(ALERT_INFO=)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:6] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:7] AGI(“SIP/SIPPeer_ENTEL-00000778”, “dialparties.agi”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Caller ID name is ‘930023167’ number is ‘930023167’
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: CW Ignore is:
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: CF Ignore is:
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: CW IN_USE/BUSY is: 1
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Methodology of ring is ‘ringallv2-prim’
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Added extension 999 to extension map
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Extension 999 cf is disabled
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Extension 999 do not disturb is disabled
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Extension 999 has ExtensionState: 0
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: dbset CALLTRACE/999 to 930023167
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: Filtered ARG3: 999
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: RING ALL V2 :
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: RVOL_MODE ‘’
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: RVOL is:
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: dialparties.agi: RVOLPARENT is:
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] res_agi.c: <SIP/SIPPeer_ENTEL-00000778>AGI Script dialparties.agi completed, returning 0
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:10] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “Returned from dialparties with groups to dial”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:11] NoOp(“SIP/SIPPeer_ENTEL-00000778”, "ringall array ") in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:12] Set(“SIP/SIPPeer_ENTEL-00000778”, “__FMGL_DIAL=”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:13] Set(“SIP/SIPPeer_ENTEL-00000778”, “LOOPCNT=1”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:14] Set(“SIP/SIPPeer_ENTEL-00000778”, “ITER=1”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:15] Set(“SIP/SIPPeer_ENTEL-00000778”, “__EXTTOCALL=999”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:16] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “Working with 999”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:17] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:18] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:19] Set(“SIP/SIPPeer_ENTEL-00000778”, “ITER=2”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:20] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “0?ndloopbegin”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:21] Macro(“SIP/SIPPeer_ENTEL-00000778”, “dial-ringall-predial-hook,”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] MacroExit(“SIP/SIPPeer_ENTEL-00000778”, “”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:22] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(ds=SIP/999,20,HhtrIM(auto-blkvm)g)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:23] Dial(“SIP/SIPPeer_ENTEL-00000778”, “SIP/999,20,HhtrIM(auto-blkvm)b(func-apply-sipheaders^s^1),”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] netsock2.c: Using SIP RTP TOS bits 184
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] netsock2.c: Using SIP RTP CoS mark 5
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_stack.c: SIP/999-00000779 Internal Gosub(func-apply-sipheaders,s,1) start
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] ExecIf(“SIP/999-00000779”, “1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:2] NoOp(“SIP/999-00000779”, “Applying SIP Headers to channel SIP/999-00000779”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:3] Set(“SIP/999-00000779”, “TECH=SIP”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:4] Set(“SIP/999-00000779”, “SIPHEADERKEYS=”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:5] While(“SIP/999-00000779”, “0”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_while.c: Jumping to priority 10
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:11] Return(“SIP/999-00000779”, “”) in new stack
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_stack.c: Spawn extension (from-internal, 999, 1) exited non-zero on ‘SIP/999-00000779’
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_stack.c: SIP/999-00000779 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_dial.c: Called SIP/999
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_dial.c: Connected line update to SIP/SIPPeer_ENTEL-00000778 prevented.
[2019-10-01 09:01:05] VERBOSE[27403][C-000003b3] app_dial.c: SIP/999-00000779 is ringing
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_stack.c: SIP/999-00000779 Internal Gosub(crm-hangup,s,1) start
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] NoOp(“SIP/999-00000779”, “Sending Hangup to CRM”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:2] NoOp(“SIP/999-00000779”, “HANGUP CAUSE: 16”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/999-00000779”, “0?Set(__CRM_VOICEMAIL=)”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:4] NoOp(“SIP/999-00000779”, “MASTER CHANNEL: 1569931265.2047 = 1569931254.2046”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:5] GotoIf(“SIP/999-00000779”, “1?return”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx_builtins.c: Goto (crm-hangup,s,8)
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:8] Return(“SIP/999-00000779”, “”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_stack.c: Spawn extension (from-internal, 999, 1) exited non-zero on ‘SIP/999-00000779’
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_stack.c: SIP/999-00000779 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_macro.c: Spawn extension (macro-dial, s, 23) exited non-zero on ‘SIP/SIPPeer_ENTEL-00000778’ in macro ‘dial’
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Spawn extension (followme-sub, 999, 40) exited non-zero on ‘SIP/SIPPeer_ENTEL-00000778’
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_stack.c: SIP/SIPPeer_ENTEL-00000778 Internal Gosub(crm-hangup,s,1) start
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:1] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “Sending Hangup to CRM”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:2] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “HANGUP CAUSE: 0”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/SIPPeer_ENTEL-00000778”, “0?Set(__CRM_VOICEMAIL=)”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:4] NoOp(“SIP/SIPPeer_ENTEL-00000778”, “MASTER CHANNEL: 1569931254.2046 = 1569931254.2046”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:5] GotoIf(“SIP/SIPPeer_ENTEL-00000778”, “0?return”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:6] Set(“SIP/SIPPeer_ENTEL-00000778”, “__CRM_HANGUP=1”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:7] AGI(“SIP/SIPPeer_ENTEL-00000778”, “sangomacrm.agi”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] res_agi.c: <SIP/SIPPeer_ENTEL-00000778>AGI Script sangomacrm.agi completed, returning 0
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] pbx.c: Executing [[email protected]:8] Return(“SIP/SIPPeer_ENTEL-00000778”, “”) in new stack
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_stack.c: Spawn extension (followme-sub, 999, 40) exited non-zero on ‘SIP/SIPPeer_ENTEL-00000778’
[2019-10-01 09:01:14] VERBOSE[27403][C-000003b3] app_stack.c: SIP/SIPPeer_ENTEL-00000778 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=

buenos dia envio otro LOG llemando desde un anexo interno
[2019-10-01 09:47:35] VERBOSE[2876][C-000003d3] app_dial.c: SIP/100-000007b7 is ringing
[2019-10-01 09:47:38] VERBOSE[2876][C-000003d3] app_dial.c: Connected line update to SIP/SIPPeer_ENTEL-000007b6 prevented.
[2019-10-01 09:47:38] VERBOSE[2876][C-000003d3] app_dial.c: SIP/100-000007b7 answered SIP/SIPPeer_ENTEL-000007b6
[2019-10-01 09:47:38] VERBOSE[2877][C-000003d3] bridge_channel.c: Channel SIP/100-000007b7 joined ‘simple_bridge’ basic-bridge <cd25f1e4-5fa7-4453-947b-2e01a3c5d985>
[2019-10-01 09:47:38] VERBOSE[2876][C-000003d3] bridge_channel.c: Channel SIP/SIPPeer_ENTEL-000007b6 joined ‘simple_bridge’ basic-bridge <cd25f1e4-5fa7-4453-947b-2e01a3c5d985>
[2019-10-01 09:47:39] VERBOSE[2608][C-000003d4] netsock2.c: Using SIP RTP TOS bits 184
[2019-10-01 09:47:39] VERBOSE[2608][C-000003d4] netsock2.c: Using SIP RTP CoS mark 5
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/129-000007b8”, “0?ext-local,999,1:followme-check,999,1”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-check,999,1)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Gosub(“SIP/129-000007b8”, “followme-sub,999,1()”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Macro(“SIP/129-000007b8”, “user-callerid,”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Set(“SIP/129-000007b8”, “TOUCH_MONITOR=1569934059.2110”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Set(“SIP/129-000007b8”, “AMPUSER=129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] GotoIf(“SIP/129-000007b8”, “0?report”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] ExecIf(“SIP/129-000007b8”, “1?Set(REALCALLERIDNUM=129)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] Set(“SIP/129-000007b8”, “AMPUSER=129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] GotoIf(“SIP/129-000007b8”, “0?limit”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:7] Set(“SIP/129-000007b8”, “AMPUSERCIDNAME=Anexo - 129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:8] ExecIf(“SIP/129-000007b8”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:9] GotoIf(“SIP/129-000007b8”, “0?report”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:10] Set(“SIP/129-000007b8”, “AMPUSERCID=129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:11] Set(“SIP/129-000007b8”, “__DIAL_OPTIONS=HhTtr”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:12] Set(“SIP/129-000007b8”, “CALLERID(all)=“Anexo - 129” <129>”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:13] GotoIf(“SIP/129-000007b8”, “0?limit”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:14] ExecIf(“SIP/129-000007b8”, “0?Set(GROUP(concurrency_limit)=129)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:15] ExecIf(“SIP/129-000007b8”, “0?Set(CHANNEL(language)=)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:16] NoOp(“SIP/129-000007b8”, “Macro Depth is 1”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:17] GotoIf(“SIP/129-000007b8”, “1?report2:macroerror”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (macro-user-callerid,s,18)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:18] GotoIf(“SIP/129-000007b8”, “0?continue”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:19] ExecIf(“SIP/129-000007b8”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:20] Set(“SIP/129-000007b8”, “__TTL=64”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:21] GotoIf(“SIP/129-000007b8”, “1?continue”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (macro-user-callerid,s,37)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:37] Set(“SIP/129-000007b8”, “CALLERID(number)=129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:38] Set(“SIP/129-000007b8”, “CALLERID(name)=Anexo - 129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:39] GotoIf(“SIP/129-000007b8”, “0?cnum”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:40] Set(“SIP/129-000007b8”, “CDR(cnam)=Anexo - 129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:41] Set(“SIP/129-000007b8”, “CDR(cnum)=129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:42] Set(“SIP/129-000007b8”, “CHANNEL(language)=es_MX”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Set(“SIP/129-000007b8”, “DIAL_OPTIONS=HhTtrI”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] Set(“SIP/129-000007b8”, “CONNECTEDLINE(num,i)=999”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] Gosub(“SIP/129-000007b8”, “sub-presencestate-display,s,1(999)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Goto(“SIP/129-000007b8”, “state-not_set,1”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (sub-presencestate-display,state-not_set,1)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Set(“SIP/129-000007b8”, “PRESENCESTATE_DISPLAY=”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Return(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] Set(“SIP/129-000007b8”, “CONNECTEDLINE(name)=Recepcion INDEPRO”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] Set(“SIP/129-000007b8”, “FM_DIALSTATUS=NOT_INUSE”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:7] Set(“SIP/129-000007b8”, “__EXTTOCALL=999”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:8] Set(“SIP/129-000007b8”, “__PICKUPMARK=999”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:9] Macro(“SIP/129-000007b8”, “blkvm-setifempty,”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/129-000007b8”, “1?init”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (macro-blkvm-setifempty,s,4)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] Set(“SIP/129-000007b8”, “__BLKVM_CHANNEL=SIP/129-000007b8”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] Set(“SIP/129-000007b8”, “SHARED(BLKVM,SIP/129-000007b8)=TRUE”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] Set(“SIP/129-000007b8”, “GOSUB_RETVAL=TRUE”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:7] MacroExit(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:10] GotoIf(“SIP/129-000007b8”, “1?skipov”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-sub,999,13)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:13] Set(“SIP/129-000007b8”, “RRNODEST=”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:14] Set(“SIP/129-000007b8”, “__NODEST=999”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:15] GosubIf(“SIP/129-000007b8”, “0?sub-fmsetcid,s,1()”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:16] GotoIf(“SIP/129-000007b8”, “1?skipprepend”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-sub,999,18)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:18] Set(“SIP/129-000007b8”, “RecordMethod=Group”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:19] Gosub(“SIP/129-000007b8”, “sub-record-check,s,1(exten,999,)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/129-000007b8”, “0?initialized”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Set(“SIP/129-000007b8”, “__REC_STATUS=INITIALIZED”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] Set(“SIP/129-000007b8”, “NOW=1569934059”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] Set(“SIP/129-000007b8”, “__DAY=01”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] Set(“SIP/129-000007b8”, “__MONTH=10”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] Set(“SIP/129-000007b8”, “__YEAR=2019”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:7] Set(“SIP/129-000007b8”, “__TIMESTR=20191001-094739”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:8] Set(“SIP/129-000007b8”, “__FROMEXTEN=129”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:9] Set(“SIP/129-000007b8”, “__MON_FMT=wav”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:10] NoOp(“SIP/129-000007b8”, “Recordings initialized”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:11] ExecIf(“SIP/129-000007b8”, “1?Set(ARG3=dontcare)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:12] Set(“SIP/129-000007b8”, “REC_POLICY_MODE_SAVE=”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:13] ExecIf(“SIP/129-000007b8”, “0?Set(REC_STATUS=NO)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:14] GotoIf(“SIP/129-000007b8”, “5?checkaction”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (sub-record-check,s,17)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:17] GotoIf(“SIP/129-000007b8”, “1?sub-record-check,exten,1”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] NoOp(“SIP/129-000007b8”, “Exten Recording Check between 129 and 999”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Set(“SIP/129-000007b8”, “CALLTYPE=internal”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/129-000007b8”, “0?Set(CALLTYPE=)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] Set(“SIP/129-000007b8”, “CALLEE=dontcare”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] ExecIf(“SIP/129-000007b8”, “0?Set(CALLEE=dontcare)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] GotoIf(“SIP/129-000007b8”, “0?callee”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:7] GotoIf(“SIP/129-000007b8”, “1?caller”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (sub-record-check,exten,13)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:13] Set(“SIP/129-000007b8”, “RECMODE=dontcare”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:14] ExecIf(“SIP/129-000007b8”, “0?Set(RECMODE=dontcare)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:15] ExecIf(“SIP/129-000007b8”, “1?Set(RECMODE=dontcare)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:16] Gosub(“SIP/129-000007b8”, “recordcheck,1(dontcare,internal,999)”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] NoOp(“SIP/129-000007b8”, “Starting recording check against dontcare”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Goto(“SIP/129-000007b8”, “dontcare”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] Return(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:17] Return(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:20] GotoIf(“SIP/129-000007b8”, “1?skipdring”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-sub,999,23)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:23] Set(“SIP/129-000007b8”, “STRATEGY=ringallv2-prim”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:24] Set(“SIP/129-000007b8”, “__RVOL=”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:25] GotoIf(“SIP/129-000007b8”, “1?skipsimple”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-sub,999,28)
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:28] Set(“SIP/129-000007b8”, “RingGroupMethod=ringallv2-prim”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:29] Set(“SIP/129-000007b8”, “_FMGRP=999”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:30] GotoIf(“SIP/129-000007b8”, “0?DIALGRP”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:31] Answer(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:39] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:32] Wait(“SIP/129-000007b8”, “1”) in new stack
[2019-10-01 09:47:40] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:33] Playback(“SIP/129-000007b8”, “custom/indepro-1”) in new stack
[2019-10-01 09:47:40] VERBOSE[2878][C-000003d4] file.c: <SIP/129-000007b8> Playing ‘custom/indepro-1.slin’ (language ‘es_MX’)
[2019-10-01 09:47:46] VERBOSE[2876][C-000003d3] res_musiconhold.c: Started music on hold, class ‘default’, on channel ‘SIP/SIPPeer_ENTEL-000007b6’
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:34] ExecIf(“SIP/129-000007b8”, “1?Set(DOPTS=HhTtrI):Set(DOPTS=m(Ring)HhTtI)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:35] Set(“SIP/129-000007b8”, “__ALT_CONFIRM_MSG=”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:36] GotoIf(“SIP/129-000007b8”, “0?doconfirm”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:37] GotoIf(“SIP/129-000007b8”, “1?ringallv21”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-sub,999,40)
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:40] Macro(“SIP/129-000007b8”, “dial,20,HhTtrI,999”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] NoOp(“SIP/129-000007b8”, "Blind Transfer: , Attended Transfer: , User: 129, Alert Info: ") in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Set(“SIP/129-000007b8”, “__CRM_SOURCE=129”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/129-000007b8”, “1?Set(ALERT_INFO=)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] ExecIf(“SIP/129-000007b8”, “0?Set(ALERT_INFO=)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] ExecIf(“SIP/129-000007b8”, “0?Set(ALERT_INFO=)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] ExecIf(“SIP/129-000007b8”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:7] AGI(“SIP/129-000007b8”, “dialparties.agi”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Caller ID name is ‘Anexo - 129’ number is ‘129’
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: CW Ignore is:
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: CF Ignore is:
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: CW IN_USE/BUSY is: 1
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Methodology of ring is ‘ringallv2-prim’
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Added extension 999 to extension map
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Extension 999 cf is disabled
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Extension 999 do not disturb is disabled
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Extension 999 has ExtensionState: 0
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: dbset CALLTRACE/999 to 129
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: Filtered ARG3: 999
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: RING ALL V2 :
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: RVOL_MODE ‘’
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: RVOL is:
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: dialparties.agi: RVOLPARENT is:
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] res_agi.c: <SIP/129-000007b8>AGI Script dialparties.agi completed, returning 0
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:10] NoOp(“SIP/129-000007b8”, “Returned from dialparties with groups to dial”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:11] NoOp(“SIP/129-000007b8”, "ringall array ") in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:12] Set(“SIP/129-000007b8”, “__FMGL_DIAL=”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:13] Set(“SIP/129-000007b8”, “LOOPCNT=1”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:14] Set(“SIP/129-000007b8”, “ITER=1”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:15] Set(“SIP/129-000007b8”, “__EXTTOCALL=999”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:16] NoOp(“SIP/129-000007b8”, “Working with 999”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:17] ExecIf(“SIP/129-000007b8”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:18] ExecIf(“SIP/129-000007b8”, “0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:19] Set(“SIP/129-000007b8”, “ITER=2”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:20] GotoIf(“SIP/129-000007b8”, “0?ndloopbegin”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:21] Macro(“SIP/129-000007b8”, “dial-ringall-predial-hook,”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] MacroExit(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:22] ExecIf(“SIP/129-000007b8”, “0?Set(ds=SIP/999,20,HhTtrIM(auto-blkvm)g)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:23] Dial(“SIP/129-000007b8”, “SIP/999,20,HhTtrIM(auto-blkvm)b(func-apply-sipheaders^s^1),”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] netsock2.c: Using SIP RTP TOS bits 184
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] netsock2.c: Using SIP RTP CoS mark 5
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] app_stack.c: SIP/999-000007b9 Internal Gosub(func-apply-sipheaders,s,1) start
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] ExecIf(“SIP/999-000007b9”, “0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] NoOp(“SIP/999-000007b9”, “Applying SIP Headers to channel SIP/999-000007b9”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] Set(“SIP/999-000007b9”, “TECH=SIP”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] Set(“SIP/999-000007b9”, “SIPHEADERKEYS=”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] While(“SIP/999-000007b9”, “0”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] app_while.c: Jumping to priority 10
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:11] Return(“SIP/999-000007b9”, “”) in new stack
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] app_stack.c: Spawn extension (from-internal, 999, 1) exited non-zero on ‘SIP/999-000007b9’
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] app_stack.c: SIP/999-000007b9 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] app_dial.c: Called SIP/999
[2019-10-01 09:47:49] VERBOSE[2878][C-000003d4] app_dial.c: Connected line update to SIP/129-000007b8 prevented.
[2019-10-01 09:47:50] VERBOSE[2608][C-000003d4] chan_sip.c: Got SIP response 486 “Busy Here” back from 192.168.20.239:5060
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] app_dial.c: SIP/999-000007b9 is busy
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] app_dial.c: Everyone is busy/congested at this time (1:1/0/0)
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:24] Set(“SIP/129-000007b8”, “DIALSTATUS=BUSY”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:25] GosubIf(“SIP/129-000007b8”, “0?BUSY,1()”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:26] NoOp(“SIP/129-000007b8”, “Returning since nobody answered”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:27] MacroExit(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:41] Goto(“SIP/129-000007b8”, “nextstep”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (followme-sub,999,46)
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:46] Set(“SIP/129-000007b8”, “RingGroupMethod=”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:47] GotoIf(“SIP/129-000007b8”, “0?nodest”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:48] Set(“SIP/129-000007b8”, “__NODEST=”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:49] Set(“SIP/129-000007b8”, “__PICKUPMARK=”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:50] Macro(“SIP/129-000007b8”, “blkvm-clr,”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Set(“SIP/129-000007b8”, “SHARED(BLKVM,SIP/129-000007b8)=”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:2] Set(“SIP/129-000007b8”, “GOSUB_RETVAL=”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] MacroExit(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:51] Set(“SIP/129-000007b8”, “DIALSTATUS=NOANSWER”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:52] GotoIf(“SIP/129-000007b8”, “0?dohangup”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:53] Goto(“SIP/129-000007b8”, “ext-local,999,dest”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (ext-local,999,3)
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] Set(“SIP/129-000007b8”, “__PICKUPMARK=”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] GotoIf(“SIP/129-000007b8”, “0?,return,1”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Auto fallthrough, channel ‘SIP/129-000007b8’ status is ‘NOANSWER’
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] Macro(“SIP/129-000007b8”, “hangupcall,”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:1] GotoIf(“SIP/129-000007b8”, “1?theend”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:3] ExecIf(“SIP/129-000007b8”, “0?Set(CDR(recordingfile)=)”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:4] NoOp(“SIP/129-000007b8”, " monior file= ") in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:5] AGI(“SIP/129-000007b8”, “attendedtransfer-rec-restart.php,”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/attendedtransfer-rec-restart.php
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] res_agi.c: <SIP/129-000007b8>AGI Script attendedtransfer-rec-restart.php completed, returning 0
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Executing [[email protected]:6] Hangup(“SIP/129-000007b8”, “”) in new stack
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] app_macro.c: Spawn extension (macro-hangupcall, s, 6) exited non-zero on ‘SIP/129-000007b8’ in macro ‘hangupcall’
[2019-10-01 09:47:50] VERBOSE[2878][C-000003d4] pbx.c: Spawn extension (ext-local, h, 1) exited non-zero on ‘SIP/129-000007b8’
[2019-10-01 09:47:55] VERBOSE[2608][C-000003d5] netsock2.c: Using SIP RTP TOS bits 184
[2019-10-01 09:47:55] VERBOSE[2608][C-000003d5] netsock2.c: Using SIP RTP CoS mark 5
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:1] Set(“SIP/100-000007ba”, “__RINGTIMER=15”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:2] Macro(“SIP/100-000007ba”, “exten-vm,novm,125,0,0,0”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:1] Macro(“SIP/100-000007ba”, “user-callerid,”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:1] Set(“SIP/100-000007ba”, “TOUCH_MONITOR=1569934075.2112”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:2] Set(“SIP/100-000007ba”, “AMPUSER=100”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:3] GotoIf(“SIP/100-000007ba”, “0?report”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:4] ExecIf(“SIP/100-000007ba”, “1?Set(REALCALLERIDNUM=100)”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:5] Set(“SIP/100-000007ba”, “AMPUSER=100”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:6] GotoIf(“SIP/100-000007ba”, “0?limit”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:7] Set(“SIP/100-000007ba”, “AMPUSERCIDNAME=Anexo - 100”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:8] ExecIf(“SIP/100-000007ba”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:9] GotoIf(“SIP/100-000007ba”, “0?report”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:10] Set(“SIP/100-000007ba”, “AMPUSERCID=100”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:11] Set(“SIP/100-000007ba”, “__DIAL_OPTIONS=HhTtr”) in new stack
[2019-10-01 09:47:55] VERBOSE[2907][C-000003d5] pbx.c: Executing [[email protected]:12] Set(“SIP/100-000007ba”, “CALLERID(all)=“Anexo - 100” <100>”) in new stack
[2019-10-01 09:47:55] WARNING[2907][C-000003d5] ast_expr2.fl: ast_yyerror(): syntax error: syntax error, unexpected ‘>’, expecting ‘-’ or ‘!’ or ‘(’ or ‘<token>’; Input:
“”=“LIMIT” & 3 & 1 & >0 & 0>=
^
[2019-10-01 09:47:55] WARNING[2907][C-000003d5] ast_expr2.fl: If you have questions, please refer to https://wiki.asterisk.org/wiki/display/AST/Channel+Variables

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.