HI, my problem is with internal sounds of asterisk.
for example when calling voicemail, no system recordings are being
played back. However, when running asterisk
in a debug mode, i see the call coming through to the system and the
system playing back the wav files promptly.
However, no sound comes through. I have verified that the sounds are
in the correct location and that
asterisk:asterisk has access to all files, is music on hold works, but
other than that no system recordings are audible.
But this isn’t just voicemail. It’s every system recording. Such as
the feature code *60 to
play the current time. It shows the call connected and it shows to be
playing the wav file, but nothing
coming out of the speaker of the phone…didn’t just try with one phone either
In other words, asterisk shows it’s all working well. my logs:
== Spawn extension (macro-systemrecording, h, 1) exited non-zero on
’SIP/7010-081d7288’
– Executing Macro(“SIP/7010-0819b350”, “user-callerid|”) in new stack
– Executing NoOp(“SIP/7010-0819b350”, “user-callerid: device
7010”) in new stack
– Executing GotoIf(“SIP/7010-0819b350”, “0?report”) in new stack
– Executing GotoIf(“SIP/7010-0819b350”, “0?start”) in new stack
– Executing Set(“SIP/7010-0819b350”, “REALCALLERIDNUM=7010”) in new stack
– Executing NoOp(“SIP/7010-0819b350”, “REALCALLERIDNUM is 7010”)
in new stack
– Executing Set(“SIP/7010-0819b350”, “AMPUSER=7010”) in new stack
– Executing Set(“SIP/7010-0819b350”, “AMPUSERCIDNAME=Portaria”)
in new stack
– Executing GotoIf(“SIP/7010-0819b350”, “0?report”) in new stack
– Executing Set(“SIP/7010-0819b350”, “CALLERID(all)=Portaria
<7010>”) in new stack
– Executing Set(“SIP/7010-0819b350”, “REALCALLERIDNUM=7010”) in new stack
– Executing NoOp(“SIP/7010-0819b350”, “TTL: ARG1: “) in new stack
– Executing GotoIf(“SIP/7010-0819b350”, “0?continue”) in new stack
– Executing Set(“SIP/7010-0819b350”, “_TTL=64”) in new stack
– Executing GotoIf(“SIP/7010-0819b350”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,21)
– Executing NoOp(“SIP/7010-0819b350”, “Using CallerID “Portaria”
<7010>”) in new stack
– Executing Wait(“SIP/7010-0819b350”, “2”) in new stack
– Executing Macro(“SIP/7010-0819b350”,
“systemrecording|dorecord”) in new stack
– Executing Goto(“SIP/7010-0819b350”, “dorecord|1”) in new stack
– Goto (macro-systemrecording,dorecord,1)
– Executing Record(“SIP/7010-0819b350”,
”/tmp/7010-ivrrecording:wav”) in new stack
– Playing ‘beep’ (language ‘en’)
Really at a stand still until I can get this resolved so any thoughts
are much appreciated.