In desperate need of some help, i set up freePBX works great, set up some trunks, extensions etc. but i am not able to get incoming calls. if you look at my logs call gets to my system but instead of being forwarded to one of my extensions 3102 it gets dropped. here is the log file
[2012-09-27 17:05:54] VERBOSE[14324] pbx.c: – Executing [12392475844@from-trunk:1] Set(“SIP/BRCSkypeConnect-0000007d”, “__FROM_DID=12392475844”) in new stack
[2012-09-27 17:05:54] VERBOSE[14324] pbx.c: – Executing [12392475844@from-trunk:2] NoOp(“SIP/BRCSkypeConnect-0000007d”, “Received an unknown call with DID set to 12392475844”) in new stack
[2012-09-27 17:05:54] VERBOSE[14324] pbx.c: – Executing [12392475844@from-trunk:3] Goto(“SIP/BRCSkypeConnect-0000007d”, “s,a2”) in new stack
[2012-09-27 17:05:54] VERBOSE[14324] pbx.c: – Goto (from-trunk,s,2)
[2012-09-27 17:05:54] VERBOSE[14324] pbx.c: – Executing [s@from-trunk:2] Answer(“SIP/BRCSkypeConnect-0000007d”, “”) in new stack
[2012-09-27 17:05:54] VERBOSE[14324] pbx.c: – Executing [s@from-trunk:3] Wait(“SIP/BRCSkypeConnect-0000007d”, “2”) in new stack
[2012-09-27 17:05:56] VERBOSE[14324] pbx.c: – Executing [s@from-trunk:4] Playback(“SIP/BRCSkypeConnect-0000007d”, “ss-noservice”) in new stack
[2012-09-27 17:05:56] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘ss-noservice.ulaw’ (language ‘en’)
[2012-09-27 17:06:01] VERBOSE[14324] pbx.c: – Executing [s@from-trunk:5] SayAlpha(“SIP/BRCSkypeConnect-0000007d”, “12392475844”) in new stack
[2012-09-27 17:06:01] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/1.ulaw’ (language ‘en’)
[2012-09-27 17:06:02] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/2.ulaw’ (language ‘en’)
[2012-09-27 17:06:03] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/3.ulaw’ (language ‘en’)
[2012-09-27 17:06:03] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/9.ulaw’ (language ‘en’)
[2012-09-27 17:06:04] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/2.ulaw’ (language ‘en’)
[2012-09-27 17:06:04] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/4.ulaw’ (language ‘en’)
[2012-09-27 17:06:05] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/7.ulaw’ (language ‘en’)
[2012-09-27 17:06:06] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/5.ulaw’ (language ‘en’)
[2012-09-27 17:06:06] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/8.ulaw’ (language ‘en’)
[2012-09-27 17:06:07] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/4.ulaw’ (language ‘en’)
[2012-09-27 17:06:08] VERBOSE[14324] file.c: – <SIP/BRCSkypeConnect-0000007d> Playing ‘digits/4.ulaw’ (language ‘en’)
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: – Executing [s@from-trunk:6] Hangup(“SIP/BRCSkypeConnect-0000007d”, “”) in new stack
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: == Spawn extension (from-trunk, s, 6) exited non-zero on ‘SIP/BRCSkypeConnect-0000007d’
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: – Executing [h@from-trunk:1] Macro(“SIP/BRCSkypeConnect-0000007d”, “hangupcall,”) in new stack
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: – Executing [s@macro-hangupcall:1] GotoIf(“SIP/BRCSkypeConnect-0000007d”, “1?theend”) in new stack
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: – Goto (macro-hangupcall,s,3)
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: – Executing [s@macro-hangupcall:3] ExecIf(“SIP/BRCSkypeConnect-0000007d”, “0?Set(CDR(recordingfile)=)”) in new stack
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: – Executing [s@macro-hangupcall:4] Hangup(“SIP/BRCSkypeConnect-0000007d”, “”) in new stack
[2012-09-27 17:06:08] VERBOSE[14324] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/BRCSkypeConnect-0000007d’ in macro ‘hangupcall’
[2012-09-27 17:06:08] VERBOSE[14324] pbx.c: == Spawn extension (from-trunk, h, 1) exited non-zero on ‘SIP/BRCSkypeConnect-0000007d’
Can someone please please help