Hello,
I have a problem with incoming calls. The pbx don’t routing external calls to internal extensions. The calls is dropped but on the log I see the ringing signal.
This is the log
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [40364780034@from-sip-external:1] NoOp(“SIP/209.58.101.249-0000009a”, “Received incoming SIP connection from unknown peer to 40364780034”) in new stack
– Executing [40364780034@from-sip-external:2] Set(“SIP/209.58.101.249-0000009a”, “DID=40364780034”) in new stack
– Executing [40364780034@from-sip-external:3] Goto(“SIP/209.58.101.249-0000009a”, “s,1”) in new stack
– Goto (from-sip-external,s,1)
– Executing [s@from-sip-external:1] GotoIf(“SIP/209.58.101.249-0000009a”, “1?checklang:noanonymous”) in new stack
– Goto (from-sip-external,s,2)
– Executing [s@from-sip-external:2] GotoIf(“SIP/209.58.101.249-0000009a”, “0?setlanguage:from-trunk,40364780034,1”) in new stack
– Goto (from-trunk,40364780034,1)
– Executing [40364780034@from-trunk:1] Set(“SIP/209.58.101.249-0000009a”, “__FROM_DID=40364780034”) in new stack
– Executing [40364780034@from-trunk:2] Gosub(“SIP/209.58.101.249-0000009a”, “app-blacklist-check,s,1”) in new stack
– Executing [s@app-blacklist-check:1] GotoIf(“SIP/209.58.101.249-0000009a”, “0?blacklisted”) in new stack
– Executing [s@app-blacklist-check:2] Set(“SIP/209.58.101.249-0000009a”, “CALLED_BLACKLIST=1”) in new stack
– Executing [s@app-blacklist-check:3] Return(“SIP/209.58.101.249-0000009a”, “”) in new stack
– Executing [40364780034@from-trunk:3] ExecIf(“SIP/209.58.101.249-0000009a”, “1 ?Set(CALLERID(name)=unavailable)”) in new stack
– Executing [40364780034@from-trunk:4] Ringing(“SIP/209.58.101.249-0000009a”, “”) in new stack
– Executing [40364780034@from-trunk:5] Set(“SIP/209.58.101.249-0000009a”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
– Executing [40364780034@from-trunk:6] Set(“SIP/209.58.101.249-0000009a”, “CALLERPRES()=allowed_not_screened”) in new stack
– Executing [40364780034@from-trunk:7] Macro(“SIP/209.58.101.249-0000009a”, “prepend-cid,ADMIN”) in new stack
– Executing [s@macro-prepend-cid:1] GotoIf(“SIP/209.58.101.249-0000009a”, “1?REPCID”) in new stack
– Goto (macro-prepend-cid,s,5)
– Executing [s@macro-prepend-cid:5] Set(“SIP/209.58.101.249-0000009a”, “_RGPREFIX=ADMIN”) in new stack
– Executing [s@macro-prepend-cid:6] Set(“SIP/209.58.101.249-0000009a”, “CALLERID(name)=ADMINunavailable”) in new stack
– Executing [40364780034@from-trunk:8] Goto(“SIP/209.58.101.249-0000009a”, “from-did-direct,1002,1”) in new stack
– Goto (from-did-direct,1002,1)
– Executing [1002@from-did-direct:1] ExecIf(“SIP/209.58.101.249-0000009a”, “0?Set(__RINGTIMER=0)”) in new stack
– Executing [1002@from-did-direct:2] Macro(“SIP/209.58.101.249-0000009a”, “exten-vm,novm,1002,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/209.58.101.249-0000009a”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/209.58.101.249-0000009a”, “AMPUSER=unavailable”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/209.58.101.249-0000009a”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/209.58.101.249-0000009a”, “1?Set(REALCALLERIDNUM=unavailable)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/209.58.101.249-0000009a”, “AMPUSER=”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/209.58.101.249-0000009a”, “AMPUSERCIDNAME=”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/209.58.101.249-0000009a”, “1?report”) in new stack
– Goto (macro-user-callerid,s,12)
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/209.58.101.249-0000009a”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:13] Set(“SIP/209.58.101.249-0000009a”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/209.58.101.249-0000009a”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,25)
– Executing [s@macro-user-callerid:25] Set(“SIP/209.58.101.249-0000009a”, “CALLERID(number)=unavailable”) in new stack
– Executing [s@macro-user-callerid:26] Set(“SIP/209.58.101.249-0000009a”, “CALLERID(name)=ADMINunavailable”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/209.58.101.249-0000009a”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/209.58.101.249-0000009a”, “__EXTTOCALL=1002”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/209.58.101.249-0000009a”, “__PICKUPMARK=1002”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/209.58.101.249-0000009a”, “RT=”"") in new stack
– Executing [s@macro-exten-vm:6] Macro(“SIP/209.58.101.249-0000009a”, “record-enable,1002,IN”) in new stack
– Executing [s@macro-record-enable:1] GotoIf(“SIP/209.58.101.249-0000009a”, “1?check”) in new stack
– Goto (macro-record-enable,s,4)
– Executing [s@macro-record-enable:4] ExecIf(“SIP/209.58.101.249-0000009a”, “0?MacroExit()”) in new stack
– Executing [s@macro-record-enable:5] GotoIf(“SIP/209.58.101.249-0000009a”, “0?Group:OUT”) in new stack
– Goto (macro-record-enable,s,15)
– Executing [s@macro-record-enable:15] GotoIf(“SIP/209.58.101.249-0000009a”, “1?IN”) in new stack
– Goto (macro-record-enable,s,20)
– Executing [s@macro-record-enable:20] ExecIf(“SIP/209.58.101.249-0000009a”, “1?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:7] Macro(“SIP/209.58.101.249-0000009a”, “dial-one,tr,1002”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/209.58.101.249-0000009a”, “DEXTEN=1002”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/209.58.101.249-0000009a”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“SIP/209.58.101.249-0000009a”, “0?screen,1”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“SIP/209.58.101.249-0000009a”, “0?cf,1”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“SIP/209.58.101.249-0000009a”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“SIP/209.58.101.249-0000009a”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“SIP/209.58.101.249-0000009a”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“SIP/209.58.101.249-0000009a”, “EXTHASCW=”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/209.58.101.249-0000009a”, “1?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,12)
– Executing [s@macro-dial-one:12] GotoIf(“SIP/209.58.101.249-0000009a”, “0?docfu:skip3”) in new stack
– Goto (macro-dial-one,s,16)
– Executing [s@macro-dial-one:16] GotoIf(“SIP/209.58.101.249-0000009a”, “1?next2:continue”) in new stack
– Goto (macro-dial-one,s,17)
– Executing [s@macro-dial-one:17] GotoIf(“SIP/209.58.101.249-0000009a”, “1?continue”) in new stack
– Goto (macro-dial-one,s,25)
– Executing [s@macro-dial-one:25] GotoIf(“SIP/209.58.101.249-0000009a”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:26] GosubIf(“SIP/209.58.101.249-0000009a”, “1?dstring,1:dlocal,1”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“SIP/209.58.101.249-0000009a”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“SIP/209.58.101.249-0000009a”, “DEVICES=1002”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“SIP/209.58.101.249-0000009a”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“SIP/209.58.101.249-0000009a”, “0?Set(DEVICES=002)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“SIP/209.58.101.249-0000009a”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“SIP/209.58.101.249-0000009a”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“SIP/209.58.101.249-0000009a”, “THISDIAL=SIP/1002”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“SIP/209.58.101.249-0000009a”, “1?zap2dahdi,1”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/209.58.101.249-0000009a”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/209.58.101.249-0000009a”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/209.58.101.249-0000009a”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/209.58.101.249-0000009a”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/209.58.101.249-0000009a”, “THISPART2=SIP/1002”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/209.58.101.249-0000009a”, “0?Set(THISPART2=DAHDI/1002)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/209.58.101.249-0000009a”, “NEWDIAL=SIP/1002&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/209.58.101.249-0000009a”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/209.58.101.249-0000009a”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/209.58.101.249-0000009a”, “THISDIAL=SIP/1002”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/209.58.101.249-0000009a”, “”) in new stack
– Executing [dstring@macro-dial-one:9] Set(“SIP/209.58.101.249-0000009a”, “DSTRING=SIP/1002&”) in new stack
– Executing [dstring@macro-dial-one:10] Set(“SIP/209.58.101.249-0000009a”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:11] GotoIf(“SIP/209.58.101.249-0000009a”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:12] Set(“SIP/209.58.101.249-0000009a”, “DSTRING=SIP/1002”) in new stack
– Executing [dstring@macro-dial-one:13] Return(“SIP/209.58.101.249-0000009a”, “”) in new stack
– Executing [s@macro-dial-one:27] GotoIf(“SIP/209.58.101.249-0000009a”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GotoIf(“SIP/209.58.101.249-0000009a”, “1?skiptrace”) in new stack
– Goto (macro-dial-one,s,30)
– Executing [s@macro-dial-one:30] Set(“SIP/209.58.101.249-0000009a”, “D_OPTIONS=tr”) in new stack
– Executing [s@macro-dial-one:31] ExecIf(“SIP/209.58.101.249-0000009a”, “0?SIPAddHeader(Alert-Info: )”) in new stack
– Executing [s@macro-dial-one:32] ExecIf(“SIP/209.58.101.249-0000009a”, “0?SIPAddHeader()”) in new stack
– Executing [s@macro-dial-one:33] ExecIf(“SIP/209.58.101.249-0000009a”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:34] GosubIf(“SIP/209.58.101.249-0000009a”, “0?qwait,1”) in new stack
– Executing [s@macro-dial-one:35] Set(“SIP/209.58.101.249-0000009a”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:36] Set(“SIP/209.58.101.249-0000009a”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:37] GotoIf(“SIP/209.58.101.249-0000009a”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:38] Dial(“SIP/209.58.101.249-0000009a”, “SIP/1002,tr”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called 1002
– SIP/1002-0000009b is ringing
– SIP/1002-0000009b is ringing
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– SIP/1002-0000009b is ringing
– Executing [40364780034@from-sip-external:1] NoOp(“SIP/209.58.101.249-0000009c”, “Received incoming SIP connection from unknown peer to 40364780034”) in new stack
– Executing [40364780034@from-sip-external:2] Set(“SIP/209.58.101.249-0000009c”, “DID=40364780034”) in new stack
– Executing [40364780034@from-sip-external:3] Goto(“SIP/209.58.101.249-0000009c”, “s,1”) in new stack
– Goto (from-sip-external,s,1)
– Executing [s@from-sip-external:1] GotoIf(“SIP/209.58.101.249-0000009c”, “1?checklang:noanonymous”) in new stack
– Goto (from-sip-external,s,2)
– Executing [s@from-sip-external:2] GotoIf(“SIP/209.58.101.249-0000009c”, “0?setlanguage:from-trunk,40364780034,1”) in new stack
– Goto (from-trunk,40364780034,1)
– Executing [40364780034@from-trunk:1] Set(“SIP/209.58.101.249-0000009c”, “__FROM_DID=40364780034”) in new stack
– Executing [40364780034@from-trunk:2] Gosub(“SIP/209.58.101.249-0000009c”, “app-blacklist-check,s,1”) in new stack
– Executing [s@app-blacklist-check:1] GotoIf(“SIP/209.58.101.249-0000009c”, “0?blacklisted”) in new stack
– Executing [s@app-blacklist-check:2] Set(“SIP/209.58.101.249-0000009c”, “CALLED_BLACKLIST=1”) in new stack
– Executing [s@app-blacklist-check:3] Return(“SIP/209.58.101.249-0000009c”, “”) in new stack
– Executing [40364780034@from-trunk:3] ExecIf(“SIP/209.58.101.249-0000009c”, “1 ?Set(CALLERID(name)=unavailable)”) in new stack
– Executing [40364780034@from-trunk:4] Ringing(“SIP/209.58.101.249-0000009c”, “”) in new stack
– Executing [40364780034@from-trunk:5] Set(“SIP/209.58.101.249-0000009c”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
– Executing [40364780034@from-trunk:6] Set(“SIP/209.58.101.249-0000009c”, “CALLERPRES()=allowed_not_screened”) in new stack
– Executing [40364780034@from-trunk:7] Macro(“SIP/209.58.101.249-0000009c”, “prepend-cid,ADMIN”) in new stack
– Executing [s@macro-prepend-cid:1] GotoIf(“SIP/209.58.101.249-0000009c”, “1?REPCID”) in new stack
– Goto (macro-prepend-cid,s,5)
– Executing [s@macro-prepend-cid:5] Set(“SIP/209.58.101.249-0000009c”, “_RGPREFIX=ADMIN”) in new stack
– Executing [s@macro-prepend-cid:6] Set(“SIP/209.58.101.249-0000009c”, “CALLERID(name)=ADMINunavailable”) in new stack
– Executing [40364780034@from-trunk:8] Goto(“SIP/209.58.101.249-0000009c”, “from-did-direct,1002,1”) in new stack
– Goto (from-did-direct,1002,1)
– Executing [1002@from-did-direct:1] ExecIf(“SIP/209.58.101.249-0000009c”, “0?Set(__RINGTIMER=0)”) in new stack
– Executing [1002@from-did-direct:2] Macro(“SIP/209.58.101.249-0000009c”, “exten-vm,novm,1002,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/209.58.101.249-0000009c”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/209.58.101.249-0000009c”, “AMPUSER=unavailable”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/209.58.101.249-0000009c”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/209.58.101.249-0000009c”, “1?Set(REALCALLERIDNUM=unavailable)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/209.58.101.249-0000009c”, “AMPUSER=”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/209.58.101.249-0000009c”, “AMPUSERCIDNAME=”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/209.58.101.249-0000009c”, “1?report”) in new stack
– Goto (macro-user-callerid,s,12)
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/209.58.101.249-0000009c”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:13] Set(“SIP/209.58.101.249-0000009c”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:14] GotoIf(“SIP/209.58.101.249-0000009c”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,25)
– SIP/1002-0000009b is ringing
– Executing [s@macro-user-callerid:25] Set(“SIP/209.58.101.249-0000009c”, “CALLERID(number)=unavailable”) in new stack
– Executing [s@macro-user-callerid:26] Set(“SIP/209.58.101.249-0000009c”, “CALLERID(name)=ADMINunavailable”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/209.58.101.249-0000009c”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/209.58.101.249-0000009c”, “__EXTTOCALL=1002”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/209.58.101.249-0000009c”, “__PICKUPMARK=1002”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/209.58.101.249-0000009c”, “RT=”"") in new stack
– Executing [s@macro-exten-vm:6] Macro(“SIP/209.58.101.249-0000009c”, “record-enable,1002,IN”) in new stack
– Executing [s@macro-record-enable:1] GotoIf(“SIP/209.58.101.249-0000009c”, “1?check”) in new stack
– Goto (macro-record-enable,s,4)
– Executing [s@macro-record-enable:4] ExecIf(“SIP/209.58.101.249-0000009c”, “0?MacroExit()”) in new stack
– Executing [s@macro-record-enable:5] GotoIf(“SIP/209.58.101.249-0000009c”, “0?Group:OUT”) in new stack
– Goto (macro-record-enable,s,15)
– Executing [s@macro-record-enable:15] GotoIf(“SIP/209.58.101.249-0000009c”, “1?IN”) in new stack
– Goto (macro-record-enable,s,20)
– Executing [s@macro-record-enable:20] ExecIf(“SIP/209.58.101.249-0000009c”, “1?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:7] Macro(“SIP/209.58.101.249-0000009c”, “dial-one,tr,1002”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/209.58.101.249-0000009c”, “DEXTEN=1002”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/209.58.101.249-0000009c”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“SIP/209.58.101.249-0000009c”, “0?screen,1”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“SIP/209.58.101.249-0000009c”, “0?cf,1”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“SIP/209.58.101.249-0000009c”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“SIP/209.58.101.249-0000009c”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“SIP/209.58.101.249-0000009c”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“SIP/209.58.101.249-0000009c”, “EXTHASCW=”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/209.58.101.249-0000009c”, “1?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,12)
– Executing [s@macro-dial-one:12] GotoIf(“SIP/209.58.101.249-0000009c”, “0?docfu:skip3”) in new stack
– Goto (macro-dial-one,s,16)
== Manager ‘admin’ logged off from 127.0.0.1
– Executing [s@macro-dial-one:16] GotoIf(“SIP/209.58.101.249-0000009c”, “1?next2:continue”) in new stack
– Goto (macro-dial-one,s,17)
– Executing [s@macro-dial-one:17] GotoIf(“SIP/209.58.101.249-0000009c”, “0?continue”) in new stack
– Executing [s@macro-dial-one:18] ExecIf(“SIP/209.58.101.249-0000009c”, “0?Set(DIALSTATUS=BUSY)”) in new stack
– Executing [s@macro-dial-one:19] GotoIf(“SIP/209.58.101.249-0000009c”, “0?cwinusebusy”) in new stack
– Executing [s@macro-dial-one:20] Set(“SIP/209.58.101.249-0000009c”, “DEXTEN=”) in new stack
– Executing [s@macro-dial-one:21] Set(“SIP/209.58.101.249-0000009c”, “DIALSTATUS=BUSY”) in new stack
– Executing [s@macro-dial-one:22] Goto(“SIP/209.58.101.249-0000009c”, “nodial”) in new stack
– Goto (macro-dial-one,s,42)
– Executing [s@macro-dial-one:42] ExecIf(“SIP/209.58.101.249-0000009c”, “0?Set(DIALSTATUS=NOANSWER)”) in new stack
– Executing [s@macro-dial-one:43] NoOp(“SIP/209.58.101.249-0000009c”, “Returned from dial-one with nothing to call and DIALSTATUS: BUSY”) in new stack
– Executing [s@macro-dial-one:44] MacroExit(“SIP/209.58.101.249-0000009c”, “”) in new stack
– Executing [s@macro-exten-vm:8] GotoIf(“SIP/209.58.101.249-0000009c”, “0?exit”) in new stack
– Executing [s@macro-exten-vm:9] Set(“SIP/209.58.101.249-0000009c”, “SV_DIALSTATUS=BUSY”) in new stack
– Executing [s@macro-exten-vm:10] GosubIf(“SIP/209.58.101.249-0000009c”, “0?docfu,1”) in new stack
– Executing [s@macro-exten-vm:11] GosubIf(“SIP/209.58.101.249-0000009c”, “0?docfb,1”) in new stack
– Executing [s@macro-exten-vm:12] Set(“SIP/209.58.101.249-0000009c”, “DIALSTATUS=BUSY”) in new stack
– Executing [s@macro-exten-vm:13] ExecIf(“SIP/209.58.101.249-0000009c”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:14] GotoIf(“SIP/209.58.101.249-0000009c”, “1?s-BUSY,1”) in new stack
– Goto (macro-exten-vm,s-BUSY,1)
– Executing [s-BUSY@macro-exten-vm:1] GotoIf(“SIP/209.58.101.249-0000009c”, “0?exit,1”) in new stack
– Executing [s-BUSY@macro-exten-vm:2] PlayTones(“SIP/209.58.101.249-0000009c”, “busy”) in new stack
– Executing [s-BUSY@macro-exten-vm:3] Busy(“SIP/209.58.101.249-0000009c”, “20”) in new stack
– g729 frames
– length: count
== Spawn extension (macro-exten-vm, s-BUSY, 3) exited non-zero on ‘SIP/209.58.101.249-0000009c’ in macro ‘exten-vm’
== Spawn extension (from-did-direct, 1002, 2) exited non-zero on ‘SIP/209.58.101.249-0000009c’
– Executing [h@from-did-direct:1] Macro(“SIP/209.58.101.249-0000009c”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/209.58.101.249-0000009c”, “1?noautomon”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] NoOp(“SIP/209.58.101.249-0000009c”, “TOUCH_MONITOR_OUTPUT=”) in new stack
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/209.58.101.249-0000009c”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/209.58.101.249-0000009c”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,10)
– Executing [s@macro-hangupcall:10] GotoIf(“SIP/209.58.101.249-0000009c”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,12)
– Executing [s@macro-hangupcall:12] DeadAGI(“SIP/209.58.101.249-0000009c”, “chiamatadown.php”) in new stack
– Executing [s@macro-hangupcall:13] Hangup(“SIP/209.58.101.249-0000009c”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 13) exited non-zero on ‘SIP/209.58.101.249-0000009c’ in macro ‘hangupcall’
== Spawn extension (from-did-direct, h, 1) exited non-zero on ‘SIP/209.58.101.249-0000009c’
– SIP/1002-0000009b is ringing