Incoming calls don't work

Hey all,

I’m setting up a Asterisk server with the FreePBX webGUI at home.

This is my situation:
POTS – Asterisk server – SIP softphone

After a bit of struggling I can make outbound calls via the sip softphone over the PSTN.

But incoming calls don’t work… I made a catch-all inbound route with as destination my softphone extension.

If I call my own PSTN number (with a mobile phone) I get this in the Asterisk:

-- Starting simple switch on 'DAHDI/1-1' -- Executing [[email protected]:1] Set("DAHDI/1-1", "__FROM_DID=s") in new stack -- Executing [[email protected]:2] ExecIf("DAHDI/1-1", "1 ?Set(CALLERID(name)=)") in new stack -- Executing [[email protected]:3] Set("DAHDI/1-1", "__CALLINGPRES_SV=allowed_not_screened") in new stack -- Executing [[email protected]:4] Set("DAHDI/1-1", "CALLERPRES()=allowed_not_screened") in new stack -- Executing [[email protected]:5] Goto("DAHDI/1-1", "app-blackhole,hangup,1") in new stack -- Goto (app-blackhole,hangup,1) -- Executing [[email protected]:1] NoOp("DAHDI/1-1", "Blackhole Dest: Hangup") in new stack -- Executing [[email protected]:2] Hangup("DAHDI/1-1", "") in new stack == Spawn extension (app-blackhole, hangup, 2) exited non-zero on 'DAHDI/1-1' -- Hanging up on 'DAHDI/1-1' -- Hungup 'DAHDI/1-1' -- Starting simple switch on 'DAHDI/1-1' -- Executing [[email protected]:1] Set("DAHDI/1-1", "__FROM_DID=s") in new stack -- Executing [[email protected]:2] ExecIf("DAHDI/1-1", "1 ?Set(CALLERID(name)=)") in new stack -- Executing [[email protected]:3] Set("DAHDI/1-1", "__CALLINGPRES_SV=allowed_not_screened") in new stack -- Executing [[email protected]:4] Set("DAHDI/1-1", "CALLERPRES()=allowed_not_screened") in new stack -- Executing [[email protected]:5] Goto("DAHDI/1-1", "app-blackhole,hangup,1") in new stack -- Goto (app-blackhole,hangup,1) -- Executing [[email protected]:1] NoOp("DAHDI/1-1", "Blackhole Dest: Hangup") in new stack -- Executing [[email protected]:2] Hangup("DAHDI/1-1", "") in new stack
I don’t know what that stuff means lol, but my softphone doesn’t ring.

Can anyone help me a bit?

(Sorry for my bad English btw)