Inbound calls fail

Hi!

I’m new at FreePBX but I run a Trixbox machen and have done that 3 yers.

I coppied all settings from Trixbox but it doesent work propperly.
Outbound calls seems to work fine, but inbound calls onely works somtimes. When I make an inbound call from my cellphone, one of the numbers works fine, the otherone doesent.
Customers have told med that they can’t call the number that I can call from my cell!?

I’m not sure if its a probroblem with trunk settings or the inbound route settings?
The settings in inbound route seems straaigt forword…
Im using an IVR

I’v tryed to find a sulution for weeks…
Ples help me

Trunk settings

Trunk Name? T3
Outbound Caller ID? One of the phone number

Outgoing settings
Trunk Name? T3

PEER Details?
username=************
type=peer
secret=********
nat=auto
insecure=very
host=sip.clubtele.se
dtmfmode=rfc2833

USER Context? Ive used the username

USER Details?

username=************
type=user
secret=***********
port=5060
pogressinband=never
host=sip.clubtele.se
dtmfmode=rfc2833
context=from-pstn
allow=g711&g723

Register String?

Usename:[email protected]

/Fredrik from Sweden

http://wiki.freepbx.org/display/GHWF/Providing+Great+Debug

Hi!

I’m sorry for posting the hole lot, but I don’t know what’s important.

I have 2 trunks, but 046260596 in the debug is refering to T2 and the number I call is in T3.

Have a good weekend

Last login: Sat Jan 10 18:23:51 2015 from 192.168.176.120


| | __ ___ | _ | __ ) / /
| |
| '
/ _ / _ \ |
) | _ \ /
| || | | __/ __/ __/| |) /
|
| |
| _|_|| |__//_\

Interface eth0 IP: 192.168.176.200
Interface eth0 MAC: 00:12:79:67:7F:F5

Please note most tasks should be handled through the FreePBX UI.
You can access the FreePBX GUI by typing one of the above IP’s in to your web br
owser.
For support please visit http://www.freepbx.org/support-and-professional-service
s

[[email protected] ~]# tail -f /var/log/asterisk/full
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/sip_r
egistrations.conf’: Found
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/sip_c
ustom.conf’: Found
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/sip_a
dditional.conf’: Found
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/sip_c
ustom_post.conf’: Found
[2015-01-10 18:52:19] WARNING[25636] res_phoneprov.c: Unable to load users.conf
[2015-01-10 18:52:19] VERBOSE[25636] loader.c: – Reloading module ‘res_rtp_
asterisk.so’ (Asterisk RTP Stack)
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/rtp.c
onf’: Found
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/rtp_a
dditional.conf’: Found
[2015-01-10 18:52:19] VERBOSE[25636] config.c: == Parsing ‘/etc/asterisk/rtp_c
ustom.conf’: Found
[2015-01-10 18:52:19] VERBOSE[25636] res_rtp_asterisk.c: == RTP Allocating fro
m port range 10000 -> 20000
[2015-01-10 19:05:31] VERBOSE[2131][C-00000008] netsock2.c: == Using SIP RTP T
OS bits 184
[2015-01-10 19:05:31] VERBOSE[2131][C-00000008] netsock2.c: == Using SIP RTP C
oS mark 5
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:1] Set(“SIP/046260596-Affinity-00000008”
, “GROUP()=OUT_7”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:2] Goto(“SIP/046260596-Affinity-00000008
”, “from-trunk,04613936,1”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Goto (from-trunk,
04613936,1)
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:1] Set(“SIP/046260596-Affinity-00000008”, “__FROM_DID=04613936”
) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:2] Set(“SIP/046260596-Affinity-00000008”, “CHANNEL(language)=se”
) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:3] Gosub(“SIP/046260596-Affinity-00000008”, “sub-record-check,s,
1(in,04613936,dontcare)”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:1] GotoIf(“SIP/046260596-Affinity-00000008”, “0?initialized”) in n
ew stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:2] Set(“SIP/046260596-Affinity-00000008”, “__REC_STATUS=INITIALIZE
D”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:3] Set(“SIP/046260596-Affinity-00000008”, “NOW=1420913131”) in new
stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:4] Set(“SIP/046260596-Affinity-00000008”, “__DAY=10”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:5] Set(“SIP/046260596-Affinity-00000008”, “__MONTH=01”) in new sta
ck
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:6] Set(“SIP/046260596-Affinity-00000008”, “__YEAR=2015”) in new st
ack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:7] Set(“SIP/046260596-Affinity-00000008”, “__TIMESTR=20150110-1905
31”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:8] Set(“SIP/046260596-Affinity-00000008”, “__FROMEXTEN=unknown”) i
n new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:9] Set(“SIP/046260596-Affinity-00000008”, “__MON_FMT=wav”) in new
stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:10] NoOp(“SIP/046260596-Affinity-00000008”, “Recordings initialize
d”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:11] ExecIf(“SIP/046260596-Affinity-00000008”, “0?Set(ARG3=dontcare
)”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:12] Set(“SIP/046260596-Affinity-00000008”, “REC_POLICY_MODE_SAVE=”
) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:13] GotoIf(“SIP/046260596-Affinity-00000008”, “2?checkaction”) in
new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Goto (sub-record-
check,s,16)
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] record-check:16] GotoIf(“SIP/046260596-Affinity-00000008”, “1?sub-record-check,
in,1”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Goto (sub-record-
check,in,1)
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected]
-record-check:1] NoOp(“SIP/046260596-Affinity-00000008”, “Inbound Recording Che
ck to 04613936”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected]
-record-check:2] Set(“SIP/046260596-Affinity-00000008”, “FROMEXTEN=unknown”) in
new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected]
-record-check:3] ExecIf(“SIP/046260596-Affinity-00000008”, “10?Set(FROMEXTEN=07
08229994)”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected]
-record-check:4] Gosub(“SIP/046260596-Affinity-00000008”, “recordcheck,1(dontca
re,in,04613936)”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [record
[email protected]:1] NoOp(“SIP/046260596-Affinity-00000008”, “Starting rec
ording check against dontcare”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [record
[email protected]:2] Goto(“SIP/046260596-Affinity-00000008”, “dontcare”) i
n new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Goto (sub-record-
check,recordcheck,3)
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [record
[email protected]:3] Return(“SIP/046260596-Affinity-00000008”, “”) in new
stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected]
-record-check:5] Return(“SIP/046260596-Affinity-00000008”, “”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:4] Gosub(“SIP/046260596-Affinity-00000008”, “app-blacklist-check
,s,1()”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] blacklist-check:1] GotoIf(“SIP/046260596-Affinity-00000008”, “0?blacklisted”) i
n new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] blacklist-check:2] Set(“SIP/046260596-Affinity-00000008”, “CALLED_BLACKLIST=1”)
in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] blacklist-check:3] Return(“SIP/046260596-Affinity-00000008”, “”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:5] Set(“SIP/046260596-Affinity-00000008”, “CDR(did)=04613936”)
in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:6] ExecIf(“SIP/046260596-Affinity-00000008”, “0 ?Set(CALLERID(na
me)=070822999)”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:7] Set(“SIP/046260596-Affinity-00000008”, “CHANNEL(musicclass)=d
efault”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:8] Set(“SIP/046260596-Affinity-00000008”, “__MOHCLASS=default”)
in new stack
[2015-01-10 19:05:31] WARNING[26452][C-00000008] func_channel.c: Unknown or unav
ailable item requested: ‘reversecharge’
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:9] GotoIf(“SIP/046260596-Affinity-00000008”, “0?macro-hangupcall
”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:10] Set(“SIP/046260596-Affinity-00000008”, “__CALLINGPRES_SV=all
owed_not_screened”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:11] Set(“SIP/046260596-Affinity-00000008”, “CALLERPRES()=allowed
_not_screened”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [046139
[email protected]:12] Goto(“SIP/046260596-Affinity-00000008”, “ivr-1,s,1”) in new
stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Goto (ivr-1,s,1)
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:1] Set(“SIP/046260596-Affinity-00000008”, “_IVR_CONTEXT_ivr-1=”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:2] Set(“SIP/046260596-Affinity-00000008”, “_IVR_CONTEXT=ivr-1”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:3] Set(“SIP/046260596-Affinity-00000008”, “__IVR_RETVM=”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:4] GotoIf(“SIP/046260596-Affinity-00000008”, “0?skip”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:5] Answer(“SIP/046260596-Affinity-00000008”, “”) in new stack
[2015-01-10 19:05:31] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:6] Wait(“SIP/046260596-Affinity-00000008”, “1”) in new stack
[2015-01-10 19:05:32] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:7] Set(“SIP/046260596-Affinity-00000008”, “IVR_MSG=custom/0-oppettider-val”)
in new stack
[2015-01-10 19:05:32] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:8] Set(“SIP/046260596-Affinity-00000008”, “TIMEOUT(digit)=3”) in new stack
[2015-01-10 19:05:32] VERBOSE[26452][C-00000008] func_timeout.c: – Digit ti
meout set to 3.000
[2015-01-10 19:05:32] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:9] ExecIf(“SIP/046260596-Affinity-00000008”, “1?Background(custom/0-oppettide
r-val)”) in new stack
[2015-01-10 19:05:32] VERBOSE[26452][C-00000008] file.c: – <SIP/046260596-
Affinity-00000008> Playing ‘custom/0-oppettider-val.slin’ (language ‘se’)
[2015-01-10 19:05:59] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected] 1:10] WaitExten(“SIP/046260596-Affinity-00000008”, “0,”) in new stack
[2015-01-10 19:06:02] NOTICE[2131] chan_sip.c: Disconnecting call ‘SIP/046260596
5-Affinity-00000008’ for lack of RTP activity in 31 seconds
[2015-01-10 19:06:02] VERBOSE[26452][C-00000008] pbx.c: == Spawn extension (iv
r-1, s, 10) exited non-zero on ‘SIP/046260596-Affinity-00000008’
[2015-01-10 19:06:02] VERBOSE[26452][C-00000008] pbx.c: – Executing [[email protected]
1:1] Hangup(“SIP/046260596-Affinity-00000008”, “”) in new stack
[2015-01-10 19:06:02] VERBOSE[26452][C-00000008] pbx.c: == Spawn extension (iv
r-1, h, 1) exited non-zero on ‘SIP/046260596-Affinity-00000008’

And your inbound routes?

Thanks for putting up with me!

Description? 04613936

DID Number? 04613936

Language? se

Set destination
IVR 0-opettider-val

That would seem to be exactly what is happening

070822999 (a mobile phone number) called 046139363 (a landline in Lund), the system answered it and it was sent to the IVR “0-opettider-val” (where they chose to hangup, presumably you were closed)

P.S. I would delete your g723 codec allow, it is nasty for asterisk :wink:
p.p.s. Make your mind up is the DDI 046139363 or 04613936 ?

That is what suppos to happen, but when I cal 04613936 the caller don’t hear annything.
It looks like when I call another number thas is directed to the same IVR, but I don’t get any messenges and after 30 sek it diskonets insted of forwording the call to a Queue

I’m still confused, the original call was ansered:

again, why does the call come to 046139363 and not 04613936 if that is your DDI, call your carrier for clarification, and disable g723 in case .

:smile:

DDI is 046139363, I was unsure if ther was any backside of writing the correct number.

I tested removing g723 codec, but no differens

I would route 04613936 directly to a phone first. and add

deny=ALL

before allowing codecs.

:cry:

when I route 04613936 to 1002, it disconnects.

stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:4] Set(“SIP/046260596-Affinity-0000000b”, “__PICKUPMARK=1002”) in ne
w stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:5] Set(“SIP/046260596-Affinity-0000000b”, “RT=”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:6] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Macro(vm,novm,DIRECT
DIAL,)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:7] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?MacroExit()”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:8] Gosub(“SIP/046260596-Affinity-0000000b”, “sub-record-check,s,1(ex
ten,1002,)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] record-check:1] GotoIf(“SIP/046260596-Affinity-0000000b”, “10?initialized”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (sub-record-
check,s,10)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] record-check:10] NoOp(“SIP/046260596-Affinity-0000000b”, “Recordings initialize
d”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] record-check:11] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(ARG3=dontcare
)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] record-check:12] Set(“SIP/046260596-Affinity-0000000b”, “REC_POLICY_MODE_SAVE=”
) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] record-check:13] GotoIf(“SIP/046260596-Affinity-0000000b”, “5?checkaction”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (sub-record-
check,s,16)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] record-check:16] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?sub-record-check,
exten,1”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (sub-record-
check,exten,1)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:1] NoOp(“SIP/046260596-Affinity-0000000b”, “Exten Recording Ch
eck between 070741488 and 1002”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:2] Set(“SIP/046260596-Affinity-0000000b”, “CALLTYPE=external”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:3] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(CALLTYPE=)
”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:4] Set(“SIP/046260596-Affinity-0000000b”, “CALLEE=dontcare”) i
n new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:5] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(CALLEE=don
tcare)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:6] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?callee”) in ne
w stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (sub-record-
check,exten,11)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:11] Gosub(“SIP/046260596-Affinity-0000000b”, “recordcheck,1(do
ntcare,external,1002)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [record
[email protected]:1] NoOp(“SIP/046260596-Affinity-0000000b”, “Starting rec
ording check against dontcare”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [record
[email protected]:2] Goto(“SIP/046260596-Affinity-0000000b”, “dontcare”) i
n new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (sub-record-
check,recordcheck,3)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [record
[email protected]:3] Return(“SIP/046260596-Affinity-0000000b”, “”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
sub-record-check:12] Return(“SIP/046260596-Affinity-0000000b”, “”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:9] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?macrodial”) in new s
tack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-exten
-vm,s,15)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:15] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?clrheader,1()”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:16] Macro(“SIP/046260596-Affinity-0000000b”, “dial-one,Ttr,1002”) i
n new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:1] Set(“SIP/046260596-Affinity-0000000b”, “DEXTEN=1002”) in new stac
k
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:2] Set(“SIP/046260596-Affinity-0000000b”, “DIALSTATUS_CW=”) in new s
tack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:3] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?screen,1()”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:4] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?cf,1()”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:5] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?skip1”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-dial-
one,s,8)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:8] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?nodial”) in new stac
k
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:9] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?continue”) in new st
ack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:10] Set(“SIP/046260596-Affinity-0000000b”, “EXTHASCW=ENABLED”) in ne
w stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:11] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?next1:cwinusebusy”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-dial-
one,s,23)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:23] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?next3:continue”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-dial-
one,s,24)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:24] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(DIALSTATUS_CW=B
USY)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:25] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?nodial”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:26] GosubIf(“SIP/046260596-Affinity-0000000b”, “1?dstring,1():dlocal
,1()”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:1] Set(“SIP/046260596-Affinity-0000000b”, “DSTRING=”) in new s
tack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:2] Set(“SIP/046260596-Affinity-0000000b”, “DEVICES=1002”) in n
ew stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:3] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Return()”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:4] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(DEVICES=00
2)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:5] Set(“SIP/046260596-Affinity-0000000b”, “LOOPCNT=1”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:6] Set(“SIP/046260596-Affinity-0000000b”, “ITER=1”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:7] Set(“SIP/046260596-Affinity-0000000b”, “THISDIAL=SIP/1002”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:8] GosubIf(“SIP/046260596-Affinity-0000000b”, “1?zap2dahdi,1()
”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:1] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Return()”) i
n new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:2] Set(“SIP/046260596-Affinity-0000000b”, “NEWDIAL=”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:3] Set(“SIP/046260596-Affinity-0000000b”, “LOOPCNT2=1”) in n
ew stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:4] Set(“SIP/046260596-Affinity-0000000b”, “ITER2=1”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:5] Set(“SIP/046260596-Affinity-0000000b”, “THISPART2=SIP/100
2”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:6] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(THISPART
2=DAHDI/1002)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:7] Set(“SIP/046260596-Affinity-0000000b”, “NEWDIAL=SIP/1002&
”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:8] Set(“SIP/046260596-Affinity-0000000b”, “ITER2=2”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:9] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?begin2”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:10] Set(“SIP/046260596-Affinity-0000000b”, “THISDIAL=SIP/100
2”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [zap2da
[email protected]:11] Return(“SIP/046260596-Affinity-0000000b”, “”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:9] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?doset”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-dial-
one,dstring,12)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:12] Set(“SIP/046260596-Affinity-0000000b”, “DSTRING=SIP/1002&”
) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:13] Set(“SIP/046260596-Affinity-0000000b”, “ITER=2”) in new st
ack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:14] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?begin”) in ne
w stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:15] Set(“SIP/046260596-Affinity-0000000b”, “DSTRING=SIP/1002”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [dstrin
[email protected]:16] Return(“SIP/046260596-Affinity-0000000b”, “”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:27] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?nodial”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:28] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?skiptrace”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:29] GosubIf(“SIP/046260596-Affinity-0000000b”, “1?ctset,1():ctclear,
1()”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
macro-dial-one:1] Set(“SIP/046260596-Affinity-0000000b”, “DB(CALLTRACE/1002)=07
07414888”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
macro-dial-one:2] Return(“SIP/046260596-Affinity-0000000b”, “”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:30] Set(“SIP/046260596-Affinity-0000000b”, “D_OPTIONS=Ttr”) in new s
tack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:31] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?SIPAddHeader(Alert-
Info: )”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:32] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?SIPAddHeader()”) in
new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:33] ExecIf(“SIP/046260596-Affinity-0000000b”, “1?Set(CHANNEL(musiccl
ass)=default)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:34] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?qwait,1()”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:35] Set(“SIP/046260596-Affinity-0000000b”, “__CWIGNORE=”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:36] Set(“SIP/046260596-Affinity-0000000b”, “__KEEPCID=TRUE”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:37] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?usegoto,1”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:38] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?godial”) in new sta
ck
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-dial-
one,s,43)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:43] Macro(“SIP/046260596-Affinity-0000000b”, “dialout-one-predial-ho
ok,”) in new stack
[2015-01-10 20:52:48] WARNING[31764][C-0000000b] app_macro.c: No such context ‘m
acro-dialout-one-predial-hook’ for macro ‘dialout-one-predial-hook’. Was called
by [email protected]
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:44] Dial(“SIP/046260596-Affinity-0000000b”, “SIP/1002,Ttr”) in new
stack
[2015-01-10 20:52:48] WARNING[31764][C-0000000b] app_dial.c: Unable to create ch
annel of type ‘SIP’ (cause 20 - Subscriber absent)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] app_dial.c: == Everyone is bu
sy/congested at this time (1:0/0/1)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:45] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?MacroExit()”) in ne
w stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:46] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(DIALSTATUS=)”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:47] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?s-CHANUNAVAIL,1()”
) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-dial-one:48] MacroExit(“SIP/046260596-Affinity-0000000b”, “”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:17] Set(“SIP/046260596-Affinity-0000000b”, “SV_DIALSTATUS=CHANUNAVAI
L”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:18] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?docfu,1()”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:19] GosubIf(“SIP/046260596-Affinity-0000000b”, “0?docfb,1()”) in new
stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:20] Set(“SIP/046260596-Affinity-0000000b”, “DIALSTATUS=CHANUNAVAIL”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:21] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?MacroExit()”) in ne
w stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-exten-vm:22] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?s-CHANUNAVAIL,1”) i
n new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-exten
-vm,s-CHANUNAVAIL,1)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [s-CHAN [email protected]:1] GotoIf(“SIP/046260596-Affinity-0000000b”, “0?exit,1”)
in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [s-CHAN [email protected]:2] PlayTones(“SIP/046260596-Affinity-0000000b”, “congest
ion”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [s-CHAN [email protected]:3] Congestion(“SIP/046260596-Affinity-0000000b”, “10”) i
n new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] app_macro.c: == Spawn extensi
on (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on ‘SIP/046260596-Affinit
y-0000000b’ in macro ‘exten-vm’
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: == Spawn extension (ex
t-local, 1002, 2) exited non-zero on ‘SIP/046260596-Affinity-0000000b’
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected]
local:1] Macro(“SIP/046260596-Affinity-0000000b”, “hangupcall,”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-hangupcall:1] GotoIf(“SIP/046260596-Affinity-0000000b”, “1?theend”) in new st
ack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Goto (macro-hangu
pcall,s,3)
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-hangupcall:3] ExecIf(“SIP/046260596-Affinity-0000000b”, “0?Set(CDR(recordingf
ile)=)”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: – Executing [[email protected] o-hangupcall:4] Hangup(“SIP/046260596-Affinity-0000000b”, “”) in new stack
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] app_macro.c: == Spawn extensi
on (macro-hangupcall, s, 4) exited non-zero on ‘SIP/046260596-Affinity-0000000b
’ in macro ‘hangupcall’
[2015-01-10 20:52:48] VERBOSE[31764][C-0000000b] pbx.c: == Spawn extension (ex
t-local, h, 1) exited non-zero on ‘SIP/046260596-Affinity-0000000b’

I’m not surprised considering:-

Maybe some time in the WIKI would help you get the basics working first.

Start off with

disallow=all
allow=alaw

for your trunk’s codec choices

Will do!

Thans for the help!

I’m curious, were are you located?

California, United States of America

It’s so nice to see nothing ever changes.

Still having fun Dicko?

hehe Scott, nobody reads anymore nobody listens anymore but Sangoma will fix all their problems (self induced or otherwise) if you follow their edicts. so nobody has to worry … la la la … :wink: oops that will cost me being banned again Im sure :slight_smile:

Yes, it’s going to be announced in Miami at IT Expo the next version of the distro includes digital synaptic images of TM1000 and GAMERGAMER imprinted on a multidimensional crystal media that has temporal flexibility technology in both forward and reverse. Once installed using the available Sangoma multidimensional crystal media reader the extra Cuda cores in your graphics processor, unused by PBX will begin to run synaptic algorithms. Not only constantly updating your PBX but automatically integrating your business processes. I can’t wait to see the alpha. I heard there were a few bugs in the extraction procedure and TM1000 is still drooling constantly and GAMERGAMER is speaking backwards in tongues but I have no doubt that these will be fixed in the next synaptic image reader that supports USB 3.0

Why don’t you come down to Miami and bask in the sun and we can all remind each other how smart we are.

I will correct that Scott. “how smart we were” :wink: they have a new stack and it works perfectly I am told, as does updating.

p.s. What bugs?

SkykingOH,

Forgive me if I’m not using this forum correctly, but I’m interested in speaking with you about the following post:
“Saving Pre-Recorded Voice Messages on Outbound Telemarketing Calls”
(I’m new so links are not allowed I guess)

We would like to do something similar and we are definitely open to a consulting arrangement to assist us.

I look forward to hearing from you.

–nick