Hello,
I have an issue with my installation.
When I tried to reach my SIP external number with my GSM, it’s ringing on my computer (SIP extension), it’s showing in the log that it’s ok. But when I tried to pickup the call, it directly hungup…
It’s the same if I try to call from 1 internal SIP extension to another internal SIP extension…
The log :
[2013-08-07 20:20:12] VERBOSE[1655] chan_sip.c: – Registered SIP ‘1002’ at 37.161.80.99:23329
[2013-08-07 20:20:13] VERBOSE[1655] chan_sip.c: – Unregistered SIP ‘1002’
[2013-08-07 20:20:14] VERBOSE[1655] chan_sip.c: – Registered SIP ‘1002’ at 37.161.80.99:23390
[2013-08-07 20:20:14] VERBOSE[1655][C-00000019] netsock2.c: == Using SIP RTP TOS bits 184
[2013-08-07 20:20:14] VERBOSE[1655][C-00000019] netsock2.c: == Using SIP RTP CoS mark 5
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [1001@from-internal:1] Set(“SIP/1002-0000002c”, “__RINGTIMER=15”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [1001@from-internal:2] Macro(“SIP/1002-0000002c”, “exten-vm,1001,1001,0,0,0”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:1] Macro(“SIP/1002-0000002c”, “user-callerid,”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/1002-0000002c”, “TOUCH_MONITOR=1375899614.44”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/1002-0000002c”, “AMPUSER=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/1002-0000002c”, “0?report”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/1002-0000002c”, “1?Set(REALCALLERIDNUM=1002)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/1002-0000002c”, “AMPUSER=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:6] Set(“SIP/1002-0000002c”, “AMPUSERCIDNAME=name”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:7] GotoIf(“SIP/1002-0000002c”, “0?report”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/1002-0000002c”, “AMPUSERCID=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/1002-0000002c”, “__DIAL_OPTIONS=Ttr”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/1002-0000002c”, “CALLERID(all)=“name” <1002>”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:11] GotoIf(“SIP/1002-0000002c”, “0?limit”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:12] ExecIf(“SIP/1002-0000002c”, “0?Set(GROUP(concurrency_limit)=1002)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:13] GotoIf(“SIP/1002-0000002c”, “0?continue”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:14] Set(“SIP/1002-0000002c”, “__TTL=64”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:15] GotoIf(“SIP/1002-0000002c”, “1?continue”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (macro-user-callerid,s,26)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/1002-0000002c”, “CALLERID(number)=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/1002-0000002c”, “CALLERID(name)=name”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:28] Set(“SIP/1002-0000002c”, “CDR(cnum)=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:29] Set(“SIP/1002-0000002c”, “CDR(cnam)=name”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/1002-0000002c”, “CHANNEL(language)=fr”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:2] Set(“SIP/1002-0000002c”, “RingGroupMethod=none”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:3] Set(“SIP/1002-0000002c”, “__EXTTOCALL=1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:4] Set(“SIP/1002-0000002c”, “__PICKUPMARK=1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:5] Set(“SIP/1002-0000002c”, “RT=15”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:6] ExecIf(“SIP/1002-0000002c”, “0?Macro(vm,1001,DIRECTDIAL,)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:7] ExecIf(“SIP/1002-0000002c”, “0?MacroExit()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:8] Gosub(“SIP/1002-0000002c”, “sub-record-check,s,1(exten,1001,)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/1002-0000002c”, “REC_POLICY_MODE_SAVE=”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/1002-0000002c”, “1?check”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (sub-record-check,s,7)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/1002-0000002c”, “__MON_FMT=wav”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/1002-0000002c”, “1?next”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (sub-record-check,s,11)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/1002-0000002c”, “0?Return()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/1002-0000002c”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/1002-0000002c”, “0?exten,1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/1002-0000002c”, “__REC_STATUS=INITIALIZED”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/1002-0000002c”, “NOW=1375899614”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/1002-0000002c”, “__DAY=07”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/1002-0000002c”, “__MONTH=08”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/1002-0000002c”, “__YEAR=2013”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/1002-0000002c”, “__TIMESTR=20130807-202014”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/1002-0000002c”, “__FROMEXTEN=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/1002-0000002c”, “__CALLFILENAME=exten-1001-1002-20130807-202014-1375899614.44”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/1002-0000002c”, “exten,1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (sub-record-check,exten,1)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [exten@sub-record-check:1] GotoIf(“SIP/1002-0000002c”, “0?callee”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [exten@sub-record-check:2] Set(“SIP/1002-0000002c”, “__REC_POLICY_MODE=dontcare”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [exten@sub-record-check:3] GotoIf(“SIP/1002-0000002c”, “1?caller”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (sub-record-check,exten,10)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [exten@sub-record-check:10] Set(“SIP/1002-0000002c”, “__REC_POLICY_MODE=dontcare”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [exten@sub-record-check:11] GosubIf(“SIP/1002-0000002c”, “0?record,1(exten,1001,1002)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [exten@sub-record-check:12] Return(“SIP/1002-0000002c”, “”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-exten-vm:9] Macro(“SIP/1002-0000002c”, “dial-one,15,Ttr,1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:1] Set(“SIP/1002-0000002c”, “DEXTEN=1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:2] Set(“SIP/1002-0000002c”, “DIALSTATUS_CW=”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:3] GosubIf(“SIP/1002-0000002c”, “0?screen,1()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:4] GosubIf(“SIP/1002-0000002c”, “0?cf,1()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:5] GotoIf(“SIP/1002-0000002c”, “1?skip1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (macro-dial-one,s,8)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:8] GotoIf(“SIP/1002-0000002c”, “0?nodial”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:9] GotoIf(“SIP/1002-0000002c”, “0?continue”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:10] Set(“SIP/1002-0000002c”, “EXTHASCW=ENABLED”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:11] GotoIf(“SIP/1002-0000002c”, “0?next1:cwinusebusy”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (macro-dial-one,s,23)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:23] GotoIf(“SIP/1002-0000002c”, “1?next3:continue”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Goto (macro-dial-one,s,24)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:24] ExecIf(“SIP/1002-0000002c”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:25] GotoIf(“SIP/1002-0000002c”, “0?nodial”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:26] GosubIf(“SIP/1002-0000002c”, “1?dstring,1():dlocal,1()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:1] Set(“SIP/1002-0000002c”, “DSTRING=”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:2] Set(“SIP/1002-0000002c”, “DEVICES=1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:3] ExecIf(“SIP/1002-0000002c”, “0?Return()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:4] ExecIf(“SIP/1002-0000002c”, “0?Set(DEVICES=001)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:5] Set(“SIP/1002-0000002c”, “LOOPCNT=1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:6] Set(“SIP/1002-0000002c”, “ITER=1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:7] Set(“SIP/1002-0000002c”, “THISDIAL=SIP/1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:8] GosubIf(“SIP/1002-0000002c”, “1?zap2dahdi,1()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/1002-0000002c”, “0?Return()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/1002-0000002c”, “NEWDIAL=”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/1002-0000002c”, “LOOPCNT2=1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/1002-0000002c”, “ITER2=1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/1002-0000002c”, “THISPART2=SIP/1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/1002-0000002c”, “0?Set(THISPART2=DAHDI/1001)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/1002-0000002c”, “NEWDIAL=SIP/1001&”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/1002-0000002c”, “ITER2=2”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/1002-0000002c”, “0?begin2”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/1002-0000002c”, “THISDIAL=SIP/1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/1002-0000002c”, “”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:9] Set(“SIP/1002-0000002c”, “DSTRING=SIP/1001&”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:10] Set(“SIP/1002-0000002c”, “ITER=2”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:11] GotoIf(“SIP/1002-0000002c”, “0?begin”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:12] Set(“SIP/1002-0000002c”, “DSTRING=SIP/1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [dstring@macro-dial-one:13] Return(“SIP/1002-0000002c”, “”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:27] GotoIf(“SIP/1002-0000002c”, “0?nodial”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:28] GotoIf(“SIP/1002-0000002c”, “0?skiptrace”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:29] GosubIf(“SIP/1002-0000002c”, “1?ctset,1():ctclear,1()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [ctset@macro-dial-one:1] Set(“SIP/1002-0000002c”, “DB(CALLTRACE/1001)=1002”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [ctset@macro-dial-one:2] Return(“SIP/1002-0000002c”, “”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:30] Set(“SIP/1002-0000002c”, “D_OPTIONS=Ttr”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:31] ExecIf(“SIP/1002-0000002c”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:32] ExecIf(“SIP/1002-0000002c”, “0?SIPAddHeader()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:33] ExecIf(“SIP/1002-0000002c”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:34] GosubIf(“SIP/1002-0000002c”, “0?qwait,1()”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:35] Set(“SIP/1002-0000002c”, “__CWIGNORE=”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:36] Set(“SIP/1002-0000002c”, “__KEEPCID=TRUE”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:37] GotoIf(“SIP/1002-0000002c”, “0?usegoto,1”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:38] GotoIf(“SIP/1002-0000002c”, “0?godial”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:39] Set(“SIP/1002-0000002c”, “CONNECTEDLINE(name,i)=name-name name”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:40] Set(“SIP/1002-0000002c”, “CONNECTEDLINE(num)=1001”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:41] Set(“SIP/1002-0000002c”, “D_OPTIONS=TtrI”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-dial-one:42] Dial(“SIP/1002-0000002c”, “SIP/1001,15,TtrI”) in new stack
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] netsock2.c: == Using SIP RTP TOS bits 184
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] netsock2.c: == Using SIP RTP CoS mark 5
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] app_dial.c: – Called SIP/1001
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] app_dial.c: – Connected line update to SIP/1002-0000002c prevented.
[2013-08-07 20:20:14] NOTICE[1655] chan_sip.c: Peer ‘1002’ is now Reachable. (292ms / 2000ms)
[2013-08-07 20:20:14] VERBOSE[2367][C-00000019] app_dial.c: – SIP/1001-0000002d is ringing
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] app_dial.c: – Connected line update to SIP/1002-0000002c prevented.
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] app_dial.c: – SIP/1001-0000002d answered SIP/1002-0000002c
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: – Executing [h@macro-dial-one:1] Macro(“SIP/1002-0000002c”, “hangupcall,”) in new stack
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-hangupcall:1] GotoIf(“SIP/1002-0000002c”, “1?theend”) in new stack
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: – Goto (macro-hangupcall,s,3)
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-hangupcall:3] ExecIf(“SIP/1002-0000002c”, “0?Set(CDR(recordingfile)=)”) in new stack
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: – Executing [s@macro-hangupcall:4] Hangup(“SIP/1002-0000002c”, “”) in new stack
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/1002-0000002c’ in macro ‘hangupcall’
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: == Spawn extension (macro-dial-one, h, 1) exited non-zero on ‘SIP/1002-0000002c’
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] app_macro.c: == Spawn extension (macro-dial-one, s, 42) exited non-zero on ‘SIP/1002-0000002c’ in macro ‘dial-one’
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] app_macro.c: == Spawn extension (macro-exten-vm, s, 9) exited non-zero on ‘SIP/1002-0000002c’ in macro ‘exten-vm’
[2013-08-07 20:20:18] VERBOSE[2367][C-00000019] pbx.c: == Spawn extension (from-internal, 1001, 2) exited non-zero on ‘SIP/1002-0000002c’
I’m using asteriskNow based on freepbx
Thanks for your help