At work we have an Allworx Sip 2.0 compliant PBX. This is really nice and allows us to all have softphones in addition to regular phones. I assume I should be able to register my softphone extension to my PBX In A Flash so that I can answer calls on my home system. I have successfully been able to register the trunk and I can even call it. However, I get no audio either direction. I wish I knew more about sip trunk settings. Any help would be appreciated. In my x-lite softphone I have to put in a stun server: stun.xten.com. Would I need to configure the stun server somewhere in my trunk? Here are my settings that register the trunk but I don’t get in audio:
Outgoing Settings:
Peer Details:
disallow=all
allow=ulaw&alaw
canreinvite=no
context=from-pstn
host=..**
secret=*********
insecure=port,invite
type=friend
username=******
Incoming Settings:
User Details:
disallow=all
allow=ulaw&alaw
canreinvite=no
context=from-pstn
host=..**
secret=*********
insecure=port,invite
type=friend
username=******