I am able to successfully register the device 6010 using my external url that points to my modem wh I am connected to the external network\Cellphone signal. but when I try to make a phone call from the device I get the error message below. If I switch and connect to my internal network I can make a call with no issues
[2019-02-05 19:52:36] ERROR[2362] netsock2.c: getaddrinfo(“2607:FB90:723C:DBA9:6932:B936:B58C:5BDC”, “9149”, …): Address family for hostname not supported
[2019-02-05 19:52:36] WARNING[2362] chan_sip.c: Could not resolve socket address for ‘[2607:FB90:723C:DBA9:6932:B936:B58C:5BDC]:9149’
[2019-02-05 19:52:36] ERROR[2362][C-0000049c] netsock2.c: getaddrinfo(“2607:FB90:723C:DBA9:6932:B936:B58C:5BDC”, “9149”, …): Address family for hostname not supported
[2019-02-05 19:52:36] WARNING[2362][C-0000049c] chan_sip.c: Could not resolve socket address for ‘[2607:FB90:723C:DBA9:6932:B936:B58C:5BDC]:9149’
[2019-02-05 19:52:36] ERROR[2362][C-0000049c] netsock2.c: getaddrinfo(“2607:FB90:723C:DBA9:6932:B936:B58C:5BDC”, “9149”, …): Address family for hostname not supported
[2019-02-05 19:52:36] WARNING[2362][C-0000049c] chan_sip.c: Could not resolve socket address for ‘[2607:FB90:723C:DBA9:6932:B936:B58C:5BDC]:9149’
[2019-02-05 19:52:36] VERBOSE[2362][C-0000049c] netsock2.c: Using SIP RTP TOS bits 184
[2019-02-05 19:52:36] VERBOSE[2362][C-0000049c] netsock2.c: Using SIP RTP CoS mark 5
[2019-02-05 19:52:36] WARNING[2362][C-0000049c] acl.c: Cannot connect to 2607:fb90:723c:dba9:6932:b936:b58c:5bdc: Network is unreachable
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [6000@from-internal:1] GotoIf(“SIP/6010-00000031”, “1?ext-local,6000,1:followme-check,6000,1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (ext-local,6000,1)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [6000@ext-local:1] Set(“SIP/6010-00000031”, “__RINGTIMER=15”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [6000@ext-local:2] Macro(“SIP/6010-00000031”, “exten-vm,novm,6000,0,0,0”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:1] Macro(“SIP/6010-00000031”, “user-callerid,”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:1] Set(“SIP/6010-00000031”, “TOUCH_MONITOR=1549421556.49”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:2] Set(“SIP/6010-00000031”, “AMPUSER=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:3] GotoIf(“SIP/6010-00000031”, “0?report”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:4] ExecIf(“SIP/6010-00000031”, “1?Set(REALCALLERIDNUM=6010)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:5] Set(“SIP/6010-00000031”, “AMPUSER=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:6] GotoIf(“SIP/6010-00000031”, “0?limit”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:7] Set(“SIP/6010-00000031”, “AMPUSERCIDNAME=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:8] ExecIf(“SIP/6010-00000031”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:9] GotoIf(“SIP/6010-00000031”, “0?report”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:10] Set(“SIP/6010-00000031”, “AMPUSERCID=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:11] Set(“SIP/6010-00000031”, “__DIAL_OPTIONS=Ttr”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:12] Set(“SIP/6010-00000031”, “CALLERID(all)=“6010” <6010>”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:13] GotoIf(“SIP/6010-00000031”, “0?limit”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:14] ExecIf(“SIP/6010-00000031”, “0?Set(GROUP(concurrency_limit)=6010)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:15] ExecIf(“SIP/6010-00000031”, “0?Set(CHANNEL(language)=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:16] NoOp(“SIP/6010-00000031”, “Macro Depth is 2”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:17] GotoIf(“SIP/6010-00000031”, “1?report2:macroerror”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-user-callerid,s,18)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:18] GotoIf(“SIP/6010-00000031”, “0?continue”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:19] ExecIf(“SIP/6010-00000031”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:20] Set(“SIP/6010-00000031”, “__TTL=64”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:21] GotoIf(“SIP/6010-00000031”, “1?continue”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-user-callerid,s,37)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:37] Set(“SIP/6010-00000031”, “CALLERID(number)=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:38] Set(“SIP/6010-00000031”, “CALLERID(name)=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:39] GotoIf(“SIP/6010-00000031”, “0?cnum”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:40] Set(“SIP/6010-00000031”, “CDR(cnam)=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:41] Set(“SIP/6010-00000031”, “CDR(cnum)=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-user-callerid:42] Set(“SIP/6010-00000031”, “CHANNEL(language)=en”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:2] Set(“SIP/6010-00000031”, “RingGroupMethod=none”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:3] Set(“SIP/6010-00000031”, “__EXTTOCALL=6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:4] Set(“SIP/6010-00000031”, “__PICKUPMARK=6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:5] Set(“SIP/6010-00000031”, “RT=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:6] ExecIf(“SIP/6010-00000031”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:7] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:8] ExecIf(“SIP/6010-00000031”, “0?Gosub(ext-intercom,*806000,1())”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:9] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:10] ExecIf(“SIP/6010-00000031”, “0?ChanSpy(SIP/6000,q)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:11] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:12] ExecIf(“SIP/6010-00000031”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:13] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:14] ExecIf(“SIP/6010-00000031”, “0?Gosub(ext-intercom,*806000,1())”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:15] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:16] ExecIf(“SIP/6010-00000031”, “0?ChanSpy(SIP/6000,q)”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:17] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] ERROR[1122][C-0000049c] pbx_functions.c: Function PJSIP_HEADER not registered
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:18] Gosub(“SIP/6010-00000031”, “sub-record-check,s,1(exten,6000,dontcare)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:1] GotoIf(“SIP/6010-00000031”, “0?initialized”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:2] Set(“SIP/6010-00000031”, “__REC_STATUS=INITIALIZED”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:3] Set(“SIP/6010-00000031”, “NOW=1549421556”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:4] Set(“SIP/6010-00000031”, “__DAY=05”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:5] Set(“SIP/6010-00000031”, “__MONTH=02”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:6] Set(“SIP/6010-00000031”, “__YEAR=2019”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:7] Set(“SIP/6010-00000031”, “__TIMESTR=20190205-195236”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:8] Set(“SIP/6010-00000031”, “__FROMEXTEN=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:9] Set(“SIP/6010-00000031”, “__MON_FMT=wav”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:10] NoOp(“SIP/6010-00000031”, “Recordings initialized”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:11] ExecIf(“SIP/6010-00000031”, “0?Set(ARG3=dontcare)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:12] Set(“SIP/6010-00000031”, “REC_POLICY_MODE_SAVE=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:13] ExecIf(“SIP/6010-00000031”, “0?Set(REC_STATUS=NO)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:14] GotoIf(“SIP/6010-00000031”, “5?checkaction”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (sub-record-check,s,17)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-record-check:17] GotoIf(“SIP/6010-00000031”, “1?sub-record-check,exten,1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:1] NoOp(“SIP/6010-00000031”, “Exten Recording Check between 6010 and 6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:2] Set(“SIP/6010-00000031”, “CALLTYPE=internal”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:3] ExecIf(“SIP/6010-00000031”, “0?Set(CALLTYPE=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:4] Set(“SIP/6010-00000031”, “CALLEE=dontcare”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:5] ExecIf(“SIP/6010-00000031”, “0?Set(CALLEE=dontcare)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:6] GotoIf(“SIP/6010-00000031”, “0?callee”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:7] GotoIf(“SIP/6010-00000031”, “1?caller”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (sub-record-check,exten,13)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:13] Set(“SIP/6010-00000031”, “RECMODE=dontcare”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:14] ExecIf(“SIP/6010-00000031”, “0?Set(RECMODE=dontcare)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:15] ExecIf(“SIP/6010-00000031”, “1?Set(RECMODE=dontcare)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:16] Gosub(“SIP/6010-00000031”, “recordcheck,1(dontcare,internal,6000)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“SIP/6010-00000031”, “Starting recording check against dontcare”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“SIP/6010-00000031”, “dontcare”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [exten@sub-record-check:17] Return(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:19] GotoIf(“SIP/6010-00000031”, “1?macrodial”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-exten-vm,s,25)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:25] GosubIf(“SIP/6010-00000031”, “0?clrheader,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:26] Macro(“SIP/6010-00000031”, “dial-one,Ttr,6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:1] Set(“SIP/6010-00000031”, “DEXTEN=6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:2] Set(“SIP/6010-00000031”, “__CRM_SOURCE=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:3] ExecIf(“SIP/6010-00000031”, “0?Set(__EXTTOCALL=6000)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:4] Set(“SIP/6010-00000031”, “DIALSTATUS_CW=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:5] GosubIf(“SIP/6010-00000031”, “0?screen,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:6] GosubIf(“SIP/6010-00000031”, “0?cf,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:7] GotoIf(“SIP/6010-00000031”, “1?skip1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-dial-one,s,10)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:10] GotoIf(“SIP/6010-00000031”, “0?nodial”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:11] GotoIf(“SIP/6010-00000031”, “0?continue”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:12] Set(“SIP/6010-00000031”, “EXTHASCW=ENABLED”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:13] GotoIf(“SIP/6010-00000031”, “0?next1:cwinusebusy”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-dial-one,s,25)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:25] GotoIf(“SIP/6010-00000031”, “0?next3:continue”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-dial-one,s,27)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:27] GotoIf(“SIP/6010-00000031”, “0?nodial”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:28] GosubIf(“SIP/6010-00000031”, “1?dstring,1():dlocal,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:1] Set(“SIP/6010-00000031”, “DSTRING=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:2] Set(“SIP/6010-00000031”, “DEVICES=6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:3] ExecIf(“SIP/6010-00000031”, “0?Return()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:4] ExecIf(“SIP/6010-00000031”, “0?Set(DEVICES=000)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:5] Set(“SIP/6010-00000031”, “LOOPCNT=1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:6] Set(“SIP/6010-00000031”, “ITER=1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:7] Set(“SIP/6010-00000031”, “THISDIAL=SIP/6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:8] GosubIf(“SIP/6010-00000031”, “1?zap2dahdi,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/6010-00000031”, “0?Return()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/6010-00000031”, “NEWDIAL=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/6010-00000031”, “LOOPCNT2=1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/6010-00000031”, “ITER2=1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/6010-00000031”, “THISPART2=SIP/6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/6010-00000031”, “0?Set(THISPART2=DAHDI/6000)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/6010-00000031”, “NEWDIAL=SIP/6000&”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/6010-00000031”, “ITER2=2”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/6010-00000031”, “0?begin2”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/6010-00000031”, “THISDIAL=SIP/6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:9] GotoIf(“SIP/6010-00000031”, “1?docheck”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-dial-one,dstring,14)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:14] GotoIf(“SIP/6010-00000031”, “0?skipset”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:15] Set(“SIP/6010-00000031”, “DSTRING=SIP/6000&”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:16] Set(“SIP/6010-00000031”, “ITER=2”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:17] GotoIf(“SIP/6010-00000031”, “0?begin”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:18] ExecIf(“SIP/6010-00000031”, “0?Return()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:19] Set(“SIP/6010-00000031”, “DSTRING=SIP/6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [dstring@macro-dial-one:20] Return(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:29] GotoIf(“SIP/6010-00000031”, “0?nodial”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:30] GotoIf(“SIP/6010-00000031”, “0?skiptrace”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:31] GosubIf(“SIP/6010-00000031”, “1?ctset,1():ctclear,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [ctset@macro-dial-one:1] Set(“SIP/6010-00000031”, “DB(CALLTRACE/6000)=6010”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [ctset@macro-dial-one:2] Return(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:32] Set(“SIP/6010-00000031”, “D_OPTIONS=Ttr”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:33] GosubIf(“SIP/6010-00000031”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:34] NoOp(“SIP/6010-00000031”, "Blind Transfer: , Attended Transfer: , User: 6010, Alert Info: ") in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:35] ExecIf(“SIP/6010-00000031”, “1?Set(ALERT_INFO=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:36] ExecIf(“SIP/6010-00000031”, “0?Set(ALERT_INFO=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:37] ExecIf(“SIP/6010-00000031”, “0?Set(ALERT_INFO=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:38] ExecIf(“SIP/6010-00000031”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:39] ExecIf(“SIP/6010-00000031”, “0?Set(ALERT_INFO=Normal;volume=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:40] GosubIf(“SIP/6010-00000031”, “0?func-set-sipheader,s,1(Alert-Info,)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:41] ExecIf(“SIP/6010-00000031”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:42] GosubIf(“SIP/6010-00000031”, “0?qwait,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:43] Set(“SIP/6010-00000031”, “__CWIGNORE=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:44] Set(“SIP/6010-00000031”, “__KEEPCID=TRUE”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:45] GotoIf(“SIP/6010-00000031”, “0?usegoto,1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:46] GotoIf(“SIP/6010-00000031”, “0?godial”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:47] Gosub(“SIP/6010-00000031”, “sub-presencestate-display,s,1(6000)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@sub-presencestate-display:1] Goto(“SIP/6010-00000031”, “state-not_set,1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (sub-presencestate-display,state-not_set,1)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [state-not_set@sub-presencestate-display:1] Set(“SIP/6010-00000031”, “PRESENCESTATE_DISPLAY=”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [state-not_set@sub-presencestate-display:2] Return(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:48] Set(“SIP/6010-00000031”, “CONNECTEDLINE(name,i)=Allyson Pena”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:49] Set(“SIP/6010-00000031”, “CONNECTEDLINE(num)=6000”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:50] Set(“SIP/6010-00000031”, “D_OPTIONS=TtrI”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:51] Macro(“SIP/6010-00000031”, “dialout-one-predial-hook,”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:52] ExecIf(“SIP/6010-00000031”, “0?Set(D_OPTIONS=trII)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:53] NoOp(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:54] ExecIf(“SIP/6010-00000031”, “0?Set(D_OPTIONS=TtrIg)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:55] Dial(“SIP/6010-00000031”, “SIP/6000,TtrIb(func-apply-sipheaders^s^1)”) in new stack
[2019-02-05 19:52:36] WARNING[1122][C-0000049c] app_dial.c: Unable to create channel of type ‘SIP’ (cause 20 - Subscriber absent)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:56] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:57] ExecIf(“SIP/6010-00000031”, “0?Set(DIALSTATUS=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:58] GosubIf(“SIP/6010-00000031”, “0?s-CHANUNAVAIL,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-dial-one:59] MacroExit(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:27] Set(“SIP/6010-00000031”, “SV_DIALSTATUS=CHANUNAVAIL”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:28] GosubIf(“SIP/6010-00000031”, “0?docfu,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:29] GosubIf(“SIP/6010-00000031”, “0?docfb,1()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:30] Set(“SIP/6010-00000031”, “DIALSTATUS=CHANUNAVAIL”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:31] ExecIf(“SIP/6010-00000031”, “0?MacroExit()”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-exten-vm:32] GotoIf(“SIP/6010-00000031”, “1?s-CHANUNAVAIL,1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-exten-vm,s-CHANUNAVAIL,1)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf(“SIP/6010-00000031”, “0?exit,1”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones(“SIP/6010-00000031”, “congestion”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion(“SIP/6010-00000031”, “10”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] app_macro.c: Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on ‘SIP/6010-00000031’ in macro ‘exten-vm’
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Spawn extension (ext-local, 6000, 2) exited non-zero on ‘SIP/6010-00000031’
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [h@ext-local:1] Macro(“SIP/6010-00000031”, “hangupcall,”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“SIP/6010-00000031”, “1?theend”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“SIP/6010-00000031”, “0?Set(CDR(recordingfile)=)”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Executing [s@macro-hangupcall:4] Hangup(“SIP/6010-00000031”, “”) in new stack
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] app_macro.c: Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/6010-00000031’ in macro ‘hangupcall’
[2019-02-05 19:52:36] VERBOSE[1122][C-0000049c] pbx.c: Spawn extension (ext-local, h, 1) exited non-zero on ‘SIP/6010-00000031’