Genzaptelconf (and /usr/local/sbin scripts missing)

General Help
1

OK, forgive me if this is something obvious - I followed Preston Moore’s instructions for installation on Clark Connect 4.0 Enterprise.

I have a previous setup which was out the box AAH, in a miniITX system, so I found the scripts theree

Anyway to cut a long story short, none of the scripts that should be in /usr/local/sbin seem to be there

genzaptelconf (I need this as I have a Digium TDP400 card)
passwd-maint
.
.
etc.

I basically followed his guide exepct for putting normal zaptel rather than ztdummy, based on samyoun scripts.

Any ideas what I did wrong. Has something moved.

Cheers

Rajiv

2

OK I have no idea about the Install on CC
if you just want the scripts…
http://pbx.mississippi.com/scripts.tar

3

:smiley: Thanks bubba! Grabbed genzatel and another scripot it depends on and voila we have a working freePBX on CC4.0 with Digium Cards Sip Phones, IAX2 phones, PSTN over IAX2, PSTN via Digium, Multi-WAN using 2 ISPs - what more could a person want!

4

Kewl…

5

On 09/10/2006, at 11:09 PM, rdhir wrote:

[quote] Anyway to cut a long story short, none of the scripts that should
be in /usr/local/sbin seem to be there
[/quote]
Those are not FreePBX scripts. Those are AAH/TrixBox scripts.

–
National Manager - Special Projects

< Sydney / Melbourne / Canberra / Hobart / London />
2/340 Gore Street T: +61 (0) 3 9235 5400
Fitzroy, VIC F: +61 (0) 3 9235 5444
3065 W: http://www.squiz.net

… > > Open Source - Own It - Squiz.net … />

Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net’s Techsay panel and you’ll get the chance to share your
opinions on IT & business topics through brief surveys – and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Amportal-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amportal-users

Post generated using Mail2Forum (http://www.mail2forum.com)