Hey all,
I am running FreePBX 3.211.63-10 with all current module updates up to date.
I have recently installed the g729 codec to the system and all works really well. I went to use a page group i have setup and noticed that audio only came out of the Yealink Phone not either of the SNOMs I have setup here.
I can intercom by dialing *80 no problem but when i try and use the paging group 400 i get the below errors.
[2014-03-13 12:19:44] WARNING[1224][C-000009bc]: translate.c:443 ast_translator_build_path: No translator path from g729 to slin
This error just keeps scrolling through the CLI.
When i run core show codecs, i get the below
Disclaimer: this command is for informational purposes only.
It does not indicate anything about your configuration.
ID TYPE NAME DESCRIPTION
It does not indicate anything about your configuration.
ID TYPE NAME DESCRIPTION
100001 audio g723 (G.723.1)
100002 audio gsm (GSM)
100003 audio ulaw (G.711 u-law)
100004 audio alaw (G.711 A-law)
100011 audio g726 (G.726 RFC3551)
100006 audio adpcm (ADPCM)
100019 audio slin (16 bit Signed Linear PCM)
100007 audio lpc10 (LPC10)
100008 audio g729 (G.729A)
100009 audio speex (SpeeX)
100016 audio speex16 (SpeeX 16khz)
100010 audio ilbc (iLBC)
100005 audio g726aal2 (G.726 AAL2)
100012 audio g722 (G722)
100021 audio slin16 (16 bit Signed Linear PCM (16kHz))
300001 image jpeg (JPEG image)
300002 image png (PNG image)
200001 video h261 (H.261 Video)
200002 video h263 (H.263 Video)
200003 video h263p (H.263+ Video)
200004 video h264 (H.264 Video)
200005 video mpeg4 (MPEG4 Video)
400001 text red (T.140 Realtime Text with redundancy)
400002 text t140 (Passthrough T.140 Realtime Text)
100013 audio siren7 (ITU G.722.1 (Siren7, licensed from Polycom))
100014 audio siren14 (ITU G.722.1 Annex C, (Siren14, licensed from Polycom))
100017 audio testlaw (G.711 test-law)
100015 audio g719 (ITU G.719)
100028 audio speex32 (SpeeX 32khz)
100020 audio slin12 (16 bit Signed Linear PCM (12kHz))
100022 audio slin24 (16 bit Signed Linear PCM (24kHz))
100023 audio slin32 (16 bit Signed Linear PCM (32kHz))
100024 audio slin44 (16 bit Signed Linear PCM (44kHz))
100025 audio slin48 (16 bit Signed Linear PCM (48kHz))
100026 audio slin96 (16 bit Signed Linear PCM (96kHz))
100027 audio slin192 (16 bit Signed Linear PCM (192kHz))
and running core show translation gives me
Translation times between formats (in microseconds) for one second of data
Source Format (Rows) Destination Format (Columns)
gsm ulaw alaw g726 adpcm slin lpc10 g729 ilbc g726aal2 g722 slin16 testlaw
gsm - 15000 15000 15000 15000 9000 15000 15000 15000 15000 17250 26250 15000
ulaw 15000 - 9150 15000 15000 9000 15000 15000 15000 15000 17250 26250 15000
alaw 15000 9150 - 15000 15000 9000 15000 15000 15000 15000 17250 26250 15000
g726 15000 15000 15000 - 15000 9000 15000 15000 15000 15000 17250 26250 15000
adpcm 15000 15000 15000 15000 - 9000 15000 15000 15000 15000 17250 26250 15000
slin 6000 6000 6000 6000 6000 - 6000 6000 6000 6000 8250 17250 6000
lpc10 15000 15000 15000 15000 15000 9000 - 15000 15000 15000 17250 26250 15000
g729 15000 15000 15000 15000 15000 9000 15000 - 15000 15000 17250 26250 15000
ilbc 15000 15000 15000 15000 15000 9000 15000 15000 - 15000 17250 26250 15000
g726aal2 15000 15000 15000 15000 15000 9000 15000 15000 15000 - 17250 26250 15000
g722 15600 15600 15600 15600 15600 9600 15600 15600 15600 15600 - 9000 15600
slin16 21600 21600 21600 21600 21600 15600 21600 21600 21600 21600 6000 - 21600
testlaw 15000 15000 15000 15000 15000 9000 15000 15000 15000 15000 17250 26250 -
(sorry i don;t knwo how to make the margin wider to be able to see that table properly)
Any advice would be really appreciated. Let me know if you need further info.
Cheers.