FreePBX 17 all call's hangup after 32 seconds

General Help
21

For information for everyone who will have a similar problem, I am sending info from a colleague who solved it.
"Regarding the trunk, after much searching, adding:

TRUNKS [TrunkA] :: Edit PJSIP Trunk → Advanced → Contact User: asterisk

words ‘asterisk’, which previous versions did themselves. I don’t know, it’s so stupid. :slightly_smiling_face:

With the FreePBX16, I would assume that you still have trunks defined on chan_sip, because there the double combination chan_sip|pjsip was still possible."…
So thank you public smart heads and good luck with FreePBX. Peter

p.s. The AI ​​was wrong.

22

But in the OP’s case, the Contact header in the 200 OK response already has a non-null user part, so it’s very unlikely that this is his problem.

23

I had a similar issue, though it might just be a coincidence when the equipment was changed, yours might be due for a replacement, but try looking into the backend of your router/modem (so like going to 192.168.0.1 (or 1.1 if you have a separate modem) and looking at the configuration) and see if there might be something that might point to issues? Alas, that’s about where my usefulness for that portion of assistance comes to an end, the only reason mine worked is because of an equipment swap from my ISP, which again, could just be a coincidence