Force CPU

Hi,

I’m trying to install FreePBX on a Frankenstein machine. First two attempts seemed to go okay, but asterisk would always stop with Illegal instruction error.

Trying to manually start asterisk, I would get the follow error:
Asterisk ended with exit status 132
Asterisk exited on signal 4.

Researching this leads me to believe that the OS Install is not identifying the CPU correctly.

From what I’ve been able to determine from the motherboard, the CPU should be an AMD Athlon XP/Athlon/Duron.

cpuinfo gives me this:
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : Unknown CPU Typ
stepping : 0
cpu MHz : 2305.339
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow up
bogomips : 4610.67
clflush size : 32
cache_alignment : 32
address sizes : 34 bits physical, 32 bits virtual
power management: ts fid vid

Is there anyway I can force a CPU type during install instead of relying on anaconda determining the CPU type?

Thanks,
Westley