Follow me Problem

Dear all,

I have freepbx and set follow me so that calls are forwarded to mobile numbers, however am experiencing a problem that when i add five mobile numbers, call cant be forwarded, it instead repeats ivr on selecting option ie when i press 3, when i leave for numbers in follow me, it work. I intend to have more than four mobile numbers to be forwarded to under follow me. Please help.

Below are the logs;

[2014-02-21 18:53:35] VERBOSE[8342] loader.c: – Reloading module ‘res_phoneprov.so’ (HTTP Phone Provisioning)
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_general_additional.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_general_custom.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_nat.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_registrations_custom.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_registrations.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_custom.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/additional_a2billing_sip.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_additional.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/sip_custom_post.conf’: Found
[2014-02-21 18:53:35] WARNING[8342] res_phoneprov.c: Unable to load users.conf
[2014-02-21 18:53:35] VERBOSE[8342] loader.c: – Reloading module ‘res_rtp_asterisk.so’ (Asterisk RTP Stack)
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/rtp.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/rtp_additional.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] config.c: == Parsing ‘/etc/asterisk/rtp_custom.conf’: Found
[2014-02-21 18:53:35] VERBOSE[8342] res_rtp_asterisk.c: == RTP Allocating from port range 10000 -> 20000
[2014-02-21 18:53:44] VERBOSE[1998][C-0000000f] sig_pri.c: – Accepting call from ‘0781308235’ to ‘902900800’ on channel 0/6, span 1
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/0781308235-2c”, “__FROM_DID=902900800”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Gosub(“DAHDI/i1/0781308235-2c”, “app-blacklist-check,s,1()”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/0781308235-2c”, “0?blacklisted”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/0781308235-2c”, “CALLED_BLACKLIST=1”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] Return(“DAHDI/i1/0781308235-2c”, “”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/0781308235-2c”, “CDR(did)=902900800”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:4] ExecIf(“DAHDI/i1/0781308235-2c”, “1 ?Set(CALLERID(name)=0781308235)”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/0781308235-2c”, “__CALLINGPRES_SV=allowed”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/0781308235-2c”, “CALLERPRES()=allowed_not_screened”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] Goto(“DAHDI/i1/0781308235-2c”, “ivr-7,s,1”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Goto (ivr-7,s,1)
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/0781308235-2c”, “TIMEOUT_LOOPCOUNT=0”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/0781308235-2c”, “INVALID_LOOPCOUNT=0”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/0781308235-2c”, “_IVR_CONTEXT_ivr-7=”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/0781308235-2c”, “_IVR_CONTEXT=ivr-7”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/0781308235-2c”, “__IVR_RETVM=”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:6] GotoIf(“DAHDI/i1/0781308235-2c”, “0?skip”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] Answer(“DAHDI/i1/0781308235-2c”, “”) in new stack
[2014-02-21 18:53:44] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:8] Wait(“DAHDI/i1/0781308235-2c”, “1”) in new stack
[2014-02-21 18:53:45] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:9] Set(“DAHDI/i1/0781308235-2c”, “IVR_MSG=custom/DrWelcome”) in new stack
[2014-02-21 18:53:45] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/0781308235-2c”, “TIMEOUT(digit)=3”) in new stack
[2014-02-21 18:53:45] VERBOSE[8371][C-0000000f] func_timeout.c: – Digit timeout set to 3.000
[2014-02-21 18:53:45] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:11] ExecIf(“DAHDI/i1/0781308235-2c”, “1?Background(custom/DrWelcome)”) in new stack
[2014-02-21 18:53:45] WARNING[8371][C-0000000f] format_wav.c: Not in mono 2
[2014-02-21 18:53:45] WARNING[8371][C-0000000f] file.c: Unable to open format wav
[2014-02-21 18:53:45] WARNING[8371][C-0000000f] mp3/interface.c: Junk at the beginning of frame 49443304
[2014-02-21 18:53:45] VERBOSE[8371][C-0000000f] file.c: – <DAHDI/i1/0781308235-2c> Playing ‘custom/DrWelcome.slin’ (language ‘en’)
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Goto(“DAHDI/i1/0781308235-2c”, “ivr-6,s,1”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Goto (ivr-6,s,1)
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/0781308235-2c”, “TIMEOUT_LOOPCOUNT=0”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/0781308235-2c”, “INVALID_LOOPCOUNT=0”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/0781308235-2c”, “_IVR_CONTEXT_ivr-6=ivr-7”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/0781308235-2c”, “_IVR_CONTEXT=ivr-6”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/0781308235-2c”, “__IVR_RETVM=”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:6] GotoIf(“DAHDI/i1/0781308235-2c”, “1?skip”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Goto (ivr-6,s,9)
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:9] Set(“DAHDI/i1/0781308235-2c”, “IVR_MSG=custom/HelloPress”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/0781308235-2c”, “TIMEOUT(digit)=3”) in new stack
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] func_timeout.c: – Digit timeout set to 3.000
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:11] ExecIf(“DAHDI/i1/0781308235-2c”, “1?Background(custom/HelloPress)”) in new stack
[2014-02-21 18:53:48] WARNING[8371][C-0000000f] mp3/interface.c: Junk at the beginning of frame 49443304
[2014-02-21 18:53:48] VERBOSE[8371][C-0000000f] file.c: – <DAHDI/i1/0781308235-2c> Playing ‘custom/HelloPress.slin’ (language ‘en’)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Goto(“DAHDI/i1/0781308235-2c”, “from-did-direct,8003,1”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (from-did-direct,8003,1)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/0781308235-2c”, “0?ext-local,8003,1”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Macro(“DAHDI/i1/0781308235-2c”, “user-callerid,”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/0781308235-2c”, “TOUCH_MONITOR=1392998024.169”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/0781308235-2c”, “AMPUSER=0781308235”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] GotoIf(“DAHDI/i1/0781308235-2c”, “0?report”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:4] ExecIf(“DAHDI/i1/0781308235-2c”, “1?Set(REALCALLERIDNUM=0781308235)”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/0781308235-2c”, “AMPUSER=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/0781308235-2c”, “AMPUSERCIDNAME=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] GotoIf(“DAHDI/i1/0781308235-2c”, “1?report”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (macro-user-callerid,s,15)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:15] GotoIf(“DAHDI/i1/0781308235-2c”, “0?continue”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:16] Set(“DAHDI/i1/0781308235-2c”, “__TTL=64”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:17] GotoIf(“DAHDI/i1/0781308235-2c”, “1?continue”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (macro-user-callerid,s,28)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:28] Set(“DAHDI/i1/0781308235-2c”, “CALLERID(number)=0781308235”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:29] Set(“DAHDI/i1/0781308235-2c”, “CALLERID(name)=0781308235”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:30] Set(“DAHDI/i1/0781308235-2c”, “CDR(cnum)=0781308235”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:31] Set(“DAHDI/i1/0781308235-2c”, “CDR(cnam)=0781308235”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:32] Set(“DAHDI/i1/0781308235-2c”, “CHANNEL(language)=en”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/0781308235-2c”, “DIAL_OPTIONS=TtrI”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/0781308235-2c”, “CONNECTEDLINE(num)=8003”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/0781308235-2c”, “CONNECTEDLINE(name,i)=Otherz”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/0781308235-2c”, “FM_DIALSTATUS=UNAVAILABLE”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/0781308235-2c”, “__EXTTOCALL=8003”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:8] Set(“DAHDI/i1/0781308235-2c”, “__PICKUPMARK=8003”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:9] Macro(“DAHDI/i1/0781308235-2c”, “blkvm-setifempty,”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/0781308235-2c”, “1?init”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (macro-blkvm-setifempty,s,4)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/0781308235-2c”, “__BLKVM_CHANNEL=DAHDI/i1/0781308235-2c”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/0781308235-2c”, “SHARED(BLKVM,DAHDI/i1/0781308235-2c)=TRUE”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/0781308235-2c”, “GOSUB_RETVAL=TRUE”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] MacroExit(“DAHDI/i1/0781308235-2c”, “”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:10] GotoIf(“DAHDI/i1/0781308235-2c”, “1?skipov”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (from-did-direct,8003,13)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:13] Set(“DAHDI/i1/0781308235-2c”, “RRNODEST=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:14] Set(“DAHDI/i1/0781308235-2c”, “__NODEST=8003”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:15] GosubIf(“DAHDI/i1/0781308235-2c”, “0?sub-fmsetcid,s,1()”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:16] Set(“DAHDI/i1/0781308235-2c”, “RecordMethod=Group”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:17] Gosub(“DAHDI/i1/0781308235-2c”, “sub-record-check,s,1(exten,8003,)”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/0781308235-2c”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] GotoIf(“DAHDI/i1/0781308235-2c”, “1?check”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (sub-record-check,s,7)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/0781308235-2c”, “__MON_FMT=wav”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:8] GotoIf(“DAHDI/i1/0781308235-2c”, “1?next”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (sub-record-check,s,11)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:11] ExecIf(“DAHDI/i1/0781308235-2c”, “0?Return()”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:12] ExecIf(“DAHDI/i1/0781308235-2c”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:13] GotoIf(“DAHDI/i1/0781308235-2c”, “0?exten,1”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:14] Set(“DAHDI/i1/0781308235-2c”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:15] Set(“DAHDI/i1/0781308235-2c”, “NOW=1392998030”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:16] Set(“DAHDI/i1/0781308235-2c”, “__DAY=21”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:17] Set(“DAHDI/i1/0781308235-2c”, “__MONTH=02”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:18] Set(“DAHDI/i1/0781308235-2c”, “__YEAR=2014”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:19] Set(“DAHDI/i1/0781308235-2c”, “__TIMESTR=20140221-185350”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:20] Set(“DAHDI/i1/0781308235-2c”, “__FROMEXTEN=0781308235”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:21] Set(“DAHDI/i1/0781308235-2c”, “__CALLFILENAME=exten-8003-0781308235-20140221-185350-1392998024.169”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:22] Goto(“DAHDI/i1/0781308235-2c”, “exten,1”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (sub-record-check,exten,1)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/0781308235-2c”, “0?callee”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/0781308235-2c”, “__REC_POLICY_MODE=dontcare”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] GotoIf(“DAHDI/i1/0781308235-2c”, “1?caller”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (sub-record-check,exten,10)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/0781308235-2c”, “__REC_POLICY_MODE=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:11] GosubIf(“DAHDI/i1/0781308235-2c”, “0?record,1(exten,8003,0781308235)”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:12] Return(“DAHDI/i1/0781308235-2c”, “”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:18] Set(“DAHDI/i1/0781308235-2c”, “RingGroupMethod=ringallv2”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:19] Set(“DAHDI/i1/0781308235-2c”, “_FMGRP=8003”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:20] GotoIf(“DAHDI/i1/0781308235-2c”, “0?doconfirm”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:21] Macro(“DAHDI/i1/0781308235-2c”, “dial,20,TtrI,8003-90774123217#-90772845512#-90782314040#-90782861625#-90774637087#”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/0781308235-2c”, “1?dial”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Goto (macro-dial,s,3)
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:3] AGI(“DAHDI/i1/0781308235-2c”, “dialparties.agi”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: dialparties.agi: Caller ID name is ‘0781308235’ number is ‘0781308235’
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: dialparties.agi: Methodology of ring is ‘ringallv2’
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Added extension 8003 to extension map
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Added extension 90774123217# to extension map
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Added extension 90772845512# to extension map
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Added extension 90782314040# to extension map
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Added extension 90782861625# to extension map
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Added extension 90774637087# to extension map
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 8003 cf is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 90774123217# cf is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 90772845512# cf is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 90782314040# cf is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 90782861625# cf is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 90774637087# cf is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Extension 8003 do not disturb is disabled
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: dbset CALLTRACE/8003 to 0781308235
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – dialparties.agi: Filtered ARG3: 8003-90774123217-90772845512-90782314040-90782861625-90774637087
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] res_agi.c: – <DAHDI/i1/0781308235-2c>AGI Script dialparties.agi completed, returning 0
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] pbx.c: – Executing [[email protected]:7] Dial(“DAHDI/i1/0781308235-2c”, “Local/[email protected]&Local/FMGL-90774123217#-90772845512#-90782314040#-90782861625#-90774637087#@from-internal,22,TtrIM(auto-blkvm)”) in new stack
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] app_dial.c: – Called Local/[email protected]
[2014-02-21 18:53:50] NOTICE[8371][C-0000000f] chan_local.c: No such extension/context FMGL-90774123217#-90772845512#-90782314040#-90782861625#-90774637087#@from-inte while calling Local channel
[2014-02-21 18:53:50] VERBOSE[8371][C-0000000f] app_dial.c: – Couldn’t call Local/FMGL-90774123217#-90772845512#-90782314040#-90782861625#-90774637087#@from-internal
[2014-02-21 18:53:50] WARNING[1958] chan_local.c: Someone used Local/FMGL-90774123217#-90772845512#-90782314040#-90782861625# somewhere without a @context. This is bad.
[2014-02-21 18:53:50] WARNING[1958] chan_local.c: Someone used Local/FMGL-90774123217#-90772845512#-90782314040#-90782861625# somewhere without a @context. This is bad.
[2014-02-21 18:53:50] VERBOSE[8373][C-0000000f] pbx.c: – Executing [[email protected]:1] NoCDR(“Local/[email protected];2”, “”) in new stack
[2014-02-21 18:53:50] VERBOSE[8373][C-0000000f] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];2”, “RingGroupMethod=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8373][C-0000000f] pbx.c: – Executing [[email protected]:3] Set(“Local/[email protected];2”, “USE_CONFIRMATION=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8373][C-0000000f] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “RINGGROUP_INDEX=”) in new stack
[2014-02-21 18:53:50] VERBOSE[8373][C-0000000f] pbx.c: – Executing [[email protected]:5] Macro(“Local/[email protected];2”, “simple-dial,8003,22”) in new stack
[2014-02-21 18:53:50] VERBOSE[8373][C-0000000f] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “__EXTTOCALL=8003”) in new

How do you have your ring strategy set, and how many trunks do you have?

I have 3 trunks and using ringallv2 but when i changed to ringall it worked, thought ringallv2 would be the latest and wouldnt have a problem.

Regards