I am having an issue and sure the matter is a basic error in my part.
Installed the pbx PBX Firmware: 5.211.65-11 PBX Service Pack: 1.0.0.0
I have added the FAX over PBX, Installed the Fax pro and able to receive Fax (inbound)
When I am trying to SEND a fax, I am not able to successfully send. I have tried to send to a Fax (analog) machine and ringing - but no answer.
User Portal Status: The call dropped prematurely
The logs are showing me the following:
[2014-09-25 02:51:44] VERBOSE[5191][C-0000011c] pbx.c: – Executing [s@send-fax:3] SendFAX(“SIP/fpbx-1-****** c”, “/var/spool/asterisk/tmp/fax-1411631414706.tif,zf”) in new stack
[2014-09-25 02:51:44] VERBOSE[5191][C-0000011c] res_fax.c: – Channel ‘SIP/fpbx-fpbx-1-****** c’ sending FAX:
[2014-09-25 02:51:44] VERBOSE[5191][C-0000011c] res_fax.c: – /var/spool/asterisk/tmp/fax-1411631414706.tif
[2014-09-25 02:51:49] WARNING[1626][C-0000011c] chan_sip.c: Failed to initialize UDPTL, declining image stream
[2014-09-25 02:51:49] WARNING[1626][C-0000011c] chan_sip.c: Failing due to no acceptable offer found
The issue is that the call is going thru the system - as I was able to test to my local phone and rings and I am receiving the “ring” and answer to a FAX TONE.
Is there something I am missing? Please any help is greatly appreciated.
**Just FYI - I am not a FILL-TIME Phone admin, I work in a Helpdesk and the FreePBX is a new duty I am trying to take on. I am sure that I am doing something wrong.
Last - is there a way to enable Outbound faxing? As I am seeing the option in the EXTENTION and is enabled - Outbound Route for Faxing is configured and tested the DialPlan - I am sure something small?
Thanks in advance for anyhelp - again 