I have two external soft phones that cannot call each other. I have been looking at the logs and all over the internet, but I have no idea what the logs are trying to tell me. Can someone please help
I have attached the log message
Thank you very much…
[2011-11-23 11:44:31] VERBOSE[3062] chan_sip.c: – Registered SIP ‘4052’ at 50.129.188.125:36444
[2011-11-23 11:44:31] NOTICE[3062] chan_sip.c: Peer ‘4052’ is now Reachable. (6ms / 2000ms)
[2011-11-23 11:44:35] VERBOSE[3062] netsock2.c: == Using SIP RTP TOS bits 184
[2011-11-23 11:44:35] VERBOSE[3062] netsock2.c: == Using SIP RTP CoS mark 5
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [4052@from-internal:1] ExecIf(“SIP/4051-0000003b”, “0?Set(__RINGTIMER=0)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [4052@from-internal:2] Macro(“SIP/4051-0000003b”, “exten-vm,novm,4052,0,0,0”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:1] Macro(“SIP/4051-0000003b”, “user-callerid,”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/4051-0000003b”, “AMPUSER=4051”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:2] GotoIf(“SIP/4051-0000003b”, “0?report”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:3] ExecIf(“SIP/4051-0000003b”, “1?Set(REALCALLERIDNUM=4051)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:4] Set(“SIP/4051-0000003b”, “AMPUSER=4051”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/4051-0000003b”, “AMPUSERCIDNAME=Dylan”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/4051-0000003b”, “0?report”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/4051-0000003b”, “AMPUSERCID=4051”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/4051-0000003b”, “CALLERID(all)=“Dylan” <4051>”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:9] GotoIf(“SIP/4051-0000003b”, “0?limit”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:10] ExecIf(“SIP/4051-0000003b”, “0?Set(GROUP(concurrency_limit)=4051)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:11] GosubIf(“SIP/4051-0000003b”, “7?sub-ccss,s,1(macro-exten-vm,4052)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/4051-0000003b”, “0?Return()”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/4051-0000003b”, “CCSS_SETUP=TRUE”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/4051-0000003b”, “7?monitor_config,1(macro-exten-vm,4052):monitor_default,1(macro-exten-vm,4052)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [monitor_config@sub-ccss:1] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(cc_monitor_policy)=generic”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [monitor_config@sub-ccss:2] GotoIf(“SIP/4051-0000003b”, “1?set_monitor”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (sub-ccss,monitor_config,5)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [monitor_config@sub-ccss:5] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(cc_max_monitors)=”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [monitor_config@sub-ccss:6] Return(“SIP/4051-0000003b”, “TRUE”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@sub-ccss:4] GosubIf(“SIP/4051-0000003b”, “7?agent_config,1:agent_default,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:1] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(cc_agent_policy)=generic”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:2] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(cc_offer_timer)=30”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:3] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(ccbs_available_timer)=4800”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:4] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(ccnr_available_timer)=7200”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:5] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(cc_callback_macro)=ccss-default”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:6] ExecIf(“SIP/4051-0000003b”, “1?Set(CALLCOMPLETION(cc_recall_timer)=15)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:7] ExecIf(“SIP/4051-0000003b”, “1?Set(CALLCOMPLETION(cc_max_agents)=5)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:8] ExecIf(“SIP/4051-0000003b”, “1?Set(CALLCOMPLETION(cc_agent_dialstring)=Local/4051_4052@from-ccss-extension)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:9] Set(“SIP/4051-0000003b”, “CALLCOMPLETION(cc_callback_macro)=ccss-default”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [agent_config@sub-ccss:10] Return(“SIP/4051-0000003b”, “”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@sub-ccss:5] Set(“SIP/4051-0000003b”, “DB(AMPUSER/4051/ccss/last_number)=4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@sub-ccss:6] Return(“SIP/4051-0000003b”, “”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:12] ExecIf(“SIP/4051-0000003b”, “0?Set(CHANNEL(language)=)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:13] GotoIf(“SIP/4051-0000003b”, “0?continue”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:14] Set(“SIP/4051-0000003b”, “__TTL=64”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:15] GotoIf(“SIP/4051-0000003b”, “1?continue”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-user-callerid,s,26)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/4051-0000003b”, “CALLERID(number)=4051”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/4051-0000003b”, “CALLERID(name)=Dylan”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-user-callerid:28] Set(“SIP/4051-0000003b”, “CHANNEL(language)=en”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:2] Set(“SIP/4051-0000003b”, “RingGroupMethod=none”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:3] Set(“SIP/4051-0000003b”, “__EXTTOCALL=4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:4] Set(“SIP/4051-0000003b”, “__PICKUPMARK=4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:5] Set(“SIP/4051-0000003b”, “RT=”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:6] Macro(“SIP/4051-0000003b”, “record-enable,4052,IN”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-record-enable:1] GotoIf(“SIP/4051-0000003b”, “1?check”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-record-enable,s,4)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-record-enable:4] ExecIf(“SIP/4051-0000003b”, “0?MacroExit()”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-record-enable:5] GotoIf(“SIP/4051-0000003b”, “0?Group:OUT”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-record-enable,s,14)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-record-enable:14] GotoIf(“SIP/4051-0000003b”, “1?IN”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-record-enable,s,18)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-record-enable:18] ExecIf(“SIP/4051-0000003b”, “1?MacroExit()”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:7] GotoIf(“SIP/4051-0000003b”, “1?macrodial”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-exten-vm,s,13)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:13] GosubIf(“SIP/4051-0000003b”, “0?clrheader,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:14] Macro(“SIP/4051-0000003b”, “dial-one,tr,4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:1] Set(“SIP/4051-0000003b”, “DEXTEN=4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:2] Set(“SIP/4051-0000003b”, “DIALSTATUS_CW=”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:3] GosubIf(“SIP/4051-0000003b”, “0?screen,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:4] GosubIf(“SIP/4051-0000003b”, “0?cf,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:5] GotoIf(“SIP/4051-0000003b”, “1?skip1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-dial-one,s,8)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:8] GotoIf(“SIP/4051-0000003b”, “0?nodial”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:9] GotoIf(“SIP/4051-0000003b”, “0?continue”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:10] Set(“SIP/4051-0000003b”, “EXTHASCW=ENABLED”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:11] GotoIf(“SIP/4051-0000003b”, “0?next1:cwinusebusy”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-dial-one,s,23)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:23] GotoIf(“SIP/4051-0000003b”, “1?next3:continue”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-dial-one,s,24)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:24] ExecIf(“SIP/4051-0000003b”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:25] GotoIf(“SIP/4051-0000003b”, “0?nodial”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:26] GosubIf(“SIP/4051-0000003b”, “1?dstring,1:dlocal,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:1] Set(“SIP/4051-0000003b”, “DSTRING=”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:2] Set(“SIP/4051-0000003b”, “DEVICES=4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:3] ExecIf(“SIP/4051-0000003b”, “0?Return()”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:4] ExecIf(“SIP/4051-0000003b”, “0?Set(DEVICES=052)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:5] Set(“SIP/4051-0000003b”, “LOOPCNT=1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:6] Set(“SIP/4051-0000003b”, “ITER=1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:7] Set(“SIP/4051-0000003b”, “THISDIAL=SIP/4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:8] GosubIf(“SIP/4051-0000003b”, “1?zap2dahdi,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/4051-0000003b”, “0?Return()”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/4051-0000003b”, “NEWDIAL=”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/4051-0000003b”, “LOOPCNT2=1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/4051-0000003b”, “ITER2=1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/4051-0000003b”, “THISPART2=SIP/4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/4051-0000003b”, “0?Set(THISPART2=DAHDI/4052)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/4051-0000003b”, “NEWDIAL=SIP/4052&”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/4051-0000003b”, “ITER2=2”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/4051-0000003b”, “0?begin2”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/4051-0000003b”, “THISDIAL=SIP/4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/4051-0000003b”, “”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:9] Set(“SIP/4051-0000003b”, “DSTRING=SIP/4052&”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:10] Set(“SIP/4051-0000003b”, “ITER=2”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:11] GotoIf(“SIP/4051-0000003b”, “0?begin”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:12] Set(“SIP/4051-0000003b”, “DSTRING=SIP/4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [dstring@macro-dial-one:13] Return(“SIP/4051-0000003b”, “”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:27] GotoIf(“SIP/4051-0000003b”, “0?nodial”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:28] GotoIf(“SIP/4051-0000003b”, “1?skiptrace”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Goto (macro-dial-one,s,30)
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:30] Set(“SIP/4051-0000003b”, “D_OPTIONS=tr”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:31] ExecIf(“SIP/4051-0000003b”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:32] ExecIf(“SIP/4051-0000003b”, “0?SIPAddHeader()”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:33] ExecIf(“SIP/4051-0000003b”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:34] GosubIf(“SIP/4051-0000003b”, “0?qwait,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:35] Set(“SIP/4051-0000003b”, “__CWIGNORE=”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:36] Set(“SIP/4051-0000003b”, “__KEEPCID=TRUE”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:37] GotoIf(“SIP/4051-0000003b”, “0?usegoto,1”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:38] GotoIf(“SIP/4051-0000003b”, “0?godial”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:39] Set(“SIP/4051-0000003b”, “CONNECTEDLINE(name,i)=Ben”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:40] Set(“SIP/4051-0000003b”, “CONNECTEDLINE(num)=4052”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:41] Set(“SIP/4051-0000003b”, “D_OPTIONS=trI”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:42] Dial(“SIP/4051-0000003b”, “SIP/4052,trI”) in new stack
[2011-11-23 11:44:35] VERBOSE[5450] netsock2.c: == Using SIP RTP TOS bits 184
[2011-11-23 11:44:35] VERBOSE[5450] netsock2.c: == Using SIP RTP CoS mark 5
[2011-11-23 11:44:35] VERBOSE[5450] app_dial.c: – Called SIP/4052
[2011-11-23 11:44:35] VERBOSE[5450] app_dial.c: – Connected line update to SIP/4051-0000003b prevented.
[2011-11-23 11:44:42] WARNING[3062] chan_sip.c: Retransmission timeout reached on transmission [email protected]:5060 for seqno 102 (Critical Request) – See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 6400ms with no response
[2011-11-23 11:44:42] WARNING[3062] chan_sip.c: Hanging up call [email protected]:5060 - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions).
[2011-11-23 11:44:42] VERBOSE[5450] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:43] ExecIf(“SIP/4051-0000003b”, “0?Set(DIALSTATUS=)”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:44] GosubIf(“SIP/4051-0000003b”, “0?s-CHANUNAVAIL,1”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-dial-one:45] MacroExit(“SIP/4051-0000003b”, “”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:15] GotoIf(“SIP/4051-0000003b”, “0?exit”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:16] Set(“SIP/4051-0000003b”, “SV_DIALSTATUS=CHANUNAVAIL”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:17] GosubIf(“SIP/4051-0000003b”, “0?docfu,1”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:18] GosubIf(“SIP/4051-0000003b”, “0?docfb,1”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:19] Set(“SIP/4051-0000003b”, “DIALSTATUS=CHANUNAVAIL”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:20] ExecIf(“SIP/4051-0000003b”, “0?MacroExit()”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s@macro-exten-vm:21] GotoIf(“SIP/4051-0000003b”, “1?s-CHANUNAVAIL,1”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Goto (macro-exten-vm,s-CHANUNAVAIL,1)
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf(“SIP/4051-0000003b”, “0?exit,1”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones(“SIP/4051-0000003b”, “congestion”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion(“SIP/4051-0000003b”, “10”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] app_macro.c: == Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on ‘SIP/4051-0000003b’ in macro ‘exten-vm’
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: == Spawn extension (from-internal, 4052, 2) exited non-zero on ‘SIP/4051-0000003b’
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/4051-0000003b”, “”) in new stack
[2011-11-23 11:44:42] VERBOSE[5450] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/4051-0000003b’