External Feature Codes

General Help
1

I’m trying to utilize the CLEC feature code for selective outbound caller ID blocking, but the system thinks that I’m trying to dial an internal feature code and tells me that the feature is not available. I am dialing out on an ISDN T1. Can someone tell me how to make this work?

Any help is much appreciated!!

-Mike

2

add the feature code to your outbound route as an acceptable dial pattern that goes to the desired trunk.

Philippe Lindheimer - FreePBX Project Lead
http//freepbx.org - IRC #freepbx

3

Thank you Philippe. Would it be *67NPANXXXXXX

4

Thank you everyone!

Would any of you have any ideas on this one?

http://www.freepbx.org/forum/freepbx/users/strange-inbound-caller-id-display

5

There’s many many ways to set it up.

You could make a route entry for example, 99|NXXNXXXXXX

And then make a second trunk called “pots-nocid”, in the dial rules put *67,+NXXNXXXXXX

Now when you dial 994045551234, it sends 4045551234 to the pots-nocid trunk, when dials *67,4045551234

There’s many many other ways of course… depends what you want to accomplish.

Greg MacLellan - Core FreePBX Developer
http//freepbx.org - irc.freenode.net #freepbx

6

Assuming you wanted *67NXXXXXX to go out yes.