Extension number in outbount CID

Hi

I have the problem that when I made a local call I see the in the outbound CID the extension number (like +23) or unkown, but if I call to a international phone the outbount cid appears properly.

this is the log that I have

[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:1] Macro(“SIP/23-00003827”, “user-callerid,SKIPTTL,”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:1] Set(“SIP/23-00003827”, “AMPUSER=23”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/23-00003827”, “0?report”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/23-00003827”, “1?Set(REALCALLERIDNUM=23)”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:4] Set(“SIP/23-00003827”, “AMPUSER=23”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:5] Set(“SIP/23-00003827”, “AMPUSERCIDNAME=Anjali Kapoor”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/23-00003827”, “0?report”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:7] Set(“SIP/23-00003827”, “AMPUSERCID=23”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:8] Set(“SIP/23-00003827”, “CALLERID(all)=“Anjali Kapoor” <23>”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:9] ExecIf(“SIP/23-00003827”, “0?Set(CHANNEL(language)=)”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:10] GotoIf(“SIP/23-00003827”, “1?continue”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Goto (macro-user-callerid,s,19)
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:19] Set(“SIP/23-00003827”, “CALLERID(number)=23”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:20] Set(“SIP/23-00003827”, “CALLERID(name)=AXXXXX KXXXXX”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:21] NoOp(“SIP/23-00003827”, “Using CallerID “AXXXX KXXXXXX” <23>”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:2] NoOp(“SIP/23-00003827”, “Calling Out Route: CH-trunk”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:3] Set(“SIP/23-00003827”, “MOHCLASS=default”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:4] Set(“SIP/23-00003827”, “_NODEST=”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:5] Macro(“SIP/23-00003827”, “record-enable,23,OUT,”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/23-00003827”, “1?check”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Goto (macro-record-enable,s,4)
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/23-00003827”, “0?MacroExit()”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/23-00003827”, “0?Group:OUT”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Goto (macro-record-enable,s,15)
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/23-00003827”, “0?IN”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/23-00003827”, “1?MacroExit()”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:6] Macro(“SIP/23-00003827”, “dialout-trunk,4,XXXXXX3498,”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:1] Set(“SIP/23-00003827”, “DIAL_TRUNK=4”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:2] GosubIf(“SIP/23-00003827”, “0?sub-pincheck,s,1”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/23-00003827”, “0?disabletrunk,1”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:4] Set(“SIP/23-00003827”, “DIAL_NUMBER=XXXXXXXXX3498”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:5] Set(“SIP/23-00003827”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:6] Set(“SIP/23-00003827”, “OUTBOUND_GROUP=OUT_4”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/23-00003827”, “1?nomax”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Goto (macro-dialout-trunk,s,9)
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/23-00003827”, “0?skipoutcid”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:10] Set(“SIP/23-00003827”, “DIAL_TRUNK_OPTIONS=”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:11] Macro(“SIP/23-00003827”, “outbound-callerid,4”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/23-00003827”, “0?Set(CALLERPRES()=)”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:2] ExecIf(“SIP/23-00003827”, “0?Set(REALCALLERIDNUM=AXXX KXXXX)”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/23-00003827”, “1?normcid”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Goto (macro-outbound-callerid,s,6)
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:6] Set(“SIP/23-00003827”, “USEROUTCID=XXXXXX005763”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:7] Set(“SIP/23-00003827”, “EMERGENCYCID=”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:8] Set(“SIP/23-00003827”, “TRUNKOUTCID=”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:9] GotoIf(“SIP/23-00003827”, “1?trunkcid”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Goto (macro-outbound-callerid,s,12)
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/23-00003827”, “0?Set(CALLERID(name)=)”) in new stack
[Jun 13 14:43:43] VERBOSE[14929][C-00001909] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/23-00003827”, “1?Set(CALLERID(name)=XXXXX5763)”) in new stack

and this is my macro-outbound-callerid:

[macro-outbound-callerid]
include => macro-outbound-callerid-custom
exten => s,1,ExecIf($["${CALLINGPRES_SV}" != “”]?Set(CALLERPRES()=${CALLINGPRES_SV}))
exten => s,n,ExecIf($["${REALCALLERIDNUM:1:2}" = “”]?Set(REALCALLERIDNUM=${CALLERID(name)}))
exten => s,n(start),GotoIf($[ $["${REALCALLERIDNUM}" = “”] | $["${KEEPCID}" != “TRUE”] | $["${OUTKEEPCID_${ARG1}}" = “on”] ]?normcid)
exten => s,n,Set(USEROUTCID=${REALCALLERIDNUM})
exten => s,n,GotoIf($[“foo${DB(AMPUSER/${REALCALLERIDNUM}/device)}” = “foo”]?bypass)
exten => s,n(normcid),Set(USEROUTCID=${DB(AMPUSER/${AMPUSER}/outboundcid)})
exten => s,n(bypass),Set(EMERGENCYCID=${DB(DEVICE/${REALCALLERIDNUM}/emergency_cid)})
exten => s,n,Set(TRUNKOUTCID=${OUTCID_${ARG1}})
exten => s,n,GotoIf($["${EMERGENCYROUTE:1:2}" = “” | “${EMERGENCYCID:1:2}” = “”]?trunkcid)
exten => s,n,Set(CALLERID(all)=${EMERGENCYCID})
exten => s,n(exit),MacroExit()
exten => s,n(trunkcid),ExecIf($[${LEN(${TRUNKOUTCID})} != 0]?Set(CALLERID(name)=${TRUNKOUTCID}))
exten => s,n(usercid),ExecIf($[${LEN(${USEROUTCID})} != 0]?Set(CALLERID(name)=${USEROUTCID}))
exten => s,n,ExecIf($[${LEN(${TRUNKCIDOVERRIDE})} != 0 | ${LEN(${FORCEDOUTCID_${ARG1}})} != 0]?Set(CALLERID(all)=${IF($[${LEN(${FORCEDOUTCID_${ARG1}})}=0]?${TRUNKCIDOVER$
exten => s,n(hidecid),ExecIf($["${CALLERID(name)}"=“hidden”]?Set(CALLERPRES()=prohib_passed_screen))

; end of [macro-outbound-callerid]

Thank you very much!