OK so I am stumped here. The system was working perfectly for 3 weeks, no issues at all. I went away for a week and came back to nothing but problems.
I can make outgoing calls just fine on any line, but the extensions cannot call each other anymore. At first they went straight to voicemail. I tinkered with the system thinking maybe it was a custom context that somehow got corrupted. Ended up deleting all trunks, groups, extensions, and routes from the entire system. Disabled and uninstalled custom contexts. Updated system to latest beta.
Now ALL incoming calls error out at macro-dial-one:42 All incoming calls whether from a DID or extension go nowhere. When calling extension to extension you hear a busy tone, incoming DID’s simply ring forever!
Server:AWS EC2
Centos 6
Asterisk 1.8.7.1
FreePBX 2.10.0Beta2.1
Every module but Outbound Permissions and Custom Contexts is installed. Many simply disabled. But these two are no longer installed at all.
– Executing [s@macro-dial-one:42] Dial(“SIP/74.55.75.30-0000000c”, “SIP/801,trI”) in new stack
[Dec 9 08:00:48] WARNING[30245]: app_dial.c:2198 dial_exec_full: Unable to create channel of type ‘SIP’ (cause 20 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
Desperately need some help here!
POSTING 2 LOGS 1 FROM EXTENSION TO EXTENSION AND OTHER DID INCOMING
ONLY CHANGED IP’s and PHONE NUMBERS INSIDE the logs Below
********* This is the response callig extension to extension *********
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [801@from-internal:1] ExecIf(“SIP/800-0000000d”, “0?Set(__RINGTIMER=0)”) in new stack
– Executing [801@from-internal:2] Macro(“SIP/800-0000000d”, “exten-vm,novm,801,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/800-0000000d”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/800-0000000d”, “AMPUSER=800”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/800-0000000d”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/800-0000000d”, “1?Set(REALCALLERIDNUM=800)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/800-0000000d”, “AMPUSER=800”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/800-0000000d”, “AMPUSERCIDNAME=800”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/800-0000000d”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/800-0000000d”, “AMPUSERCID=800”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/800-0000000d”, “CALLERID(all)=“800” <800>”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“SIP/800-0000000d”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:10] ExecIf(“SIP/800-0000000d”, “0?Set(GROUP(concurrency_limit)=800)”) in new stack
– Executing [s@macro-user-callerid:11] GotoIf(“SIP/800-0000000d”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:12] Set(“SIP/800-0000000d”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:13] GotoIf(“SIP/800-0000000d”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,24)
– Executing [s@macro-user-callerid:24] Set(“SIP/800-0000000d”, “CALLERID(number)=800”) in new stack
– Executing [s@macro-user-callerid:25] Set(“SIP/800-0000000d”, “CALLERID(name)=800”) in new stack
– Executing [s@macro-user-callerid:26] Set(“SIP/800-0000000d”, “CHANNEL(language)=en”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/800-0000000d”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/800-0000000d”, “__EXTTOCALL=801”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/800-0000000d”, “__PICKUPMARK=801”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/800-0000000d”, “RT=”) in new stack
– Executing [s@macro-exten-vm:6] Gosub(“SIP/800-0000000d”, “sub-record-check,s,1(exten,801,)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/800-0000000d”, “1?check”) in new stack
– Goto (sub-record-check,s,3)
– Executing [s@sub-record-check:3] Set(“SIP/800-0000000d”, “MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:4] GotoIf(“SIP/800-0000000d”, “1?next”) in new stack
– Goto (sub-record-check,s,7)
– Executing [s@sub-record-check:7] ExecIf(“SIP/800-0000000d”, “0?Return()”) in new stack
– Executing [s@sub-record-check:8] GotoIf(“SIP/800-0000000d”, “0?exten,1”) in new stack
– Executing [s@sub-record-check:9] Set(“SIP/800-0000000d”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:10] ExecIf(“SIP/800-0000000d”, “0?Set(__REC_POLICY_MODE=)”) in new stack
– Executing [s@sub-record-check:11] Set(“SIP/800-0000000d”, “NOW=1323390027”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/800-0000000d”, “__DAY=09”) in new stack
– Executing [s@sub-record-check:13] Set(“SIP/800-0000000d”, “__MONTH=12”) in new stack
– Executing [s@sub-record-check:14] Set(“SIP/800-0000000d”, “__YEAR=2011”) in new stack
– Executing [s@sub-record-check:15] Set(“SIP/800-0000000d”, “__TIMESTR=20111209-082027”) in new stack
– Executing [s@sub-record-check:16] Set(“SIP/800-0000000d”, “__FROMEXTEN=800”) in new stack
– Executing [s@sub-record-check:17] Set(“SIP/800-0000000d”, “__CALLFILENAME=exten-801-800-20111209-082027-1323390027.25”) in new stack
– Executing [s@sub-record-check:18] Goto(“SIP/800-0000000d”, “exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] GotoIf(“SIP/800-0000000d”, “0?callee”) in new stack
– Executing [exten@sub-record-check:2] Set(“SIP/800-0000000d”, “__REC_POLICY_MODE=dontcare”) in new stack
– Executing [exten@sub-record-check:3] GotoIf(“SIP/800-0000000d”, “1?caller”) in new stack
– Goto (sub-record-check,exten,10)
– Executing [exten@sub-record-check:10] Set(“SIP/800-0000000d”, “REC_POLICY_MODE=dontcare”) in new stack
– Executing [exten@sub-record-check:11] GosubIf(“SIP/800-0000000d”, “0?record,1(exten,801,800)”) in new stack
– Executing [exten@sub-record-check:12] Return(“SIP/800-0000000d”, “”) in new stack
– Executing [s@macro-exten-vm:7] GotoIf(“SIP/800-0000000d”, “1?macrodial”) in new stack
– Goto (macro-exten-vm,s,13)
– Executing [s@macro-exten-vm:13] GosubIf(“SIP/800-0000000d”, “0?clrheader,1()”) in new stack
– Executing [s@macro-exten-vm:14] Macro(“SIP/800-0000000d”, “dial-one,tr,801”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/800-0000000d”, “DEXTEN=801”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/800-0000000d”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“SIP/800-0000000d”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“SIP/800-0000000d”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“SIP/800-0000000d”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“SIP/800-0000000d”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“SIP/800-0000000d”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“SIP/800-0000000d”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/800-0000000d”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,23)
– Executing [s@macro-dial-one:23] GotoIf(“SIP/800-0000000d”, “1?next3:continue”) in new stack
– Goto (macro-dial-one,s,24)
– Executing [s@macro-dial-one:24] ExecIf(“SIP/800-0000000d”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
– Executing [s@macro-dial-one:25] GotoIf(“SIP/800-0000000d”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:26] GosubIf(“SIP/800-0000000d”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“SIP/800-0000000d”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“SIP/800-0000000d”, “DEVICES=801”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“SIP/800-0000000d”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“SIP/800-0000000d”, “0?Set(DEVICES=01)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“SIP/800-0000000d”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“SIP/800-0000000d”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“SIP/800-0000000d”, “THISDIAL=SIP/801”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“SIP/800-0000000d”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/800-0000000d”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/800-0000000d”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/800-0000000d”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/800-0000000d”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/800-0000000d”, “THISPART2=SIP/801”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/800-0000000d”, “0?Set(THISPART2=DAHDI/801)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/800-0000000d”, “NEWDIAL=SIP/801&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/800-0000000d”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/800-0000000d”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/800-0000000d”, “THISDIAL=SIP/801”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/800-0000000d”, “”) in new stack
– Executing [dstring@macro-dial-one:9] Set(“SIP/800-0000000d”, “DSTRING=SIP/801&”) in new stack
– Executing [dstring@macro-dial-one:10] Set(“SIP/800-0000000d”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:11] GotoIf(“SIP/800-0000000d”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:12] Set(“SIP/800-0000000d”, “DSTRING=SIP/801”) in new stack
– Executing [dstring@macro-dial-one:13] Return(“SIP/800-0000000d”, “”) in new stack
– Executing [s@macro-dial-one:27] GotoIf(“SIP/800-0000000d”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GotoIf(“SIP/800-0000000d”, “1?skiptrace”) in new stack
– Goto (macro-dial-one,s,30)
– Executing [s@macro-dial-one:30] Set(“SIP/800-0000000d”, “D_OPTIONS=tr”) in new stack
– Executing [s@macro-dial-one:31] ExecIf(“SIP/800-0000000d”, “0?SIPAddHeader(Alert-Info: )”) in new stack
– Executing [s@macro-dial-one:32] ExecIf(“SIP/800-0000000d”, “0?SIPAddHeader()”) in new stack
– Executing [s@macro-dial-one:33] ExecIf(“SIP/800-0000000d”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:34] GosubIf(“SIP/800-0000000d”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:35] Set(“SIP/800-0000000d”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:36] Set(“SIP/800-0000000d”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:37] GotoIf(“SIP/800-0000000d”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:38] GotoIf(“SIP/800-0000000d”, “0?godial”) in new stack
– Executing [s@macro-dial-one:39] Set(“SIP/800-0000000d”, “CONNECTEDLINE(name,i)=801”) in new stack
– Executing [s@macro-dial-one:40] Set(“SIP/800-0000000d”, “CONNECTEDLINE(num)=801”) in new stack
– Executing [s@macro-dial-one:41] Set(“SIP/800-0000000d”, “D_OPTIONS=trI”) in new stack
– Executing [s@macro-dial-one:42] Dial(“SIP/800-0000000d”, “SIP/801,trI”) in new stack
[Dec 9 08:20:27] WARNING[31714]: app_dial.c:2198 dial_exec_full: Unable to create channel of type ‘SIP’ (cause 20 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
– Executing [s@macro-dial-one:43] ExecIf(“SIP/800-0000000d”, “0?Set(DIALSTATUS=)”) in new stack
– Executing [s@macro-dial-one:44] GosubIf(“SIP/800-0000000d”, “0?s-CHANUNAVAIL,1()”) in new stack
– Executing [s@macro-dial-one:45] MacroExit(“SIP/800-0000000d”, “”) in new stack
– Executing [s@macro-exten-vm:15] GotoIf(“SIP/800-0000000d”, “0?exit”) in new stack
– Executing [s@macro-exten-vm:16] Set(“SIP/800-0000000d”, “SV_DIALSTATUS=CHANUNAVAIL”) in new stack
– Executing [s@macro-exten-vm:17] GosubIf(“SIP/800-0000000d”, “0?docfu,1()”) in new stack
– Executing [s@macro-exten-vm:18] GosubIf(“SIP/800-0000000d”, “0?docfb,1()”) in new stack
– Executing [s@macro-exten-vm:19] Set(“SIP/800-0000000d”, “DIALSTATUS=CHANUNAVAIL”) in new stack
– Executing [s@macro-exten-vm:20] ExecIf(“SIP/800-0000000d”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:21] GotoIf(“SIP/800-0000000d”, “1?s-CHANUNAVAIL,1”) in new stack
– Goto (macro-exten-vm,s-CHANUNAVAIL,1)
– Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf(“SIP/800-0000000d”, “0?exit,1”) in new stack
– Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones(“SIP/800-0000000d”, “congestion”) in new stack
– Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion(“SIP/800-0000000d”, “10”) in new stack
== Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on ‘SIP/800-0000000d’ in macro ‘exten-vm’
== Spawn extension (from-internal, 801, 2) exited non-zero on ‘SIP/800-0000000d’
– Executing [h@from-internal:1] Hangup(“SIP/800-0000000d”, “”) in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/800-0000000d’
********* This is the response from incomign DID linked directly to an extension *********
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [1NxxNxxBxxx@from-sip-external:1] NoOp(“SIP/192.0.0.1-0000000f”, “Received incoming SIP connection from unknown peer to 1NxxNxxBxxx”) in new stack
– Executing [1NxxNxxBxxx@from-sip-external:2] Set(“SIP/192.0.0.1-0000000f”, “DID=1NxxNxxBxxx”) in new stack
– Executing [1NxxNxxBxxx@from-sip-external:3] Goto(“SIP/192.0.0.1-0000000f”, “s,1”) in new stack
– Goto (from-sip-external,s,1)
– Executing [s@from-sip-external:1] GotoIf(“SIP/192.0.0.1-0000000f”, “1?checklang:noanonymous”) in new stack
– Goto (from-sip-external,s,2)
– Executing [s@from-sip-external:2] GotoIf(“SIP/192.0.0.1-0000000f”, “0?setlanguage:from-trunk,1NxxNxxBxxx,1”) in new stack
– Goto (from-trunk,1NxxNxxBxxx,1)
– Executing [1NxxNxxBxxx@from-trunk:1] Set(“SIP/192.0.0.1-0000000f”, “__FROM_DID=1NxxNxxBxxx”) in new stack
– Executing [1NxxNxxBxxx@from-trunk:2] Gosub(“SIP/192.0.0.1-0000000f”, “app-blacklist-check,s,1()”) in new stack
– Executing [s@app-blacklist-check:1] GotoIf(“SIP/192.0.0.1-0000000f”, “0?check-blocked”) in new stack
– Executing [s@app-blacklist-check:2] GotoIf(“SIP/192.0.0.1-0000000f”, “0?check-blocked”) in new stack
– Executing [s@app-blacklist-check:3] GotoIf(“SIP/192.0.0.1-0000000f”, “0?check-blocked:check”) in new stack
– Goto (app-blacklist-check,s,5)
– Executing [s@app-blacklist-check:5] GotoIf(“SIP/192.0.0.1-0000000f”, “0?blacklisted”) in new stack
– Executing [s@app-blacklist-check:6] Set(“SIP/192.0.0.1-0000000f”, “CALLED_BLACKLIST=1”) in new stack
– Executing [s@app-blacklist-check:7] Return(“SIP/192.0.0.1-0000000f”, “”) in new stack
– Executing [1NxxNxxBxxx@from-trunk:3] Set(“SIP/192.0.0.1-0000000f”, “CDR(did)=1NxxNxxBxxx”) in new stack
– Executing [1NxxNxxBxxx@from-trunk:4] ExecIf(“SIP/192.0.0.1-0000000f”, “0 ?Set(CALLERID(name)=8005551212)”) in new stack
– Executing [1NxxNxxBxxx@from-trunk:5] Set(“SIP/192.0.0.1-0000000f”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
– Executing [1NxxNxxBxxx@from-trunk:6] Set(“SIP/192.0.0.1-0000000f”, “CALLERPRES()=allowed_not_screened”) in new stack
– Executing [1NxxNxxBxxx@from-trunk:7] Goto(“SIP/192.0.0.1-0000000f”, “from-did-direct,801,1”) in new stack
– Goto (from-did-direct,801,1)
– Executing [801@from-did-direct:1] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(__RINGTIMER=0)”) in new stack
– Executing [801@from-did-direct:2] Macro(“SIP/192.0.0.1-0000000f”, “exten-vm,novm,801,0,0,0”) in new stack
– Executing [s@macro-exten-vm:1] Macro(“SIP/192.0.0.1-0000000f”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/192.0.0.1-0000000f”, “AMPUSER=8005551212”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/192.0.0.1-0000000f”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/192.0.0.1-0000000f”, “1?Set(REALCALLERIDNUM=8005551212)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/192.0.0.1-0000000f”, “AMPUSER=”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/192.0.0.1-0000000f”, “AMPUSERCIDNAME=”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/192.0.0.1-0000000f”, “1?report”) in new stack
– Goto (macro-user-callerid,s,11)
– Executing [s@macro-user-callerid:11] GotoIf(“SIP/192.0.0.1-0000000f”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:12] Set(“SIP/192.0.0.1-0000000f”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:13] GotoIf(“SIP/192.0.0.1-0000000f”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,24)
– Executing [s@macro-user-callerid:24] Set(“SIP/192.0.0.1-0000000f”, “CALLERID(number)=8005551212”) in new stack
– Executing [s@macro-user-callerid:25] Set(“SIP/192.0.0.1-0000000f”, “CALLERID(name)=8005551212”) in new stack
– Executing [s@macro-user-callerid:26] Set(“SIP/192.0.0.1-0000000f”, “CHANNEL(language)=en”) in new stack
– Executing [s@macro-exten-vm:2] Set(“SIP/192.0.0.1-0000000f”, “RingGroupMethod=none”) in new stack
– Executing [s@macro-exten-vm:3] Set(“SIP/192.0.0.1-0000000f”, “__EXTTOCALL=801”) in new stack
– Executing [s@macro-exten-vm:4] Set(“SIP/192.0.0.1-0000000f”, “__PICKUPMARK=801”) in new stack
– Executing [s@macro-exten-vm:5] Set(“SIP/192.0.0.1-0000000f”, “RT=”) in new stack
– Executing [s@macro-exten-vm:6] Gosub(“SIP/192.0.0.1-0000000f”, “sub-record-check,s,1(exten,801,)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/192.0.0.1-0000000f”, “1?check”) in new stack
– Goto (sub-record-check,s,3)
– Executing [s@sub-record-check:3] Set(“SIP/192.0.0.1-0000000f”, “MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:4] GotoIf(“SIP/192.0.0.1-0000000f”, “1?next”) in new stack
– Goto (sub-record-check,s,7)
– Executing [s@sub-record-check:7] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Return()”) in new stack
– Executing [s@sub-record-check:8] GotoIf(“SIP/192.0.0.1-0000000f”, “0?exten,1”) in new stack
– Executing [s@sub-record-check:9] Set(“SIP/192.0.0.1-0000000f”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:10] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(__REC_POLICY_MODE=)”) in new stack
– Executing [s@sub-record-check:11] Set(“SIP/192.0.0.1-0000000f”, “NOW=1323390222”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/192.0.0.1-0000000f”, “__DAY=09”) in new stack
– Executing [s@sub-record-check:13] Set(“SIP/192.0.0.1-0000000f”, “__MONTH=12”) in new stack
– Executing [s@sub-record-check:14] Set(“SIP/192.0.0.1-0000000f”, “__YEAR=2011”) in new stack
– Executing [s@sub-record-check:15] Set(“SIP/192.0.0.1-0000000f”, “__TIMESTR=20111209-082342”) in new stack
– Executing [s@sub-record-check:16] Set(“SIP/192.0.0.1-0000000f”, “__FROMEXTEN=8005551212”) in new stack
– Executing [s@sub-record-check:17] Set(“SIP/192.0.0.1-0000000f”, “__CALLFILENAME=exten-801-8005551212-20111209-082342-1323390222.30”) in new stack
– Executing [s@sub-record-check:18] Goto(“SIP/192.0.0.1-0000000f”, “exten,1”) in new stack
– Goto (sub-record-check,exten,1)
– Executing [exten@sub-record-check:1] GotoIf(“SIP/192.0.0.1-0000000f”, “0?callee”) in new stack
– Executing [exten@sub-record-check:2] Set(“SIP/192.0.0.1-0000000f”, “__REC_POLICY_MODE=dontcare”) in new stack
– Executing [exten@sub-record-check:3] GotoIf(“SIP/192.0.0.1-0000000f”, “1?caller”) in new stack
– Goto (sub-record-check,exten,10)
– Executing [exten@sub-record-check:10] Set(“SIP/192.0.0.1-0000000f”, “REC_POLICY_MODE=”) in new stack
– Executing [exten@sub-record-check:11] GosubIf(“SIP/192.0.0.1-0000000f”, “0?record,1(exten,801,8005551212)”) in new stack
– Executing [exten@sub-record-check:12] Return(“SIP/192.0.0.1-0000000f”, “”) in new stack
– Executing [s@macro-exten-vm:7] GotoIf(“SIP/192.0.0.1-0000000f”, “1?macrodial”) in new stack
– Goto (macro-exten-vm,s,13)
– Executing [s@macro-exten-vm:13] GosubIf(“SIP/192.0.0.1-0000000f”, “0?clrheader,1()”) in new stack
– Executing [s@macro-exten-vm:14] Macro(“SIP/192.0.0.1-0000000f”, “dial-one,tr,801”) in new stack
– Executing [s@macro-dial-one:1] Set(“SIP/192.0.0.1-0000000f”, “DEXTEN=801”) in new stack
– Executing [s@macro-dial-one:2] Set(“SIP/192.0.0.1-0000000f”, “DIALSTATUS_CW=”) in new stack
– Executing [s@macro-dial-one:3] GosubIf(“SIP/192.0.0.1-0000000f”, “0?screen,1()”) in new stack
– Executing [s@macro-dial-one:4] GosubIf(“SIP/192.0.0.1-0000000f”, “0?cf,1()”) in new stack
– Executing [s@macro-dial-one:5] GotoIf(“SIP/192.0.0.1-0000000f”, “1?skip1”) in new stack
– Goto (macro-dial-one,s,8)
– Executing [s@macro-dial-one:8] GotoIf(“SIP/192.0.0.1-0000000f”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:9] GotoIf(“SIP/192.0.0.1-0000000f”, “0?continue”) in new stack
– Executing [s@macro-dial-one:10] Set(“SIP/192.0.0.1-0000000f”, “EXTHASCW=ENABLED”) in new stack
– Executing [s@macro-dial-one:11] GotoIf(“SIP/192.0.0.1-0000000f”, “0?next1:cwinusebusy”) in new stack
– Goto (macro-dial-one,s,23)
– Executing [s@macro-dial-one:23] GotoIf(“SIP/192.0.0.1-0000000f”, “1?next3:continue”) in new stack
– Goto (macro-dial-one,s,24)
– Executing [s@macro-dial-one:24] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
– Executing [s@macro-dial-one:25] GotoIf(“SIP/192.0.0.1-0000000f”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:26] GosubIf(“SIP/192.0.0.1-0000000f”, “1?dstring,1():dlocal,1()”) in new stack
– Executing [dstring@macro-dial-one:1] Set(“SIP/192.0.0.1-0000000f”, “DSTRING=”) in new stack
– Executing [dstring@macro-dial-one:2] Set(“SIP/192.0.0.1-0000000f”, “DEVICES=801”) in new stack
– Executing [dstring@macro-dial-one:3] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Return()”) in new stack
– Executing [dstring@macro-dial-one:4] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(DEVICES=01)”) in new stack
– Executing [dstring@macro-dial-one:5] Set(“SIP/192.0.0.1-0000000f”, “LOOPCNT=1”) in new stack
– Executing [dstring@macro-dial-one:6] Set(“SIP/192.0.0.1-0000000f”, “ITER=1”) in new stack
– Executing [dstring@macro-dial-one:7] Set(“SIP/192.0.0.1-0000000f”, “THISDIAL=SIP/801”) in new stack
– Executing [dstring@macro-dial-one:8] GosubIf(“SIP/192.0.0.1-0000000f”, “1?zap2dahdi,1()”) in new stack
– Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Return()”) in new stack
– Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/192.0.0.1-0000000f”, “NEWDIAL=”) in new stack
– Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/192.0.0.1-0000000f”, “LOOPCNT2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/192.0.0.1-0000000f”, “ITER2=1”) in new stack
– Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/192.0.0.1-0000000f”, “THISPART2=SIP/801”) in new stack
– Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(THISPART2=DAHDI/801)”) in new stack
– Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/192.0.0.1-0000000f”, “NEWDIAL=SIP/801&”) in new stack
– Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/192.0.0.1-0000000f”, “ITER2=2”) in new stack
– Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/192.0.0.1-0000000f”, “0?begin2”) in new stack
– Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/192.0.0.1-0000000f”, “THISDIAL=SIP/801”) in new stack
– Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/192.0.0.1-0000000f”, “”) in new stack
– Executing [dstring@macro-dial-one:9] Set(“SIP/192.0.0.1-0000000f”, “DSTRING=SIP/801&”) in new stack
– Executing [dstring@macro-dial-one:10] Set(“SIP/192.0.0.1-0000000f”, “ITER=2”) in new stack
– Executing [dstring@macro-dial-one:11] GotoIf(“SIP/192.0.0.1-0000000f”, “0?begin”) in new stack
– Executing [dstring@macro-dial-one:12] Set(“SIP/192.0.0.1-0000000f”, “DSTRING=SIP/801”) in new stack
– Executing [dstring@macro-dial-one:13] Return(“SIP/192.0.0.1-0000000f”, “”) in new stack
– Executing [s@macro-dial-one:27] GotoIf(“SIP/192.0.0.1-0000000f”, “0?nodial”) in new stack
– Executing [s@macro-dial-one:28] GotoIf(“SIP/192.0.0.1-0000000f”, “1?skiptrace”) in new stack
– Goto (macro-dial-one,s,30)
– Executing [s@macro-dial-one:30] Set(“SIP/192.0.0.1-0000000f”, “D_OPTIONS=tr”) in new stack
– Executing [s@macro-dial-one:31] ExecIf(“SIP/192.0.0.1-0000000f”, “0?SIPAddHeader(Alert-Info: )”) in new stack
– Executing [s@macro-dial-one:32] ExecIf(“SIP/192.0.0.1-0000000f”, “0?SIPAddHeader()”) in new stack
– Executing [s@macro-dial-one:33] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(CHANNEL(musicclass)=)”) in new stack
– Executing [s@macro-dial-one:34] GosubIf(“SIP/192.0.0.1-0000000f”, “0?qwait,1()”) in new stack
– Executing [s@macro-dial-one:35] Set(“SIP/192.0.0.1-0000000f”, “__CWIGNORE=”) in new stack
– Executing [s@macro-dial-one:36] Set(“SIP/192.0.0.1-0000000f”, “__KEEPCID=TRUE”) in new stack
– Executing [s@macro-dial-one:37] GotoIf(“SIP/192.0.0.1-0000000f”, “0?usegoto,1”) in new stack
– Executing [s@macro-dial-one:38] GotoIf(“SIP/192.0.0.1-0000000f”, “0?godial”) in new stack
– Executing [s@macro-dial-one:39] Set(“SIP/192.0.0.1-0000000f”, “CONNECTEDLINE(name,i)=801”) in new stack
– Executing [s@macro-dial-one:40] Set(“SIP/192.0.0.1-0000000f”, “CONNECTEDLINE(num)=801”) in new stack
– Executing [s@macro-dial-one:41] Set(“SIP/192.0.0.1-0000000f”, “D_OPTIONS=trI”) in new stack
– Executing [s@macro-dial-one:42] Dial(“SIP/192.0.0.1-0000000f”, “SIP/801,trI”) in new stack
[Dec 9 08:23:42] WARNING[31957]: app_dial.c:2198 dial_exec_full: Unable to create channel of type ‘SIP’ (cause 20 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
– Executing [s@macro-dial-one:43] ExecIf(“SIP/192.0.0.1-0000000f”, “0?Set(DIALSTATUS=)”) in new stack
– Executing [s@macro-dial-one:44] GosubIf(“SIP/192.0.0.1-0000000f”, “0?s-CHANUNAVAIL,1()”) in new stack
– Executing [s@macro-dial-one:45] MacroExit(“SIP/192.0.0.1-0000000f”, “”) in new stack
– Executing [s@macro-exten-vm:15] GotoIf(“SIP/192.0.0.1-0000000f”, “0?exit”) in new stack
– Executing [s@macro-exten-vm:16] Set(“SIP/192.0.0.1-0000000f”, “SV_DIALSTATUS=CHANUNAVAIL”) in new stack
– Executing [s@macro-exten-vm:17] GosubIf(“SIP/192.0.0.1-0000000f”, “0?docfu,1()”) in new stack
– Executing [s@macro-exten-vm:18] GosubIf(“SIP/192.0.0.1-0000000f”, “0?docfb,1()”) in new stack
– Executing [s@macro-exten-vm:19] Set(“SIP/192.0.0.1-0000000f”, “DIALSTATUS=CHANUNAVAIL”) in new stack
– Executing [s@macro-exten-vm:20] ExecIf(“SIP/192.0.0.1-0000000f”, “0?MacroExit()”) in new stack
– Executing [s@macro-exten-vm:21] GotoIf(“SIP/192.0.0.1-0000000f”, “1?s-CHANUNAVAIL,1”) in new stack
– Goto (macro-exten-vm,s-CHANUNAVAIL,1)
– Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf(“SIP/192.0.0.1-0000000f”, “0?exit,1”) in new stack
– Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones(“SIP/192.0.0.1-0000000f”, “congestion”) in new stack
– Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion(“SIP/192.0.0.1-0000000f”, “10”) in new stack
== Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on ‘SIP/192.0.0.1-0000000f’ in macro ‘exten-vm’
== Spawn extension (from-did-direct, 801, 2) exited non-zero on ‘SIP/192.0.0.1-0000000f’
– Executing [h@from-did-direct:1] Macro(“SIP/192.0.0.1-0000000f”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/192.0.0.1-0000000f”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] Hangup(“SIP/192.0.0.1-0000000f”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on ‘SIP/192.0.0.1-0000000f’ in macro ‘hangupcall’
== Spawn extension (from-did-direct, h, 1) exited non-zero on ‘SIP/192.0.0.1-0000000f’
== Spawn extension (macro-dialout-trunk, s, 30) exited non-zero on ‘SIP/800-0000000e’ in macro ‘dialout-trunk’