EPM Network Scan and VLANs

Hey guys,

I want to setup a separate VLAN for handsets to use but I want to make sure the handsets can be picked up by the network scan.

I know that Network Scan uses ARP to locate the handsets so my thought was to add a virtual NIC to the PBX on the VLAN I would be putting the handsets on. Does anyone know if this will work or has someone tried this with any success?

So the PBX would have two NICs (one physical and one virtual).
Physical NIC: eth0 on Subnet A
Virtual NIC: eth0:0 on Subnet B

Thanks!