Dahdi Span groups - help config

Hi all im new to FreePbx and want to make Dahdi groups.
Now my dahdi-channels.conf is like this

i have add g1 dahdi trunk , if i change group=0,11 => group=1,11 and group=0,12 = >group=1,12
span 1 and 2 will go to g1 ? needs something else ?

; Autogenerated by /usr/sbin/dahdi_genconf on Mon Apr 23 19:24:59 2018
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
;dahdi-channels.conf

; Span 1: B4/0/1 “B4XXP (PCI) Card 0 Span 1” (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_net
channel => 1-2
context = default
group = 63

; Span 2: B4/0/2 “B4XXP (PCI) Card 0 Span 2”
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 4-5
context = default
group = 63

; Span 3: B4/0/3 “B4XXP (PCI) Card 0 Span 3”
group=0,13
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 7-8
context = default
group = 63

; Span 4: B4/0/4 “B4XXP (PCI) Card 0 Span 4”
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 10-11
context = default
group = 63

; Span 5: B4/0/5 “B4XXP (PCI) Card 0 Span 5”
group=0,15
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 13-14
context = default
group = 63

; Span 6: B4/0/6 “B4XXP (PCI) Card 0 Span 6”
group=0,16
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 16-17
context = default
group = 63

; Span 7: B4/0/7 “B4XXP (PCI) Card 0 Span 7”
group=0,17
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 19-20
context = default
group = 63

; Span 8: B4/0/8 “B4XXP (PCI) Card 0 Span 8”
group=0,18
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 22-23
context = default
group = 63

If the cards are sangoma or digium cards, you can config from GUI, no need to generate confi manually, and you also have to set outbound and inbound call routing from GUI.

From where ? in connectivity i see no hardware option there …

https://wiki.freepbx.org/display/FPG/DAHDI+Configs

I have not same options in dhadi for hardware so i have to do it from files

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.