Dahdi requires restart

General Help
1

Hi Guys

For some weird reason dahdi requires a “dahdi restart” after i apply changes on the interface.

The strange thing is if i do not restart dahdi incoming calls ring but do not enter the asterisk box.

Any ideas?

2

I have the same problem. I am interested in the solution or other informations about the problem.

If there is no solutions, I add a question, is it possible to customize the action of the “Apply config” button to execute automatically a “dahdi restart” after applying the changes ?

3

If you are having to restart DAHDI there is something wrong with how you system was built and configured. You should not have to restart DAHDI.

I little info on your system would be very helpful. What version of Asterisk, FreePBX and DAHDI. Hand built or the FreePBX distro.

4

My IPBX was built with AsteriskNow. The versions are :

  • Asterisk : 1.8.11.0
  • FreePBX : 2.10.0.8
  • DAHDI : 2.6.0
    I have one Digium B410P card on it.

If you need more informations just tell me. I am new in the Asterisk world, I have probably made something wrong :wink:

5

mlombard

AsteriskNow does not work very well. You would be better off running the FreePBX Distro.

6

Thank you for your advice, but I can’t re build my system now. It is quite fully functional, it is the only problem I have.
There is no way to resolve the problem with my system ?

7

We are experiencing the same problem here. Here are some details about our hardware and configuration:

Asterisk 1.8.15.1

DAHDI Version: 2.6.1

dahdi_hardware result:

pci:0000:04:00.0     wcb4xxp+     1397:08b4 OpenVox B200P

dahdi_scan result:

# dahdi_scan
[1]
active=yes
alarms=OK
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=OpenVox B200P
location=PCI Bus 04 Slot 01
basechan=1
totchans=3
irq=0
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
[2]
active=yes
alarms=OK
description=B4XXP (PCI) Card 0 Span 2
name=B4/0/2
manufacturer=Digium
devicetype=OpenVox B200P
location=PCI Bus 04 Slot 01
basechan=4
totchans=3
irq=0
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS

Thank you

8

This is not a FreePBX issue. DAHDI and Asterisk Now are both Digium products.

This is not the place to be looking for help with this.