DAHDI not working after multiple module updates

FreePBX
1

Hello, I need help with my DAHDI config. This was working correctly prior to preforming multiple module updates. (I did not backup my system prior) PRI circuit with a sangoma card. ATT says circuit is fine. PRI card shows no alarms. Config for DAHDI posted in picture. However when looking at dahdi-channels config is diffrent from settings.

;Sangoma A101 port 1 [slot:4 bus:8 span:1] <wanpipe1>
switchtype=4ess
context=from-zaptel
group=0
echocancel=yes
signalling=pri_cpe
channel =>1-23

wanpipe
wanpipe707×730 31.2 KB

2

The PBX module doesn’t write to dahdi-channels.conf so it’s content is not relevant. The Asterisk console output of dahdi show channels and dahdi show channel 1 will show how your channels are configured.

3

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.