We are using a Digium PRI card which apparently uses module wcte43X in dahdi. It has worked flawlessly for years. We just did the FreePBX upgrade to 14 and after doing so Dahdi is all messed up.
I can get it partially back online by restarting the dahdi service in linux and by running the dahdi_cfg -vvv and then restarting asterisk with fwconsole restart. After doing that the card shows up with dahdi show status as being in ok alarm. However dahdi show channels never populates any channels.
We got it working by some miracle yesterday but after a scheduled reboot last night it all failed again. No today the steps we took yesterday don’t seem to be working.
We also noticed that a lot of the /etc/dahdi/ files were owned by root, and FreePBX was complaining about that. So we ran the fwconsole chown and took care of that problem. However we still don’t have a working PRI.
Can anyone offer any feedback on why this is broken and how to get around it?
Here is the output of my dahdi_cfg -vvv
dahdi_cfg -vvv
DAHDI Tools Version - 2.11.1
DAHDI Version: 2.11.1
Echo Canceller(s): HWEC
Configuration
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 15)
Channel 16: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 23)
Channel 24: D-channel (Default) (Echo Canceler: none) (Slaves: 24)
Channel 25: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 25)
Channel 26: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 26)
Channel 27: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 27)
Channel 28: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 28)
Channel 29: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 29)
Channel 30: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 30)
Channel 31: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 31)
Channel 32: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 32)
Channel 33: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 33)
Channel 34: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 34)
Channel 35: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 35)
Channel 36: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 36)
Channel 37: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 37)
Channel 38: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 38)
Channel 39: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 39)
Channel 40: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 40)
Channel 41: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 41)
Channel 42: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 42)
Channel 43: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 43)
Channel 44: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 44)
Channel 45: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 45)
Channel 46: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 46)
Channel 47: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 47)
Channel 48: D-channel (Default) (Echo Canceler: none) (Slaves: 48)
48 channels to configure.
Setting echocan for channel 1 to oslec
Setting echocan for channel 2 to oslec
Setting echocan for channel 3 to oslec
Setting echocan for channel 4 to oslec
Setting echocan for channel 5 to oslec
Setting echocan for channel 6 to oslec
Setting echocan for channel 7 to oslec
Setting echocan for channel 8 to oslec
Setting echocan for channel 9 to oslec
Setting echocan for channel 10 to oslec
Setting echocan for channel 11 to oslec
Setting echocan for channel 12 to oslec
Setting echocan for channel 13 to oslec
Setting echocan for channel 14 to oslec
Setting echocan for channel 15 to oslec
Setting echocan for channel 16 to oslec
Setting echocan for channel 17 to oslec
Setting echocan for channel 18 to oslec
Setting echocan for channel 19 to oslec
Setting echocan for channel 20 to oslec
Setting echocan for channel 21 to oslec
Setting echocan for channel 22 to oslec
Setting echocan for channel 23 to oslec
Setting echocan for channel 24 to none
Setting echocan for channel 25 to oslec
Setting echocan for channel 26 to oslec
Setting echocan for channel 27 to oslec
Setting echocan for channel 28 to oslec
Setting echocan for channel 29 to oslec
Setting echocan for channel 30 to oslec
Setting echocan for channel 31 to oslec
Setting echocan for channel 32 to oslec
Setting echocan for channel 33 to oslec
Setting echocan for channel 34 to oslec
Setting echocan for channel 35 to oslec
Setting echocan for channel 36 to oslec
Setting echocan for channel 37 to oslec
Setting echocan for channel 38 to oslec
Setting echocan for channel 39 to oslec
Setting echocan for channel 40 to oslec
Setting echocan for channel 41 to oslec