Hi,
I had a custom ext. 311 setup, dialing ext. 310 and sending a DTMF code. I wanted to update the DTMF digits, but it kept on sending the old code. So I deleted ext. 311 and it has disappeared from the extension list, but it still dials ext. 310 and sends the DTMF. I created a new ext. 311 with the new DTMF digits, but for some reason the old settings are still used.
How can I clear this ext. from the system so I can reuse ext. 311 with a new DTMF sequence ?
Brgds
Thomas
[2015-12-15 17:56:16] VERBOSE[1909][C-00000029] netsock2.c: == Using SIP RTP TOS bits 184
[2015-12-15 17:56:16] VERBOSE[1909][C-00000029] netsock2.c: == Using SIP RTP CoS mark 5
[2015-12-15 17:56:16] VERBOSE[1867] chan_sip.c: == Extension Changed 607[ext-local] new state InUse for Notify User 603
[2015-12-15 17:56:16] VERBOSE[31372][C-00000029] pbx.c: – Executing [311@from-internal:1] Answer(“SIP/607-00000038”, “”) in new stack
[2015-12-15 17:56:16] VERBOSE[31372][C-00000029] pbx.c: – Executing [311@from-internal:2] Wait(“SIP/607-00000038”, “1”) in new stack
[2015-12-15 17:56:17] VERBOSE[31372][C-00000029] pbx.c: – Executing [311@from-internal:3] Dial(“SIP/607-00000038”, “local/310@ext-local,30,rD(wwwww1)”) in new stack
[2015-12-15 17:56:17] VERBOSE[31372][C-00000029] app_dial.c: – Called local/310@ext-local
[2015-12-15 17:56:17] VERBOSE[31373][C-00000029] pbx.c: – Executing [310@ext-local:1] Set(“Local/310@ext-local-00000015;2”, “__RINGTIMER=15”) in new stack
[2015-12-15 17:56:17] VERBOSE[31373][C-00000029] pbx.c: – Executing [310@ext-local:2] Macro(“Local/310@ext-local-00000015;2”, “exten-vm,novm,310,0,0,0”) in new stack
[2015-12-15 17:56:17] VERBOSE[31373][C-00000029] pbx.c: – Executing [s@macro-exten-vm:1] Macro(“Local/310@ext-local-00000015;2”, “user-callerid,”) in new stack