Confirm calls not working in certain situations

Using FreePBX 2.7.0.5, Confirm calls do not work when the call goes into a Queue and then fails over to a ring group that has a cell phone number. I am sure it works in every other instance.

For now I am just going to leave it alone because it will break it again. I’ll wait.

I updated one that I was testing it on and it broke it

It works great. I dropped in those three files and had to reload FreePBX and it worked great.

Thanks,

Derek

I am not super familiar with how the process works, but will future module updates, core updates, or freepbx upgrades be affected because I changed these files? If I run any of these future updates or upgrades could they break because I changed these file?

you can do a full file replacement if you grab them out of svn (from the proper version), or you can use patch, both are fine and if all you code is stock, grabbing the full file is probably easier.

#5011 - I filed the ticket for you.

this has been fixed (I think) in:

r11935

for 2.7 that is, it is not published yet. If you happen to know how to apply patches and could make the changes and test and provide feedback in the ticket that would be great, I’d prefer to hold off publishing the modules until there is some confirmation.

It has been applied to 2.7, 2.8 and 2.9

I was going to file the ticket today I just haven’t gotten around to it.
I am not familiar with applying the patches but I have an idea how to do it.

I just grab those three files and drop them in their appropriate locations or I could just go to those lines in those three files and edit them.

Is that right?

Updating the modules wont break anything? I haven’t updated because I am not sure if it will cause any issues. If updating the modules might fix the issue then I’ll give it a try.

FreePBX Framework 2.7.0.5 can update to 2.7.0.10
Core version 2.7.0.8 can update to 2.7.0.12
Asterisk Ver 1.6.2.10

Queues 2.7.0.6 can update to 2.7.0.7
Ring Groups 2.7.0.2 can update to 2.7.0.3

it’s a bug, you should file a ticket. We’ll probably fix it in 2.9, 2.8 and 2.7

yup looks like a bug,

please open a ticket on this and please include the FreePBX version, core version and Asterisk version that you are running.

The issue is that both M(confirm) and M(auto-blkvm) are tacked on to the dial options (the latter left for the queue). I had thought that the first one is what is executed and the last one is ignored. I don’t know if this has changed or has always been like this so need to have a closer look.

This is the working one when we go directly to the ring group

[Mar 24 07:30:27] VERBOSE[6092] chan_unistim.c: Reloading unistim.conf…
[Mar 24 07:30:27] VERBOSE[6092] config.c: == Parsing ‘/etc/asterisk/unistim.conf’: [Mar 24 07:30:27] VERBOSE[6092] config.c: == Found
[Mar 24 07:30:27] VERBOSE[14025] loader.c: – Reloading module ‘chan_mgcp.so’ (Media Gateway Control Protocol (MGCP))
[Mar 24 07:30:27] VERBOSE[6101] chan_mgcp.c: Reloading MGCP
[Mar 24 07:30:27] VERBOSE[14025] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[Mar 24 07:30:27] VERBOSE[5478] config.c: == Parsing ‘/etc/asterisk/sip_notify.conf’: [Mar 24 07:30:27] VERBOSE[5478] config.c: == Found
[Mar 24 07:30:27] VERBOSE[5478] config.c: == Parsing ‘/etc/asterisk/sip_notify_custom.conf’: [Mar 24 07:30:27] VERBOSE[5478] config.c: == Found
[Mar 24 07:30:27] VERBOSE[5478] config.c: == Parsing ‘/etc/asterisk/sip_notify_additional.conf’: [Mar 24 07:30:27] VERBOSE[5478] config.c: == Found
[Mar 24 07:30:35] VERBOSE[5478] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:30:35] VERBOSE[5478] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:1] Macro(“SIP/5560-00000c3c”, “user-callerid,”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:1] Set(“SIP/5560-00000c3c”, “AMPUSER=5560”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/5560-00000c3c”, “0?report”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/5560-00000c3c”, “1?Set(REALCALLERIDNUM=5560)”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:4] Set(“SIP/5560-00000c3c”, “AMPUSER=5560”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:5] Set(“SIP/5560-00000c3c”, “AMPUSERCIDNAME=Derek”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/5560-00000c3c”, “0?report”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:7] Set(“SIP/5560-00000c3c”, “AMPUSERCID=5560”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:8] Set(“SIP/5560-00000c3c”, “CALLERID(all)=“Derek” <5560>”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:9] ExecIf(“SIP/5560-00000c3c”, “0?Set(CHANNEL(language)=)”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:10] GotoIf(“SIP/5560-00000c3c”, “0?continue”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:11] Set(“SIP/5560-00000c3c”, “__TTL=64”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:12] GotoIf(“SIP/5560-00000c3c”, “1?continue”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Goto (macro-user-callerid,s,19)
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:19] NoOp(“SIP/5560-00000c3c”, “Using CallerID “Derek” <5560>”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/5560-00000c3c”, “1?skipdb”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Goto (from-internal,6001,4)
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:4] Set(“SIP/5560-00000c3c”, “__NODEST=”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:5] Set(“SIP/5560-00000c3c”, “__BLKVM_OVERRIDE=BLKVM/6001/SIP/5560-00000c3c”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:6] Set(“SIP/5560-00000c3c”, “__BLKVM_BASE=6001”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:7] Set(“SIP/5560-00000c3c”, “DB(BLKVM/6001/SIP/5560-00000c3c)=TRUE”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:8] Set(“SIP/5560-00000c3c”, “RRNODEST=”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:9] Set(“SIP/5560-00000c3c”, “__NODEST=6001”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:10] GosubIf(“SIP/5560-00000c3c”, “0?sub-rgsetcid,s,1”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:11] Set(“SIP/5560-00000c3c”, “RecordMethod=Group”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:12] Macro(“SIP/5560-00000c3c”, “record-enable,8013806353#,Group”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/5560-00000c3c”, “1?check”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/5560-00000c3c”, “0?MacroExit()”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/5560-00000c3c”, “1?Group:OUT”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Goto (macro-record-enable,s,6)
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:6] Set(“SIP/5560-00000c3c”, “LOOPCNT=1”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:7] Set(“SIP/5560-00000c3c”, “ITER=1”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:8] GotoIf(“SIP/5560-00000c3c”, “1?continue”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Goto (macro-record-enable,s,13)
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:13] Set(“SIP/5560-00000c3c”, “ITER=2”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:14] GotoIf(“SIP/5560-00000c3c”, “0?begin”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/5560-00000c3c”, “0?IN”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/5560-00000c3c”, “1?MacroExit()”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:13] Set(“SIP/5560-00000c3c”, “RingGroupMethod=ringall”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:14] Macro(“SIP/5560-00000c3c”, “dial-confirm,20,tr,8013806353#,6001”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:1] Set(“SIP/5560-00000c3c”, “DB(RG/6001/SIP/5560-00000c3c)=RINGING”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:2] Set(“SIP/5560-00000c3c”, “__UNIQCHAN=SIP/5560-00000c3c”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:3] Set(“SIP/5560-00000c3c”, “USE_CONFIRMATION=TRUE”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:4] Set(“SIP/5560-00000c3c”, “RINGGROUP_INDEX=6001”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:5] Set(“SIP/5560-00000c3c”, “ARG4=”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:6] Macro(“SIP/5560-00000c3c”, “dial,20,tr,8013806353#”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/5560-00000c3c”, “1?dial”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Goto (macro-dial,s,3)
[Mar 24 07:30:35] VERBOSE[16280] pbx.c: – Executing [[email protected]:3] AGI(“SIP/5560-00000c3c”, “dialparties.agi”) in new stack
[Mar 24 07:30:35] VERBOSE[16280] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: dialparties.agi: Caller ID name is ‘Derek’ number is ‘5560’
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: dialparties.agi: Methodology of ring is ‘ringall’
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: – dialparties.agi: Added extension 8013806353# to extension map
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: – dialparties.agi: Extension 8013806353# cf is disabled
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: – dialparties.agi: Filtered ARG3: 8013806353
[Mar 24 07:30:36] VERBOSE[16280] res_agi.c: – <SIP/5560-00000c3c>AGI Script dialparties.agi completed, returning 0
[Mar 24 07:30:36] VERBOSE[16280] pbx.c: – Executing [[email protected]:7] Dial(“SIP/5560-00000c3c”, “Local/RG-6001-8013806353#@from-internal,20,tr”) in new stack
[Mar 24 07:30:36] VERBOSE[16280] app_dial.c: – Called RG-6001-8013806353#@from-internal
[Mar 24 07:30:36] VERBOSE[16282] pbx.c: – Executing [RG-6001-8013806353#@from-internal:1] Macro(“Local/RG-6001-8013806353#@from-internal-6478;2”, “dial,20,M(confirm^^^6001)tr,8013806353#”) in new stack
[Mar 24 07:30:36] VERBOSE[16282] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/RG-6001-8013806353#@from-internal-6478;2”, “1?dial”) in new stack
[Mar 24 07:30:36] VERBOSE[16282] pbx.c: – Goto (macro-dial,s,3)
[Mar 24 07:30:36] VERBOSE[16282] pbx.c: – Executing [[email protected]:3] AGI(“Local/RG-6001-8013806353#@from-internal-6478;2”, “dialparties.agi”) in new stack
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: dialparties.agi: Caller ID name is ‘Derek’ number is ‘5560’
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: dialparties.agi: Methodology of ring is ‘none’
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: – dialparties.agi: Added extension 8013806353# to extension map
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: – dialparties.agi: Extension 8013806353# cf is disabled
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: – dialparties.agi: Filtered ARG3: 8013806353
[Mar 24 07:30:36] VERBOSE[16282] res_agi.c: – <Local/RG-6001-8013806353#@from-internal-6478;2>AGI Script dialparties.agi completed, returning 0
[Mar 24 07:30:36] VERBOSE[16282] pbx.c: – Executing [[email protected]:7] Dial(“Local/RG-6001-8013806353#@from-internal-6478;2”, “Local/[email protected]/n,20,M(confirm^^^6001)tr”) in new stack
[Mar 24 07:30:36] VERBOSE[16282] app_dial.c: – Called [email protected]/n
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:1] Macro(“Local/[email protected];2”, “user-callerid,SKIPTTL,”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “AMPUSER=5560”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:2] GotoIf(“Local/[email protected];2”, “1?report”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-user-callerid,s,10)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:10] GotoIf(“Local/[email protected];2”, “1?continue”) in new stack
[Mar 24 07:30:36] VERBOSE[16280] app_dial.c: – Local/RG-6001-8013806353#@from-internal-6478;1 is ringing
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-user-callerid,s,19)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:19] NoOp(“Local/[email protected];2”, “Using CallerID “Derek” <5560>”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];2”, “_NODEST=”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:3] Macro(“Local/[email protected];2”, “record-enable,5560,OUT,”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?check”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:4] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “0?Group:OUT”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-record-enable,s,15)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:15] GotoIf(“Local/[email protected];2”, “0?IN”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:17] NoOp(“Local/[email protected];2”, “Recording enable for 5560”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:18] Set(“Local/[email protected];2”, “CALLFILENAME=OUT5560-20110324-073036-1300973436.4119”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:19] Goto(“Local/[email protected];2”, “record”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-record-enable,s,23)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:23] MixMonitor(“Local/[email protected];2”, “OUT5560-20110324-073036-1300973436.4119.wav,”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:24] Set(“Local/[email protected];2”, “CDR(userfield)=audio:OUT5560-20110324-073036-1300973436.4119.wav”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:25] MacroExit(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:4] Macro(“Local/[email protected];2”, “dialout-trunk,3,8013806353,”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “DIAL_TRUNK=3”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:2] GosubIf(“Local/[email protected];2”, “0?sub-pincheck,s,1”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?disabletrunk,1”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “DIAL_NUMBER=8013806353”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:6] Set(“Local/[email protected];2”, “OUTBOUND_GROUP=OUT_3”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “1?nomax”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-dialout-trunk,s,9)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “0?skipoutcid”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:10] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:11] Macro(“Local/[email protected];2”, “outbound-callerid,3”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:1] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:2] ExecIf(“Local/[email protected];2”, “1?Set(REALCALLERIDNUM=5560)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?normcid”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “USEROUTCID=5560”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “0?bypass”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:6] Set(“Local/[email protected];2”, “USEROUTCID=8016695500”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected];2”, “EMERGENCYCID=”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:8] Set(“Local/[email protected];2”, “TRUNKOUTCID=8016695500”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “1?trunkcid”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Goto (macro-outbound-callerid,s,12)
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:12] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=8016695500)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:13] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=8016695500)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:14] ExecIf(“Local/[email protected];2”, “0?Set(CALLERID(all)=)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:12] ExecIf(“Local/[email protected];2”, “1?AGI(fixlocalprefix)”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
[Mar 24 07:30:36] VERBOSE[16285] app_mixmonitor.c: == Begin MixMonitor Recording Local/[email protected];2
[Mar 24 07:30:36] VERBOSE[16284] res_agi.c: – <Local/[email protected];2>AGI Script fixlocalprefix completed, returning 0
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:13] Set(“Local/[email protected];2”, “OUTNUM=8013806353”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:14] Set(“Local/[email protected];2”, “custom=SIP/FirstDigital”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:16] Macro(“Local/[email protected];2”, “dialout-trunk-predial-hook,”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:1] MacroExit(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:17] GotoIf(“Local/[email protected];2”, “0?bypass,1”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:18] GotoIf(“Local/[email protected];2”, “0?customtrunk”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] pbx.c: – Executing [[email protected]:19] Dial(“Local/[email protected];2”, “SIP/FirstDigital/8013806353,300,”) in new stack
[Mar 24 07:30:36] VERBOSE[16284] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:30:36] VERBOSE[16284] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:30:36] VERBOSE[16284] app_dial.c: – Called FirstDigital/8013806353
[Mar 24 07:30:37] VERBOSE[16284] app_dial.c: – SIP/FirstDigital-00000c3d is making progress passing it to Local/[email protected];2
[Mar 24 07:30:37] VERBOSE[16282] app_dial.c: – Local/[email protected];1 is making progress passing it to Local/RG-6001-8013806353#@from-internal-6478;2
[Mar 24 07:30:42] VERBOSE[16284] app_dial.c: – SIP/FirstDigital-00000c3d answered Local/[email protected];2
[Mar 24 07:30:42] VERBOSE[16282] app_dial.c: – Local/[email protected];1 answered Local/RG-6001-8013806353#@from-internal-6478;2
[Mar 24 07:30:42] VERBOSE[16282] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “LOOPCOUNT=0”) in new stack
[Mar 24 07:30:42] VERBOSE[16282] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “__MACRO_RESULT=ABORT”) in new stack
[Mar 24 07:30:42] VERBOSE[16282] pbx.c: – Executing [[email protected]:3] Set(“Local/[email protected];1”, “MSG1=“incoming-call-1-accept-2-decline””) in new stack
[Mar 24 07:30:42] VERBOSE[16282] pbx.c: – Executing [[email protected]:4] BackGround(“Local/[email protected];1”, “incoming-call-1-accept-2-decline,m,en,macro-confirm”) in new stack
[Mar 24 07:30:42] VERBOSE[16282] file.c: – <Local/[email protected];1> Playing ‘incoming-call-1-accept-2-decline.slin’ (language ‘en’)
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];1”, “0?toolate,1”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:2] NoOp(“Local/[email protected];1”, “Deleting: RG/6001/SIP/5560-00000c3c RINGING”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:3] NoOp(“Local/[email protected];1”, “Deleting: BLKVM/6001/SIP/5560-00000c3c TRUE”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];1”, “__MACRO_RESULT=”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:5] MacroExit(“Local/[email protected];1”, “”) in new stack
[Mar 24 07:30:46] VERBOSE[16280] app_dial.c: – Local/RG-6001-8013806353#@from-internal-6478;1 answered SIP/5560-00000c3c
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:1] Macro(“Local/RG-6001-8013806353#@from-internal-6478;2”, “hangupcall”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/RG-6001-8013806353#@from-internal-6478;2”, “1?skiprg”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Goto (macro-hangupcall,s,4)
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:4] GotoIf(“Local/RG-6001-8013806353#@from-internal-6478;2”, “1?skipblkvm”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Goto (macro-hangupcall,s,7)
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/RG-6001-8013806353#@from-internal-6478;2”, “1?theend”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Goto (macro-hangupcall,s,9)
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: – Executing [[email protected]:9] Hangup(“Local/RG-6001-8013806353#@from-internal-6478;2”, “”) in new stack
[Mar 24 07:30:46] VERBOSE[16282] app_macro.c: == Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘Local/RG-6001-8013806353#@from-internal-6478;2’ in macro ‘hangupcall’
[Mar 24 07:30:46] VERBOSE[16282] app_macro.c: == Spawn extension (macro-dial, s, 7) exited non-zero on ‘Local/RG-6001-8013806353#@from-internal-6478;2’ in macro ‘dial’
[Mar 24 07:30:46] VERBOSE[16282] pbx.c: == Spawn extension (from-internal, RG-6001-8013806353#, 1) exited non-zero on ‘Local/RG-6001-8013806353#@from-internal-6478;2’

Here is the CLi with just that one call.

[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:14] Set(“SIP/5560-00000c2e”, “custom=SIP/FirstDigital”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:15] ExecIf(“SIP/5560-00000c2e”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:16] Macro(“SIP/5560-00000c2e”, “dialout-trunk-predial-hook,”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:1] MacroExit(“SIP/5560-00000c2e”, “”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:17] GotoIf(“SIP/5560-00000c2e”, “0?bypass,1”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:18] GotoIf(“SIP/5560-00000c2e”, “0?customtrunk”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] pbx.c: – Executing [[email protected]:19] Dial(“SIP/5560-00000c2e”, “SIP/FirstDigital/8016695500,300,”) in new stack
[Mar 24 07:12:33] VERBOSE[8916] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:12:33] VERBOSE[8916] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:12:33] VERBOSE[8916] app_dial.c: – Called FirstDigital/8016695500
[Mar 24 07:12:34] VERBOSE[5478] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:12:34] VERBOSE[5478] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Set(“SIP/FirstDigital-00000c30”, “__FROM_DID=8016695500”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Gosub(“SIP/FirstDigital-00000c30”, “app-blacklist-check,s,1”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/FirstDigital-00000c30”, “0?blacklisted”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Set(“SIP/FirstDigital-00000c30”, “CALLED_BLACKLIST=1”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] Return(“SIP/FirstDigital-00000c30”, “”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/FirstDigital-00000c30”, “0 ?Set(CALLERID(name)=8016695500)”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “CALLERPRES()=allowed_not_screened”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] Goto(“SIP/FirstDigital-00000c30”, “timeconditions,1,1”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Goto (timeconditions,1,1)
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] GotoIfTime(“SIP/FirstDigital-00000c30”, “09:00-18:00,mon-fri,,?ivr-4,s,1”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Goto(“SIP/FirstDigital-00000c30”, “ivr-7,s,1”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Goto (ivr-7,s,1)
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Set(“SIP/FirstDigital-00000c30”, “MSG=custom/MD-Closed”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Set(“SIP/FirstDigital-00000c30”, “LOOPCOUNT=0”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] Set(“SIP/FirstDigital-00000c30”, “__DIR-CONTEXT=default”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “_IVR_CONTEXT_ivr-7=”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “_IVR_CONTEXT=ivr-7”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/FirstDigital-00000c30”, “0?begin”) in new stack
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:7] Answer(“SIP/FirstDigital-00000c30”, “”) in new stack
[Mar 24 07:12:34] VERBOSE[8916] app_dial.c: – SIP/FirstDigital-00000c2f answered SIP/5560-00000c2e
[Mar 24 07:12:34] VERBOSE[8920] pbx.c: – Executing [[email protected]:8] Wait(“SIP/FirstDigital-00000c30”, “1”) in new stack
[Mar 24 07:12:35] VERBOSE[8920] pbx.c: – Executing [[email protected]:9] Set(“SIP/FirstDigital-00000c30”, “TIMEOUT(digit)=3”) in new stack
[Mar 24 07:12:35] VERBOSE[8920] func_timeout.c: – Digit timeout set to 3.000
[Mar 24 07:12:35] VERBOSE[8920] pbx.c: – Executing [[email protected]:10] Set(“SIP/FirstDigital-00000c30”, “TIMEOUT(response)=5”) in new stack
[Mar 24 07:12:35] VERBOSE[8920] func_timeout.c: – Response timeout set to 5.000
[Mar 24 07:12:35] VERBOSE[8920] pbx.c: – Executing [[email protected]:11] Set(“SIP/FirstDigital-00000c30”, “__IVR_RETVM=”) in new stack
[Mar 24 07:12:35] VERBOSE[8920] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/FirstDigital-00000c30”, “1?Background(custom/MD-Closed)”) in new stack
[Mar 24 07:12:35] VERBOSE[8920] file.c: – <SIP/FirstDigital-00000c30> Playing ‘custom/MD-Closed.slin’ (language ‘en’)
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: == CDR updated on SIP/FirstDigital-00000c30
[Mar 24 07:12:42] WARNING[8920] func_db.c: DB_DELETE requires an argument, DB_DELETE(/)
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] NoOp(“SIP/FirstDigital-00000c30”, "Deleting: ") in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Set(“SIP/FirstDigital-00000c30”, “__NODEST=”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] Goto(“SIP/FirstDigital-00000c30”, “ext-queues,700,1”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Goto (ext-queues,700,1)
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Macro(“SIP/FirstDigital-00000c30”, “user-callerid,”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Set(“SIP/FirstDigital-00000c30”, “AMPUSER=8016695500”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/FirstDigital-00000c30”, “0?report”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/FirstDigital-00000c30”, “1?Set(REALCALLERIDNUM=8016695500)”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “AMPUSER=”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “AMPUSERCIDNAME=”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/FirstDigital-00000c30”, “1?report”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Goto (macro-user-callerid,s,10)
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:10] GotoIf(“SIP/FirstDigital-00000c30”, “0?continue”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:11] Set(“SIP/FirstDigital-00000c30”, “__TTL=64”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:12] GotoIf(“SIP/FirstDigital-00000c30”, “1?continue”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Goto (macro-user-callerid,s,19)
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:19] NoOp(“SIP/FirstDigital-00000c30”, “Using CallerID “MADKEY” <8016695500>”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Answer(“SIP/FirstDigital-00000c30”, “”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] Set(“SIP/FirstDigital-00000c30”, “__BLKVM_OVERRIDE=BLKVM/700/SIP/FirstDigital-00000c30”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “__BLKVM_BASE=700”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “DB(BLKVM/700/SIP/FirstDigital-00000c30)=TRUE”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] ExecIf(“SIP/FirstDigital-00000c30”, “1?Set(_DIAL_OPTIONS=trM(auto-blkvm))”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:7] Set(“SIP/FirstDigital-00000c30”, “__NODEST=700”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:8] Set(“SIP/FirstDigital-00000c30”, “MONITOR_FILENAME=/var/spool/asterisk/monitor/q700-20110324-071242-1300972354.4083”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:9] Set(“SIP/FirstDigital-00000c30”, “__CFIGNORE=TRUE”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:10] Set(“SIP/FirstDigital-00000c30”, “__FORWARD_CONTEXT=block-cf”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] pbx.c: – Executing [[email protected]:11] Queue(“SIP/FirstDigital-00000c30”, “700,tr,20”) in new stack
[Mar 24 07:12:42] VERBOSE[8920] app_queue.c: – Called Local/[email protected]/n
[Mar 24 07:12:42] VERBOSE[8920] app_queue.c: – Called Local/[email protected]/n
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “QAGENT=5523”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “QAGENT=5524”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:2] Goto(“Local/[email protected];2”, “700,1”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Goto (from-queue,700,1)
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] Goto(“Local/[email protected];2”, “from-queue-exten-internal,5523,1”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Goto (from-queue-exten-internal,5523,1)
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “RingGroupMethod=none”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:2] Macro(“Local/[email protected];2”, “record-enable,5523,IN”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?check”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]ble:4] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “0?Group:OUT”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Goto (macro-record-enable,s,15)
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:15] GotoIf(“Local/[email protected];2”, “1?IN”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Goto (macro-record-enable,s,20)
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:20] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:21] NoOp(“Local/[email protected];2”, “Recording enable for 5523”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:22] Set(“Local/[email protected];2”, “CALLFILENAME=20110324-071242-1300972362.4087”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:23] MixMonitor(“Local/[email protected];2”, “20110324-071242-1300972362.4087.wav,”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:24] Set(“Local/[email protected];2”, “CDR(userfield)=audio:20110324-071242-1300972362.4087.wav”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:25] MacroExit(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:3] Macro(“Local/[email protected];2”, “dial,trM(auto-blkvm),5523”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?dial”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Goto (macro-dial,s,3)
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:3] AGI(“Local/[email protected];2”, “dialparties.agi”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 24 07:12:42] VERBOSE[8923] app_mixmonitor.c: == Begin MixMonitor Recording Local/[email protected];2
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:2] Goto(“Local/[email protected];2”, “700,1”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Goto (from-queue,700,1)
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] Goto(“Local/[email protected];2”, “from-queue-exten-internal,5524,1”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Goto (from-queue-exten-internal,5524,1)
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “RingGroupMethod=none”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:2] Macro(“Local/[email protected];2”, “record-enable,5524,IN”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?check”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:4] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “0?Group:OUT”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Goto (macro-record-enable,s,15)
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:15] GotoIf(“Local/[email protected];2”, “1?IN”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Goto (macro-record-enable,s,20)
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:20] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:21] NoOp(“Local/[email protected];2”, “Recording enable for 5524”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:22] Set(“Local/[email protected];2”, “CALLFILENAME=20110324-071242-1300972362.4085”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:23] MixMonitor(“Local/[email protected];2”, “20110324-071242-1300972362.4085.wav,”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:24] Set(“Local/[email protected];2”, “CDR(userfield)=audio:20110324-071242-1300972362.4085.wav”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:25] MacroExit(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:3] Macro(“Local/[email protected];2”, “dial,trM(auto-blkvm),5524”) in new stack
[Mar 24 07:12:42] VERBOSE[8925] app_mixmonitor.c: == Begin MixMonitor Recording Local/[email protected];2
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?dial”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Goto (macro-dial,s,3)
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:3] AGI(“Local/[email protected];2”, “dialparties.agi”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: dialparties.agi: Caller ID name is ‘MADKEY’ number is ‘8016695500’
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: dialparties.agi: Methodology of ring is ‘none’
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – dialparties.agi: Added extension 5523 to extension map
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – dialparties.agi: Extension 5523 cf is disabled
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – dialparties.agi: Extension 5523 do not disturb is disabled
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – dialparties.agi: dbset CALLTRACE/5523 to 8016695500
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – dialparties.agi: Filtered ARG3: 5523
[Mar 24 07:12:42] VERBOSE[8922] res_agi.c: – <Local/[email protected];2>AGI Script dialparties.agi completed, returning 0
[Mar 24 07:12:42] VERBOSE[8922] pbx.c: – Executing [[email protected]:7] Dial(“Local/[email protected];2”, “SIP/5523,trM(auto-blkvm)”) in new stack
[Mar 24 07:12:42] VERBOSE[8922] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:12:42] VERBOSE[8922] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:12:42] VERBOSE[8922] app_dial.c: – Called 5523
[Mar 24 07:12:42] VERBOSE[8920] app_queue.c: – Local/[email protected];1 is ringing
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: dialparties.agi: Caller ID name is ‘MADKEY’ number is ‘8016695500’
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: dialparties.agi: Methodology of ring is ‘none’
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – dialparties.agi: Added extension 5524 to extension map
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – dialparties.agi: Extension 5524 cf is disabled
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – dialparties.agi: Extension 5524 do not disturb is disabled
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – dialparties.agi: dbset CALLTRACE/5524 to 8016695500
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – dialparties.agi: Filtered ARG3: 5524
[Mar 24 07:12:42] VERBOSE[8921] res_agi.c: – <Local/[email protected];2>AGI Script dialparties.agi completed, returning 0
[Mar 24 07:12:42] VERBOSE[8921] pbx.c: – Executing [[email protected]:7] Dial(“Local/[email protected];2”, “SIP/5524,trM(auto-blkvm)”) in new stack
[Mar 24 07:12:42] VERBOSE[8921] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:12:42] VERBOSE[8921] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:12:42] VERBOSE[8921] app_dial.c: – Called 5524
[Mar 24 07:12:42] VERBOSE[8920] app_queue.c: – Local/[email protected];1 is ringing
[Mar 24 07:12:42] VERBOSE[8922] app_dial.c: – SIP/5523-00000c31 is ringing
[Mar 24 07:12:42] VERBOSE[8920] app_queue.c: – Local/[email protected];1 is ringing
[Mar 24 07:12:42] VERBOSE[8921] app_dial.c: – SIP/5524-00000c32 is ringing
[Mar 24 07:12:42] VERBOSE[8920] app_queue.c: – Local/[email protected];1 is ringing
[Mar 24 07:13:03] VERBOSE[8920] app_queue.c: – Nobody picked up in 20000 ms
[Mar 24 07:13:03] VERBOSE[8920] app_queue.c: – Nobody picked up in 20000 ms
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:12] NoOp(“SIP/FirstDigital-00000c30”, “Deleting: BLKVM/700/SIP/FirstDigital-00000c30 TRUE”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:13] Set(“SIP/FirstDigital-00000c30”, “__NODEST=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:14] Set(“SIP/FirstDigital-00000c30”, “__CFIGNORE=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:15] Set(“SIP/FirstDigital-00000c30”, “__FORWARD_CONTEXT=from-internal”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:16] Goto(“SIP/FirstDigital-00000c30”, “ext-group,6001,1”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (ext-group,6001,1)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Macro(“SIP/FirstDigital-00000c30”, “user-callerid,”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Set(“SIP/FirstDigital-00000c30”, “AMPUSER=8016695500”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/FirstDigital-00000c30”, “0?report”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] ExecIf(“SIP/FirstDigital-00000c30”, “0?Set(REALCALLERIDNUM=8016695500)”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “AMPUSER=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “AMPUSERCIDNAME=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] GotoIf(“SIP/FirstDigital-00000c30”, “1?report”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (macro-user-callerid,s,10)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:10] GotoIf(“SIP/FirstDigital-00000c30”, “0?continue”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:11] Set(“SIP/FirstDigital-00000c30”, “__TTL=63”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:12] GotoIf(“SIP/FirstDigital-00000c30”, “1?continue”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (macro-user-callerid,s,19)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:19] NoOp(“SIP/FirstDigital-00000c30”, “Using CallerID “MADKEY” <8016695500>”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] GotoIf(“SIP/FirstDigital-00000c30”, “0?skipdb”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/FirstDigital-00000c30”, “0?skipov”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “__NODEST=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “__BLKVM_OVERRIDE=BLKVM/6001/SIP/FirstDigital-00000c30”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] Set(“SIP/FirstDigital-00000c30”, “__BLKVM_BASE=6001”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:7] Set(“SIP/FirstDigital-00000c30”, “DB(BLKVM/6001/SIP/FirstDigital-00000c30)=TRUE”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:8] Set(“SIP/FirstDigital-00000c30”, “RRNODEST=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:9] Set(“SIP/FirstDigital-00000c30”, “__NODEST=6001”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:10] GosubIf(“SIP/FirstDigital-00000c30”, “0?sub-rgsetcid,s,1”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:11] Set(“SIP/FirstDigital-00000c30”, “RecordMethod=Group”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:12] Macro(“SIP/FirstDigital-00000c30”, “record-enable,8013806353#,Group”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/FirstDigital-00000c30”, “1?check”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/FirstDigital-00000c30”, “0?MacroExit()”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] GotoIf(“SIP/FirstDigital-00000c30”, “1?Group:OUT”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (macro-record-enable,s,6)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] Set(“SIP/FirstDigital-00000c30”, “LOOPCNT=1”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:7] Set(“SIP/FirstDigital-00000c30”, “ITER=1”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:8] GotoIf(“SIP/FirstDigital-00000c30”, “1?continue”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (macro-record-enable,s,13)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:13] Set(“SIP/FirstDigital-00000c30”, “ITER=2”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:14] GotoIf(“SIP/FirstDigital-00000c30”, “0?begin”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/FirstDigital-00000c30”, “0?IN”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:16] ExecIf(“SIP/FirstDigital-00000c30”, “1?MacroExit()”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:13] Set(“SIP/FirstDigital-00000c30”, “RingGroupMethod=ringall”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:14] Macro(“SIP/FirstDigital-00000c30”, “dial-confirm,20,trM(auto-blkvm),8013806353#,6001”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Set(“SIP/FirstDigital-00000c30”, “DB(RG/6001/SIP/FirstDigital-00000c30)=RINGING”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] Set(“SIP/FirstDigital-00000c30”, “__UNIQCHAN=SIP/FirstDigital-00000c30”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] Set(“SIP/FirstDigital-00000c30”, “USE_CONFIRMATION=TRUE”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:4] Set(“SIP/FirstDigital-00000c30”, “RINGGROUP_INDEX=6001”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:5] Set(“SIP/FirstDigital-00000c30”, “ARG4=”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:6] Macro(“SIP/FirstDigital-00000c30”, “dial,20,trM(auto-blkvm),8013806353#”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/FirstDigital-00000c30”, “1?dial”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Goto (macro-dial,s,3)
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:3] AGI(“SIP/FirstDigital-00000c30”, “dialparties.agi”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 24 07:13:03] VERBOSE[8922] app_macro.c: == Spawn extension (macro-dial, s, 7) exited non-zero on ‘Local/[email protected];2’ in macro ‘dial’
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: == Spawn extension (from-queue-exten-internal, 5523, 3) exited non-zero on ‘Local/[email protected];2’
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] Macro(“Local/[email protected];2”, “hangupcall,”) in new stack
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?skiprg”) in new stack
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Goto (macro-hangupcall,s,4)
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Executing [[email protected]:4] GotoIf(“Local/[email protected];2”, “1?skipblkvm”) in new stack
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Goto (macro-hangupcall,s,7)
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “1?theend”) in new stack
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Goto (macro-hangupcall,s,9)
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: – Executing [[email protected]:9] Hangup(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:13:03] VERBOSE[8922] app_macro.c: == Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘Local/[email protected];2’ in macro ‘hangupcall’
[Mar 24 07:13:03] VERBOSE[8922] pbx.c: == Spawn extension (from-queue-exten-internal, h, 1) exited non-zero on ‘Local/[email protected];2’
[Mar 24 07:13:03] VERBOSE[8921] app_macro.c: == Spawn extension (macro-dial, s, 7) exited non-zero on ‘Local/[email protected];2’ in macro ‘dial’
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: == Spawn extension (from-queue-exten-internal, 5524, 3) exited non-zero on ‘Local/[email protected];2’
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] Macro(“Local/[email protected];2”, “hangupcall,”) in new stack
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?skiprg”) in new stack
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Goto (macro-hangupcall,s,4)
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Executing [[email protected]:4] GotoIf(“Local/[email protected];2”, “1?skipblkvm”) in new stack
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Goto (macro-hangupcall,s,7)
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “1?theend”) in new stack
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Goto (macro-hangupcall,s,9)
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: – Executing [[email protected]:9] Hangup(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:13:03] VERBOSE[8921] app_macro.c: == Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘Local/[email protected];2’ in macro ‘hangupcall’
[Mar 24 07:13:03] VERBOSE[8921] pbx.c: == Spawn extension (from-queue-exten-internal, h, 1) exited non-zero on ‘Local/[email protected];2’
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: dialparties.agi: Caller ID name is ‘MADKEY’ number is ‘8016695500’
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: dialparties.agi: Methodology of ring is ‘ringall’
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: – dialparties.agi: Added extension 8013806353# to extension map
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: – dialparties.agi: Extension 8013806353# cf is disabled
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: – dialparties.agi: Filtered ARG3: 8013806353
[Mar 24 07:13:03] VERBOSE[8920] res_agi.c: – <SIP/FirstDigital-00000c30>AGI Script dialparties.agi completed, returning 0
[Mar 24 07:13:03] VERBOSE[8920] pbx.c: – Executing [[email protected]:7] Dial(“SIP/FirstDigital-00000c30”, “Local/RG-6001-8013806353#@from-internal,20,trM(auto-blkvm)”) in new stack
[Mar 24 07:13:03] VERBOSE[8920] app_dial.c: – Called RG-6001-8013806353#@from-internal
[Mar 24 07:13:03] VERBOSE[8928] pbx.c: – Executing [RG-6001-8013806353#@from-internal:1] Macro(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “dial,20,M(confirm^^^6001)trM(auto-blkvm),8013806353#”) in new stack
[Mar 24 07:13:03] VERBOSE[8928] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “1?dial”) in new stack
[Mar 24 07:13:03] VERBOSE[8928] pbx.c: – Goto (macro-dial,s,3)
[Mar 24 07:13:03] VERBOSE[8928] pbx.c: – Executing [[email protected]:3] AGI(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “dialparties.agi”) in new stack
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: dialparties.agi: Caller ID name is ‘MADKEY’ number is ‘8016695500’
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: dialparties.agi: Methodology of ring is ‘none’
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: – dialparties.agi: Added extension 8013806353# to extension map
[Mar 24 07:13:03] VERBOSE[8923] app_mixmonitor.c: == End MixMonitor Recording Local/[email protected];2
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: – dialparties.agi: Extension 8013806353# cf is disabled
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: – dialparties.agi: Filtered ARG3: 8013806353
[Mar 24 07:13:03] VERBOSE[8928] res_agi.c: – <Local/RG-6001-8013806353#@from-internal-6d8a;2>AGI Script dialparties.agi completed, returning 0
[Mar 24 07:13:03] VERBOSE[8928] pbx.c: – Executing [[email protected]:7] Dial(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “Local/[email protected]/n,20,M(confirm^^^6001)trM(auto-blkvm)”) in new stack
[Mar 24 07:13:03] VERBOSE[8925] app_mixmonitor.c: == End MixMonitor Recording Local/[email protected];2
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:1] Macro(“Local/[email protected];2”, “user-callerid,SKIPTTL,”) in new stack
[Mar 24 07:13:03] VERBOSE[8928] app_dial.c: – Called [email protected]/n
[Mar 24 07:13:03] VERBOSE[8920] app_dial.c: – Local/RG-6001-8013806353#@from-internal-6d8a;1 is ringing
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “AMPUSER=8016695500”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:2] GotoIf(“Local/[email protected];2”, “1?report”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-user-callerid,s,10)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:10] GotoIf(“Local/[email protected];2”, “1?continue”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-user-callerid,s,19)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:19] NoOp(“Local/[email protected];2”, “Using CallerID “MADKEY” <8016695500>”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];2”, “_NODEST=”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:3] Macro(“Local/[email protected];2”, “record-enable,8016695500,OUT,”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “1?check”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-record-enable,s,4)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:4] ExecIf(“Local/[email protected];2”, “0?MacroExit()”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “0?Group:OUT”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-record-enable,s,15)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:15] GotoIf(“Local/[email protected];2”, “0?IN”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “1?MacroExit()”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:4] Macro(“Local/[email protected];2”, “dialout-trunk,3,8013806353,”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “DIAL_TRUNK=3”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:2] GosubIf(“Local/[email protected];2”, “0?sub-pincheck,s,1”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?disabletrunk,1”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “DIAL_NUMBER=8013806353”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:6] Set(“Local/[email protected];2”, “OUTBOUND_GROUP=OUT_3”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “1?nomax”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-dialout-trunk,s,9)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “0?skipoutcid”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:10] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:11] Macro(“Local/[email protected];2”, “outbound-callerid,3”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:1] ExecIf(“Local/[email protected];2”, “1?Set(CALLERPRES()=allowed_not_screened)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:2] ExecIf(“Local/[email protected];2”, “1?Set(REALCALLERIDNUM=8016695500)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?normcid”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “USEROUTCID=8016695500”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “1?bypass”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-outbound-callerid,s,7)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected];2”, “EMERGENCYCID=”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:8] Set(“Local/[email protected];2”, “TRUNKOUTCID=8016695500”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “1?trunkcid”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Goto (macro-outbound-callerid,s,12)
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:12] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=8016695500)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:13] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=8016695500)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:14] ExecIf(“Local/[email protected];2”, “0?Set(CALLERID(all)=)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:12] ExecIf(“Local/[email protected];2”, “1?AGI(fixlocalprefix)”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
[Mar 24 07:13:03] VERBOSE[8930] res_agi.c: – <Local/[email protected];2>AGI Script fixlocalprefix completed, returning 0
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:13] Set(“Local/[email protected];2”, “OUTNUM=8013806353”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:14] Set(“Local/[email protected];2”, “custom=SIP/FirstDigital”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:16] Macro(“Local/[email protected];2”, “dialout-trunk-predial-hook,”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:1] MacroExit(“Local/[email protected];2”, “”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:17] GotoIf(“Local/[email protected];2”, “0?bypass,1”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:18] GotoIf(“Local/[email protected];2”, “0?customtrunk”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] pbx.c: – Executing [[email protected]:19] Dial(“Local/[email protected];2”, “SIP/FirstDigital/8013806353,300,”) in new stack
[Mar 24 07:13:03] VERBOSE[8930] netsock.c: == Using SIP RTP TOS bits 184
[Mar 24 07:13:03] VERBOSE[8930] netsock.c: == Using SIP RTP CoS mark 5
[Mar 24 07:13:03] VERBOSE[8930] app_dial.c: – Called FirstDigital/8013806353
[Mar 24 07:13:05] VERBOSE[8930] app_dial.c: – SIP/FirstDigital-00000c33 is making progress passing it to Local/[email protected];2
[Mar 24 07:13:05] VERBOSE[8928] app_dial.c: – Local/[email protected];1 is making progress passing it to Local/RG-6001-8013806353#@from-internal-6d8a;2
[Mar 24 07:13:16] VERBOSE[8930] app_dial.c: – SIP/FirstDigital-00000c33 answered Local/[email protected];2
[Mar 24 07:13:16] VERBOSE[8928] app_dial.c: – Local/[email protected];1 answered Local/RG-6001-8013806353#@from-internal-6d8a;2
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “__MACRO_RESULT=”) in new stack
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:2] NoOp(“Local/[email protected];1”, “Deleting: BLKVM/6001/SIP/FirstDigital-00000c30 TRUE”) in new stack
[Mar 24 07:13:16] VERBOSE[8920] app_dial.c: – Local/RG-6001-8013806353#@from-internal-6d8a;1 answered SIP/FirstDigital-00000c30
[Mar 24 07:13:16] VERBOSE[8920] pbx.c: – Executing [[email protected]:1] Set(“Local/RG-6001-8013806353#@from-internal-6d8a;1”, “__MACRO_RESULT=”) in new stack
[Mar 24 07:13:16] VERBOSE[8920] pbx.c: – Executing [[email protected]:2] NoOp(“Local/RG-6001-8013806353#@from-internal-6d8a;1”, "Deleting: BLKVM/6001/SIP/FirstDigital-00000c30 ") in new stack
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:1] Macro(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “hangupcall”) in new stack
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “1?skiprg”) in new stack
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Goto (macro-hangupcall,s,4)
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:4] GotoIf(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “1?skipblkvm”) in new stack
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Goto (macro-hangupcall,s,7)
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “1?theend”) in new stack
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Goto (macro-hangupcall,s,9)
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: – Executing [[email protected]:9] Hangup(“Local/RG-6001-8013806353#@from-internal-6d8a;2”, “”) in new stack
[Mar 24 07:13:16] VERBOSE[8928] app_macro.c: == Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘Local/RG-6001-8013806353#@from-internal-6d8a;2’ in macro ‘hangupcall’
[Mar 24 07:13:16] VERBOSE[8928] app_macro.c: == Spawn extension (macro-dial, s, 7) exited non-zero on ‘Local/RG-6001-8013806353#@from-internal-6d8a;2’ in macro ‘dial’
[Mar 24 07:13:16] VERBOSE[8928] pbx.c: == Spawn extension (from-internal, RG-6001-8013806353#, 1) exited non-zero on ‘Local/RG-6001-8013806353#@from-internal-6d8a;2’

Can you please paste a CLI trace of the flow from a call coming into the the IVR all the way to the call attempt by the ringgroup.

If possible, change the ringgroup so that there is only a single number in it, the one that the confirm call is not working with, otherwise it can be really hard to follow the trace if there are several numbers in it.

In addition, as much as you can help it, try to not have any other calls going on the system at the time for the same reasons, trying to follow the trace.

Only time confirm calls doesn’t work
-IVR -> Queue ->Queue_Failover_destination(Ringgroup) -> Ringgroup
–The ringgroup has the number with a # at the end. e.g. 5554446687#

The Ringgroup has a check next to confirm Calls:
The confirm calls works when going directly to the ringgroup or calling the ringgroup directly. It works when going through the IVR directly to the ringgroup.

are you saying the specific scenario that is broken is:

inbound_call -> Queue -> Queue_Failover_Destination(Ringgroup) -> Ringgroup

and then within the ringgoup, you have it coded to confirm calls, but the call confirmation is not being triggered?

If that is correct, first off, is the number being dialed in the ringgroup an extension on the system or an outside number postpended with ‘#’ because internal extensions do not result in confirmation unless you also put ‘#’ at the end.

Another way to pose the above question, what happens if you just send the inbound call directly to the ringgroup? Is the behavior the same or does it confirm the calls in that case?