Configure Analog Central

Dear

A support requires to configure 01 analog telephone exchange.

I have 01 Sangoma B600 card.

My question is what would be the steps to configure this card ?.

Thanks for the support

The short answer is DAHDI. The DAHDI config module should recognize the card. After that, you set up a DAHDI extension and point the extension number to the port on the DAHDI card.

https://wiki.freepbx.org/display/PC/Telephony+Cards+for+Asterisk should get you started. If you have questions, come back and we’ll talk you through whatever you are having a problem with.

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.