Looking for help with Cisco phone customization, 7942 & 7962, on the auto-answer issue. I want the phone to auto-answer only internal calls, not all calls. If interested please send a private message.
Thanks
KJN
I would not waste your money. The phones don’t respond to the SIP auto answer header. If you have discovered something share it with the community, somebody may finish the work for you.
Those phones do support auto answer with chan_sccp2 using sccp protocol.
redacted
SkykingOH, I saw your posts on the Trixbox forum. I need help getting a few 7942s to register to my system. Already bricked one. Think I pulled the plug during an update. Arg.
I saw that you offer your Cisco services. I am at [email protected] if you can help.
I’ve successfully loaded SIP42.8-3-3SR2S on a new 7942. In my /tftpboot/ on a FreePBX 2.10 I have the following:
rw-r–r-- 1 root root 2496963 Nov 5 2007 apps42.8-3-3ES2.sbn
-rw-r–r-- 1 root root 585562 Nov 5 2007 cnu42.8-3-3ES2.sbn
-rw-r–r-- 1 root root 2816280 Nov 5 2007 cvm42sip.8-3-3ES2.sbn
-rw-r–r-- 1 root root 189 Jun 16 12:06 dialplan.xml
-rw-r–r-- 1 root root 326315 Nov 5 2007 dsp42.8-3-3ES2.sbn
-rw-r–r-- 1 root root 445653 Nov 5 2007 jar42sip.8-3-3ES2.sbn
-rw-r–r-- 1 root root 202 Jun 15 11:16 RINGLIST.DAT
-rw-r–r-- 1 root root 5345 Jun 16 12:03 SEP3CCE73ADE037.cnf.xml
-rw-r–r-- 1 root root 660 Nov 5 2007 SIP42.8-3-3SR2S.loads
-rw-r–r-- 1 root root 660 Nov 5 2007 term42.default.loads
-rw-r–r-- 1 root root 660 Nov 5 2007 term62.default.loads
-rw-r–r-- 1 root root 1110 Jun 16 11:52 XMLDefault.cnf.xml
In the loads section of my mac.cnf.xml I tell it to take SIP42.8-3-3SR2S (contents pasted below)
A tail of my tftp gives me this. I just stops at the dialplan. The phone does not attempt to register to my PBX. A rasterisk shows no hit.
Jun 16 12:15:31 scs xinetd[5597]: START: tftp pid=7241 from=63.xxx.xxx.xxx
Jun 16 12:15:31 scs in.tftpd[7242]: RRQ from 63.xxx.xxx.xxx filename CTLSEP3CCE73ADE037.tlv
Jun 16 12:15:31 scs in.tftpd[7242]: sending NAK (1, File not found) to 63.xxx.xxx.xxx
Jun 16 12:15:31 scs in.tftpd[7243]: RRQ from 63.xxx.xxx.xxx filename SEP3CCE73ADE037.cnf.xml
Jun 16 12:15:36 scs in.tftpd[7259]: RRQ from 63.xxx.xxx.xxx filename /mk-sip.jar
Jun 16 12:15:36 scs in.tftpd[7259]: sending NAK (1, File not found) to 63.xxx.xxx.xxx
Jun 16 12:15:37 scs in.tftpd[7260]: RRQ from 63.xxx.xxx.xxx filename /g3-tones.xml
Jun 16 12:15:37 scs in.tftpd[7260]: sending NAK (1, File not found) to 63.xxx.xxx.xxx
Jun 16 12:15:38 scs in.tftpd[7266]: RRQ from 63.xxx.xxx.xxx filename dialplan.xml
Here is my mac.cnf.xml:
<?xml version="1.0" encoding="UTF-8"?>- SIP admin admin - - D/M/Y America/Phoenix - - 208.77.63.254 Unicast - - - - - 2000 5060 5060 sip107.myserver.com - - true - true x–serviceuri-cfwdall x-cisco-serviceuri-pickup x-cisco-serviceuri-opickup x-cisco-serviceuri-gpickup x-cisco-serviceuri-meetme x-cisco-serviceuri-abbrdial false 2 true true 2 2 0 true - 6 10 180 3600 5 120 120 5 500 4000 70 false None 1 false true false false g711ulaw false 3100 - - 9 3100 140.44.44.444 5060 3100 3100 - 2 3 3100 ab123456789 false 1 *97 4 5 3100 - true false false true - 9 3100 140.44.44.444 5060 3100 3100 - 2 3 3100 ab123456789 false 1 *97 4 5 3100 - true false false true dialplan.xml - true 2 SIP42.8-3-3SR2S C:\Users\SCS1\Desktop\7941SIP804 C:\Users\SCS1\Desktop\7941SIP804
Franklin
Please do not hijack a thread that was about auto answer asking for help on getting your phones to register. It is not nice and will just piss the people off who do help out here and will cause your request to be ignored.