Chiamate in ingresso

Buongiorno

Ho un raspberry pi4 con Asterisk ultima versione, eseguito upgrade.
Creato due interni con Zoiper, uno su PC l altro su smartphone. Tra interni tutto OK
Configurato trunk con Messagenet. Le chiamate in uscita OK. Le chiamate in ingresso configurate per far squillare interno non và. O meglio arriva la chiamata su Freebpx ma non squilla interno. Mi sono accorto di questo errore… ma l’ interno è un PJSIP

[2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
413 [2021-07-18 12:43:16] VERBOSE[13956][C-00000002] pbx.c: Executing [s@macro-exten-vm:12] ExecIf(“SIP/IN_Messagenet-00000001”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
414 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
415 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
416 [2021-07-18 12:43:16] VERBOSE[13956][C-00000002] pbx.c: Executing [s@macro-exten-vm:13] ExecIf(“SIP/IN_Messagenet-00000001”, “0?MacroExit()”) in new stack
417 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
418 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
419 [2021-07-18 12:43:16] VERBOSE[13956][C-00000002] pbx.c: Executing [s@macro-exten-vm:14] ExecIf(“SIP/IN_Messagenet-00000001”, “0?Gosub(ext-intercom,*80200,1())”) in new stack
420 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
421 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
422 [2021-07-18 12:43:16] VERBOSE[13956][C-00000002] pbx.c: Executing [s@macro-exten-vm:15] ExecIf(“SIP/IN_Messagenet-00000001”, “0?MacroExit()”) in new stack
423 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
424 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
425 [2021-07-18 12:43:16] VERBOSE[13956][C-00000002] pbx.c: Executing [s@macro-exten-vm:16] ExecIf(“SIP/IN_Messagenet-00000001”, “0?ChanSpy(PJSIP/200,q)”) in new stack
426 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
427 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
428 [2021-07-18 12:43:16] VERBOSE[13956][C-00000002] pbx.c: Executing [s@macro-exten-vm:17] ExecIf(“SIP/IN_Messagenet-00000001”, “0?MacroExit()”) in new stack
429 [2021-07-18 12:43:16] ERROR[13956][C-00000002] res_pjsip_header_funcs.c: This function requires a PJSIP channel.

Forse ho capito, la chiamata arriva in SIP e l’ interno e PJSIP ?

1 Like

PJSIP / CHAN_SIP non è un problema.

Se la chiamata raggiunge il PBX, verifica che l’interno sia correttamente registrato e se lo è, la regola di Inbound Route deve sicuramente portarti all’interno da far squillare, se opportunamente configurato.

Chan_SIP e PJSIP sono due protocolli per gestire il SIP: prova magari ad usare solo PJSIP. Dalla prossima versione del PBX Chan_SIP verrà disabilitato di default.

Ora gira tutto.
thank

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.