Cant get outbound route through Digium FXO card to work

wbreen045 · October 25, 2021, 10:44am

On the advice from another thread I did go ahead and build a new FreePBX box with Version 15. I installed the Digium/Sangoma 8 port FXO card, and actually had it working for a bit…However we have a bit of a weird setup here, at least it seems that way to me as I cant find anyone talking about this configuration. for our inbound call/routes we have 3 SIP trunks, for our outbound calls I have 7 POTS lines. I cant get any calls to out side the building. What may I provide you guys with to better explain this. Sorry very new to FreePBX and SIP in general. Thanks in advance!

this is what I get on trying to dial out from the log, hope this is not too much
85131 [2021-10-25 06:28:05] VERBOSE[2802] netsock2.c: Using SIP RTP Audio CoS mark 5
85132 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:1] Macro(“PJSIP/2103-00000000”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
85133 [2021-10-25 06:28:05] WARNING[3818][C-00000001] app_macro.c: Macro() is deprecated and will be removed from a future version of Asterisk.
85134 [2021-10-25 06:28:05] WARNING[3818][C-00000001] app_macro.c: Dialplan should be updated to use Gosub instead.
85135 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:1] Set(“PJSIP/2103-00000000”, “TOUCH_MONITOR=1635161285.0”) in new stack
85136 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:2] Set(“PJSIP/2103-00000000”, “CHANCONTEXT=”) in new stack
85137 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:3] Set(“PJSIP/2103-00000000”, “CHANCONTEXT=”) in new stack
85138 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:4] Set(“PJSIP/2103-00000000”, “CHANEXTENCONTEXT=2103-00000000”) in new stack
85139 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:5] Set(“PJSIP/2103-00000000”, “CHANEXTEN=2103-00000000”) in new stack
85140 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:6] Set(“PJSIP/2103-00000000”, “CALLERID(number)=2103”) in new stack
85141 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:7] Set(“PJSIP/2103-00000000”, “AMPUSER=2103”) in new stack
85142 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:8] Set(“PJSIP/2103-00000000”, “HOTDESCKCHAN=2103-00000000”) in new stack
85143 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:9] Set(“PJSIP/2103-00000000”, “HOTDESKEXTEN=2103”) in new stack
85144 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:10] Set(“PJSIP/2103-00000000”, “HOTDESKCALL=0”) in new stack
85145 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:11] ExecIf(“PJSIP/2103-00000000”, “0?Set(HOTDESKCALL=1)”) in new stack
85146 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:12] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(name)=)”) in new stack
85147 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:13] GotoIf(“PJSIP/2103-00000000”, “0?report”) in new stack
85148 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:14] ExecIf(“PJSIP/2103-00000000”, “1?Set(REALCALLERIDNUM=2103)”) in new stack
85149 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:15] Set(“PJSIP/2103-00000000”, “AMPUSER=2103”) in new stack
85150 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:16] GotoIf(“PJSIP/2103-00000000”, “0?limit”) in new stack
85151 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:17] Set(“PJSIP/2103-00000000”, “AMPUSERCIDNAME=William Breen”) in new stack
85152 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:18] ExecIf(“PJSIP/2103-00000000”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
85153 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:19] GotoIf(“PJSIP/2103-00000000”, “0?report”) in new stack
85154 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:20] Set(“PJSIP/2103-00000000”, “AMPUSERCID=2103”) in new stack
85155 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:21] Set(“PJSIP/2103-00000000”, “__DIAL_OPTIONS=HhTtr”) in new stack
85156 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:22] Set(“PJSIP/2103-00000000”, “CALLERID(all)=“William Breen” <2103>”) in new stack
85157 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:23] ExecIf(“PJSIP/2103-00000000”, “0?Set(CUSDIAL=)”) in new stack
85158 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:24] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(all)=“William Breen” <2103>)”) in new stack
85159 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:25] GotoIf(“PJSIP/2103-00000000”, “0?limit”) in new stack
85160 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:26] ExecIf(“PJSIP/2103-00000000”, “1?Set(GROUP(concurrency_limit)=2103)”) in new stack
85161 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:27] ExecIf(“PJSIP/2103-00000000”, “1?Set(CHANNEL(language)=en)”) in new stack
85162 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:28] NoOp(“PJSIP/2103-00000000”, “Macro Depth is 1”) in new stack
85163 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:29] GotoIf(“PJSIP/2103-00000000”, “1?report2:macroerror”) in new stack
85164 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (macro-user-callerid,s,30)
85165 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:30] GotoIf(“PJSIP/2103-00000000”, “1?continue”) in new stack
85166 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (macro-user-callerid,s,49)
85167 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:49] Set(“PJSIP/2103-00000000”, “CALLERID(number)=2103”) in new stack
85168 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:50] Set(“PJSIP/2103-00000000”, “CALLERID(name)=William Breen”) in new stack
85169 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:51] GotoIf(“PJSIP/2103-00000000”, “0?cnum”) in new stack
85170 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:52] Set(“PJSIP/2103-00000000”, “CDR(cnam)=William Breen”) in new stack
85171 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:53] Set(“PJSIP/2103-00000000”, “CDR(cnum)=2103”) in new stack
85172 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-user-callerid:54] Set(“PJSIP/2103-00000000”, “CHANNEL(language)=en”) in new stack
85173 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:2] Gosub(“PJSIP/2103-00000000”, “sub-record-check,s,1(out,12247302621,dontcare)”) in new stack
85174 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:1] GotoIf(“PJSIP/2103-00000000”, “0?initialized”) in new stack
85175 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:2] Set(“PJSIP/2103-00000000”, “__REC_STATUS=INITIALIZED”) in new stack
85176 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:3] Set(“PJSIP/2103-00000000”, “NOW=1635161285”) in new stack
85177 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:4] Set(“PJSIP/2103-00000000”, “__DAY=25”) in new stack
85178 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:5] Set(“PJSIP/2103-00000000”, “__MONTH=10”) in new stack
85179 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:6] Set(“PJSIP/2103-00000000”, “__YEAR=2021”) in new stack
85180 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:7] Set(“PJSIP/2103-00000000”, “__TIMESTR=20211025-062805”) in new stack
85181 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:8] Set(“PJSIP/2103-00000000”, “__FROMEXTEN=2103”) in new stack
85182 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:9] Set(“PJSIP/2103-00000000”, “__MON_FMT=wav”) in new stack
85183 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:10] NoOp(“PJSIP/2103-00000000”, “Recordings initialized”) in new stack
85184 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:11] ExecIf(“PJSIP/2103-00000000”, “0?Set(ARG3=dontcare)”) in new stack
85185 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:12] Set(“PJSIP/2103-00000000”, “REC_POLICY_MODE_SAVE=”) in new stack
85186 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:13] ExecIf(“PJSIP/2103-00000000”, “0?Set(REC_STATUS=NO)”) in new stack
85187 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:14] GotoIf(“PJSIP/2103-00000000”, “3?checkaction”) in new stack
85188 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (sub-record-check,s,17)
85189 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-record-check:17] GotoIf(“PJSIP/2103-00000000”, “1?sub-record-check,out,1”) in new stack
85190 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (sub-record-check,out,1)
85191 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [out@sub-record-check:1] NoOp(“PJSIP/2103-00000000”, “Outbound Recording Check from 2103 to 12247302621”) in new stack
85192 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [out@sub-record-check:2] Set(“PJSIP/2103-00000000”, “RECMODE=dontcare”) in new stack
85193 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [out@sub-record-check:3] ExecIf(“PJSIP/2103-00000000”, “1?Goto(routewins)”) in new stack
85194 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (sub-record-check,out,7)
85195 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [out@sub-record-check:7] Gosub(“PJSIP/2103-00000000”, “recordcheck,1(dontcare,out,12247302621)”) in new stack
85196 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp(“PJSIP/2103-00000000”, “Starting recording check against dontcare”) in new stack
85197 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [recordcheck@sub-record-check:2] Goto(“PJSIP/2103-00000000”, “dontcare”) in new stack
85198 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
85199 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [recordcheck@sub-record-check:3] Return(“PJSIP/2103-00000000”, “”) in new stack
85200 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [out@sub-record-check:8] Return(“PJSIP/2103-00000000”, “”) in new stack
85201 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:3] ExecIf(“PJSIP/2103-00000000”, “0 ?Set(CDR(accountcode)=)”) in new stack
85202 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:4] Set(“PJSIP/2103-00000000”, “_ROUTEID=4”) in new stack
85203 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:5] Set(“PJSIP/2103-00000000”, “_ROUTENAME=SEAC-OUTBOUND”) in new stack
85204 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:6] Set(“PJSIP/2103-00000000”, “MOHCLASS=default”) in new stack
85205 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:7] ExecIf(“PJSIP/2103-00000000”, “0?Set(TRUNKCIDOVERRIDE=7739896927)”) in new stack
85206 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:8] Set(“PJSIP/2103-00000000”, “_CALLERIDNAMEINTERNAL=William Breen”) in new stack
85207 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:9] Set(“PJSIP/2103-00000000”, “_CALLERIDNUMINTERNAL=2103”) in new stack
85208 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:10] Set(“PJSIP/2103-00000000”, “_EMAILNOTIFICATION=FALSE”) in new stack
85209 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:11] Set(“PJSIP/2103-00000000”, “_NODEST=”) in new stack
85210 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [12247302621@from-internal:12] Macro(“PJSIP/2103-00000000”, “dialout-trunk,1,12247302621,off”) in new stack
85211 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:1] Set(“PJSIP/2103-00000000”, “DIAL_TRUNK=1”) in new stack
85212 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:2] ExecIf(“PJSIP/2103-00000000”, “0?Set(DIAL_OPTIONS=Hhtr)”) in new stack
85213 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:3] GosubIf(“PJSIP/2103-00000000”, “0?sub-pincheck,s,1()”) in new stack
85214 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:4] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(num)=2103)”) in new stack
85215 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:5] GotoIf(“PJSIP/2103-00000000”, “0?disabletrunk,1”) in new stack
85216 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:6] Set(“PJSIP/2103-00000000”, “DIAL_NUMBER=12247302621”) in new stack
85217 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:7] Set(“PJSIP/2103-00000000”, “DIAL_TRUNK_OPTIONS=HhTtr”) in new stack
85218 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:8] Set(“PJSIP/2103-00000000”, “OUTBOUND_GROUP=OUT_1”) in new stack
85219 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:9] Set(“PJSIP/2103-00000000”, “DIAL_TRUNK_OPTIONS=T”) in new stack
85220 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:10] GotoIf(“PJSIP/2103-00000000”, “0?nomax”) in new stack
85221 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:11] GotoIf(“PJSIP/2103-00000000”, “0?chanfull”) in new stack
85222 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:12] GotoIf(“PJSIP/2103-00000000”, “0?skipoutcid”) in new stack
85223 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:13] Macro(“PJSIP/2103-00000000”, “outbound-callerid,1”) in new stack
85224 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:1] NoOp(“PJSIP/2103-00000000”, “2103”) in new stack
85225 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:2] NoOp(“PJSIP/2103-00000000”, “”) in new stack
85226 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:3] NoOp(“PJSIP/2103-00000000”, “off”) in new stack
85227 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:4] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
85228 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:5] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
85229 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:6] Set(“PJSIP/2103-00000000”, “HOTDESCKCHAN=2103-00000000”) in new stack
85230 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:7] Set(“PJSIP/2103-00000000”, “HOTDESKEXTEN=2103”) in new stack
85231 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:8] Set(“PJSIP/2103-00000000”, “HOTDESKCALL=0”) in new stack
85232 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:9] ExecIf(“PJSIP/2103-00000000”, “0?Set(HOTDESKCALL=1)”) in new stack
85233 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:10] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(name)=)”) in new stack
85234 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:11] Set(“PJSIP/2103-00000000”, “ALLOWTHISROUTE=NO”) in new stack
85235 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:12] ExecIf(“PJSIP/2103-00000000”, “0?Set(ALLOWTHISROUTE=YES)”) in new stack
85236 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:13] ExecIf(“PJSIP/2103-00000000”, “0?Hangup()”) in new stack
85237 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:14] ExecIf(“PJSIP/2103-00000000”, “0?Set(REALCALLERIDNUM=2103)”) in new stack
85238 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:15] ExecIf(“PJSIP/2103-00000000”, “0?Set(AMPUSER=2103)”) in new stack
85239 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:16] GotoIf(“PJSIP/2103-00000000”, “1?normcid”) in new stack
85240 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (macro-outbound-callerid,s,20)
85241 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:20] Set(“PJSIP/2103-00000000”, “USEROUTCID=773-989-7433”) in new stack
85242 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:21] Set(“PJSIP/2103-00000000”, “EMERGENCYCID=773-989-7433”) in new stack
85243 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:22] ExecIf(“PJSIP/2103-00000000”, “0?Set(EMERGENCYCID=)”) in new stack
85244 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:23] Set(“PJSIP/2103-00000000”, “TRUNKOUTCID=17739896927”) in new stack
85245 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:24] GotoIf(“PJSIP/2103-00000000”, “1?trunkcid”) in new stack
85246 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx_builtins.c: Goto (macro-outbound-callerid,s,30)
85247 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:30] ExecIf(“PJSIP/2103-00000000”, “1?Set(CALLERID(all)=17739896927)”) in new stack
85248 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:31] ExecIf(“PJSIP/2103-00000000”, “1?Set(CALLERID(all)=773-989-7433)”) in new stack
85249 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:32] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(all)=)”) in new stack
85250 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:33] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(all)=2103)”) in new stack
85251 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:34] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERID(all)=2103)”) in new stack
85252 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:35] Set(“PJSIP/2103-00000000”, “TIOHIDE=no”) in new stack
85253 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:36] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
85254 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:37] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
85255 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:38] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
85256 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:39] ExecIf(“PJSIP/2103-00000000”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
85257 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:40] Set(“PJSIP/2103-00000000”, “CDR(outbound_cnum)=7739897433”) in new stack
85258 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-outbound-callerid:41] Set(“PJSIP/2103-00000000”, “CDR(outbound_cnam)=”) in new stack
85259 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:14] GosubIf(“PJSIP/2103-00000000”, “1?sub-flp-1,s,1()”) in new stack
85260 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:1] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85261 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:2] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85262 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:3] ExecIf(“PJSIP/2103-00000000”, “0?Set(TARGET_FLP_1=2247302621)”) in new stack
85263 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:4] GotoIf(“PJSIP/2103-00000000”, “0?match”) in new stack
85264 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:5] ExecIf(“PJSIP/2103-00000000”, “0?Set(TARGET_FLP_1=2247302621)”) in new stack
85265 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:6] GotoIf(“PJSIP/2103-00000000”, “0?match”) in new stack
85266 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:7] ExecIf(“PJSIP/2103-00000000”, “0?Set(TARGET_FLP_1=247302621)”) in new stack
85267 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:8] GotoIf(“PJSIP/2103-00000000”, “0?match”) in new stack
85268 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:9] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85269 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:10] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85270 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:11] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85271 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:12] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85272 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:13] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85273 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:14] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85274 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:15] ExecIf(“PJSIP/2103-00000000”, “0?Return()”) in new stack
85275 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-flp-1:16] ExecIf(“PJSIP/2103-00000000”, “1?Return()”) in new stack
85276 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:15] Set(“PJSIP/2103-00000000”, “OUTNUM=12247302621”) in new stack
85277 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:16] Set(“PJSIP/2103-00000000”, “custom=DAHDI/R0”) in new stack
85278 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:17] ExecIf(“PJSIP/2103-00000000”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)”) in new stack
85279 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:18] ExecIf(“PJSIP/2103-00000000”, “0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))”) in new stack
85280 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:19] Macro(“PJSIP/2103-00000000”, “dialout-trunk-predial-hook,”) in new stack
85281 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“PJSIP/2103-00000000”, “”) in new stack
85282 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:20] GotoIf(“PJSIP/2103-00000000”, “0?skipcrm”) in new stack
85283 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:21] Set(“PJSIP/2103-00000000”, “__CRM_DIRECTION=OUTBOUND”) in new stack
85284 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:22] Set(“PJSIP/2103-00000000”, “__CRM_DESTINATION=12247302621”) in new stack
85285 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:23] Set(“PJSIP/2103-00000000”, “__CRM_SOURCE=2103”) in new stack
85286 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:24] AGI(“PJSIP/2103-00000000”, “agi://127.0.0.1/sangomacrm.agi”) in new stack
85287 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] res_agi.c: <PJSIP/2103-00000000>AGI Script agi://127.0.0.1/sangomacrm.agi completed, returning 0
85288 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:25] Set(“PJSIP/2103-00000000”, “CHANNEL(hangup_handler_push)=crm-hangup,s,1”) in new stack
85289 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:26] NoOp(“PJSIP/2103-00000000”, “CRM Finished”) in new stack
85290 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:27] GotoIf(“PJSIP/2103-00000000”, “0?bypass,1”) in new stack
85291 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:28] ExecIf(“PJSIP/2103-00000000”, “1?Set(CONNECTEDLINE(num,i)=12247302621)”) in new stack
85292 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:29] ExecIf(“PJSIP/2103-00000000”, “1?Set(CONNECTEDLINE(name,i)=CID:7739897433)”) in new stack
85293 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:30] ExecIf(“PJSIP/2103-00000000”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)7739897433)”) in new stack
85294 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:31] GotoIf(“PJSIP/2103-00000000”, “0?customtrunk”) in new stack
85295 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:32] ExecIf(“PJSIP/2103-00000000”, “0?Set(DIAL_TRUNK_OPTIONS=)”) in new stack
85296 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:33] Set(“PJSIP/2103-00000000”, “HASH(__SIPHEADERS,Alert-Info)=unset”) in new stack
85297 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@macro-dialout-trunk:34] Dial(“PJSIP/2103-00000000”, “DAHDI/R0/12247302621,300,Tb(func-apply-sipheaders^s^1,(1))U(sub-send-obroute-email^12247302621^12247302621^1^1635161285^^7739897433)”) in new stack
85298 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] app_stack.c: DAHDI/8-1 Internal Gosub(func-apply-sipheaders,s,1(1)) start
85299 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:1] ExecIf(“DAHDI/8-1”, “0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
85300 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:2] NoOp(“DAHDI/8-1”, “Applying SIP Headers to channel DAHDI/8-1”) in new stack
85301 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:3] Set(“DAHDI/8-1”, “TECH=DAHDI”) in new stack
85302 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:4] Set(“DAHDI/8-1”, “SIPHEADERKEYS=Alert-Info”) in new stack
85303 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:5] While(“DAHDI/8-1”, “1”) in new stack
85304 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:6] Set(“DAHDI/8-1”, “sipheader=unset”) in new stack
85305 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:7] ExecIf(“DAHDI/8-1”, “0?SIPRemoveHeader(Alert-Info:)”) in new stack
85306 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:8] ExecIf(“DAHDI/8-1”, “0?Set(PJSIP_HEADER(remove,Alert-Info)=)”) in new stack
85307 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:9] ExecIf(“DAHDI/8-1”, “0?Set(sipheader=http://127.0.0.1;info=unset)”) in new stack
85308 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:10] ExecIf(“DAHDI/8-1”, “0?Set(sipheader=http://127.0.0.1unset)”) in new stack
85309 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:11] ExecIf(“DAHDI/8-1”, “0?SIPAddHeader(Alert-Info:unset)”) in new stack
85310 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:12] ExecIf(“DAHDI/8-1”, “0?Set(PJSIP_HEADER(add,Alert-Info)=unset)”) in new stack
85311 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:13] EndWhile(“DAHDI/8-1”, “”) in new stack
85312 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:5] While(“DAHDI/8-1”, “0”) in new stack
85313 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] pbx.c: Executing [s@func-apply-sipheaders:14] Return(“DAHDI/8-1”, “”) in new stack
85314 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] app_stack.c: Spawn extension (from-analog, 12247302621, 1) exited non-zero on ‘DAHDI/8-1’
85315 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] app_stack.c: DAHDI/8-1 Internal Gosub(func-apply-sipheaders,s,1(1)) complete GOSUB_RETVAL=
85316 [2021-10-25 06:28:05] VERBOSE[3818][C-00000001] app_dial.c: Called DAHDI/R0/12247302621
85317 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] app_dial.c: DAHDI/8-1 answered PJSIP/2103-00000000
85318 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] app_stack.c: DAHDI/8-1 Internal Gosub(sub-send-obroute-email,s,1(12247302621,12247302621,1,1635161285,7739897433)) start
85319 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-send-obroute-email:1] GotoIf(“DAHDI/8-1”, “0?sendEmail”) in new stack
85320 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-send-obroute-email:2] NoOp(“DAHDI/8-1”, “email notifications disabled…exiting.”) in new stack
85321 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] pbx.c: Executing [s@sub-send-obroute-email:3] Return(“DAHDI/8-1”, “”) in new stack
85322 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] app_stack.c: Spawn extension (from-analog, , 1) exited non-zero on ‘DAHDI/8-1’
85323 [2021-10-25 06:28:09] VERBOSE[3818][C-00000001] app_stack.c: DAHDI/8-1 Internal Gosub(sub-send-obroute-email,s,1(12247302621,12247302621,1,1635161285,7739897433)) complete GOSUB_RETVAL=
85324 [2021-10-25 06:28:09] VERBOSE[3873][C-00000001] bridge_channel.c: Channel DAHDI/8-1 joined ‘simple_bridge’ basic-bridge

david55 · October 25, 2021, 12:06pm

Your log indicates that the call worked. You need to explain what you mean by “didn’t work”. (But note that signalling on analogue lines is very primitive, and Asterisk cannot tell whether a call is ringing, or, in most cases, answered; you have to listen to the audio.)

Your subject indicates that your problems are with analogue lines, so SIP is irrelevant here.

Also, you refer to another thread, but don’t link to it, so I’ve only looked at the current article in isolation.

wbreen045 · October 25, 2021, 12:08pm

On my Phone a Polycom SoundPoint ip311 it shows CID:My company’s caller ID for about 15 seconds and then hangs up. Testing calling my cellphone never rings. Sorry should have stated that.

wbreen045 · October 25, 2021, 12:14pm

And I am an idiot! I figured it out, they are not actual POTS lines the system thinks they are though as they come out of ATA’s from our provider, then plug into the Digium board they were hosed from all the reboot and moving things around tonight. I bounced them and now the calls go through, BUT thank you David, I would not have looked if you would not have told me that the log appeared as though the call was being placed!! Lesson learned!

Bill

system · November 25, 2021, 12:14pm

This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.